• 한국주조공학회지
• /
• 제13권5호
• /
• pp.450-461
• /
• 1993

AC4C alloy casts in the metallic mold, zircon sand mold, silica sand mold and shell mold with the pouring temperatures of 680, 710 and $740^{\circ}C$ have been investigated. The tensile strength, elongation and hardness of AC4C alloy castings have been influenced by the kind of molds used. The mechanical properties in zircon sand mold castings were greater than those in other sand mold castings, but were inferior to the properties in metallic mold castings. Eutectic Si particle size and DAS were increased in the order of metallic mold, ziron sand mold, silica sand mold and shell mold. Also, they were increased with the increase of pouring temperatures. DAS, eutectic Si particle size and grain size decreased with the increase of mechanical properties as the cooling rate increased. The eutectic Si particle size and DAS of AC4C alloy castings after T6 treatment were decreased in as-cast. The variation of eutectic Si particle size has been effected on the tensile strength, elongation and fractured surface.

• Bulletin of the Korean Chemical Society
• /
• 제30권1호
• /
• pp.129-132
• /
• 2009

Monodisperse ZnS colloidal particles with precisely specified diameters over a broad size range were synthesized by controlled aggregation. Sub-10nm ZnS seed crystals were first nucleated at ambient temperature and then grown at an elevated temperature, which produced large polydisperse colloidal particles. Subsequent rapid thermal quenching and heating processes induced a number of secondary nucleations in addition to growing the large polydisperse microparticles which were finally removed by centrifugation and discarded at the completion of the reaction. The secondary nuclei were then aggregated further at elevated temperatures, resulting in colloidal particles which exhibited a nearly monodisperse size distribution. Particle diameters were controlled over a wide size range from 50 nm to 1 μm. Mie simulations of the experiment extinction spectra determined that the volume fraction of the ZnS is 0.66 in an aggregated colloidal particle and the colloidal particle effective refractive index is approximately 2.0 at 590 nm in water. The surface of the colloidal particles was subsequently coated with silica to produce ZnS@silica core-shell particles.

• 공업화학
• /
• 제27권4호
• /
• pp.449-454
• /
• 2016

본 연구에서는 구형의 폴리스티렌 구슬을 틀로 사용하여, 크기분포가 좁으면서 속은 비어있고 벽이 다공성인 구조의 탄소 마이크로 캡슐을 합성하였다. 폴리스티렌의 표면은 무기물인 실리카졸이 쉽게 입혀질 수 있도록 폴리비닐피롤리돈(PVP)을 코팅하여 변조하였다. PVP가 코팅된 PS 마이크로 입자표면에 SBA-16 졸을 부착시킨 다음, 실리카층에 존재하는 중간 크기의 세공 내에 탄소원을 채워 넣는 음각식 형뜨기법을 적용함으로써 속이 빈 구조의 탄소 마이크로캡슐을 제조하였다. 탄화과정을 거치고 틀로 사용한 다공성 실리카입자를 HF로 용해하면, 좁은 입자크기분포를 갖는 중간세공이 함유된 계란껍질형의 탄소입자를 얻을 수 있었다. 계란껍질형 탄소 마이크로캡슐 입자의 다공성과 전기화학적 특성은 XRD, SEM, TEM, 질소분자 흡/탈착분석법 및 cyclic voltammetry법으로 평가하였다. 이들 탄소입자는 슈퍼캐패시터와 같은 전자재료로서 유효하게 사용될 만한 높은 전기전도도와 용량을 나타내었다.

• 대한화장품학회지
• /
• 제30권3호
• /
• pp.321-328
• /
• 2004

주형합성법을 이용하여 메조기공(mesoporous pore)을 지닌 나노실리카 물질들과 나노카본볼의 대량생산법이 개발되었다. 암모니아, 트리메틸아민, 아세트알데히드 그리고 메틸메르캅탄과 같은 악취 물질들이 마크로기공 코어-메조기공 쉘(macro-porous core/mesoporous shell) 구조체인 나노카본볼에 흡착되는 현상이 상업용 탈취제인 활성탄과 비교 조사되었다. 나노카본볼에서의 악취의 흡착 및 분해는 활성탄에 비해 우수하게 관측되었고 촉매가 나노카본볼 내부에 첨착되면 더욱 악취 분해 특성이 증가되었다. 나노카본볼의 우수한 흡착 및 분해 특성을 이해하기 위해 물리화학적 특성인 균일한 기공, 넓은 표면적, 큰 기공 부피에 관한 기공 특성과 악취의 분해 현상이 연구되었다. 이러한 나노카본볼은 탈취제 분야에서 많은 응용성이 있을 것으로 전망된다.

• 한국물환경학회지
• /
• 제27권1호
• /
• pp.98-103
• /
• 2011

Photocatalysis using UV light and catalysts is an attractive low temperature and non-energy- intensive method for remediation of a wide range of chemical contaminants like chloroform (CF). Recently development of environmental friendly and sustainable catalytic systems is needed before such catalysts can be routinely applied to large-scale remediation or drinking water treatment. Titanium dioxide is a candidate material, since it is stable, highly reactive, and inexpensive. Diatoms are photosynthetic, single-celled algae that make a microscale silica shell with nano scale features. These diatoms have an ability to biologically fabricate $TiO_2$ nanoparticles into this shell in a process that parallels nanoscale silica mineralization. We cultivated diatoms, metabolically deposited titanium into the shell by using a two-stage photobioreactor and used this biogenic $TiO_2$ to this study. In this study we evaluated how effectively biogenic $TiO_2$ nanoparticles transform CF compared with chemically-synthesized $TiO_2$ nanoparticlesthe and effect of pretreatment of diatom-produced $TiO_2$ nanoparticles on photocatalytic transformation of CF. The rate of CF transformation by diatom-$TiO_2$ particles is a factor of 3 slower than chemically-synthesized one and chloride ion production was also co-related with CF transformation, and 79~91% of CF mineralization was observed in two $TiO_2$ particles. And the period of sonication and mass transfer due to particle size, evaluated by difference of oxygen tention does not affect on the CF transformation. Based on the XRD analysis we conclude that slower CF transformation by diatom-$TiO_2$ might be due to incomplete annealing to the anatase form.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.810-813
• /
• 2003

Application of inorganic silica-neodymia alloy films grown by sputtering technology to the dielectric layer of plasma display panel (PDP) is presented. The experimental results reveal that dielectric constant of the alloy films increases with neodymia concentration. Also, the alloy films act as band rejection color filter owing to sharp absorptions originating in the intratransition within the 4f shell of the $Nd^{3+}$ ion. In the optical band pass region, the transmittances of the alloy films show higher than those of commercial glass-like dielectrics. As a result, the luminance of PDP device with the alloy dielectric layer is higher than that of device with conventional dielectrics, indicating wider color gamut and higher color purity.

• Nuclear Engineering and Technology
• /
• 제44권8호
• /
• pp.971-976
• /
• 2012

Silica-coated Au with Ag, Co, Cu, and Ir bimetallic radioisotope nanoparticles were synthesized by neutron irradiation, after coating $SiO_2$ onto the bimetallic particles by the sol-gel St$\ddot{o}$ber process. Bimetallic nanoparticles were synthesized by irradiating aqueous bimetallic ions at room temperature. Their shell and core diameters were recorded by TEM to be 100 - 112 nm and 20 - 50 nm, respectively. The bimetallic radioisotope nanoparticles' gamma spectra showed that they each contained two gamma-emitting nuclides. The nanoparticles could be used as radiotracers in petrochemical and refinery processes that involve temperatures that would decompose conventional organic radioactive labels.

• 한국결정학회:학술대회논문집
• /
• 한국결정학회 2002년도 정기총회 및 추계학술연구발표회
• /
• pp.49-49
• /
• 2002

A strategy for the synthesis of more stable and large periodic mesoporous organo-silica materials has been developed for the 2D hexagonal mesoporous organosilica by the core-shell approach using nonionic PEO-PLGA-PEO triblock copolymer templates. The BET surface area of the solvent-extracted hexagonal mesoporous organosilica is estimated to be 1,016 ㎡/g and the pore volume, pore diameter, and wall thickness are 1.447 ㎤/g, 65 Å, and 43 Å, respectively. More hydrophobic PLGA block than the PPO block used for templates of mesoporous silica proves to be quite effective in confining the organosilicates within the PEO phase. Reaction temperature and acid concentration of an initial solution as well as the chemical nature of the bloc k copolymer templates also demonstrate to be important experimental parameters for ordered organosilica mesophase. Moreover, the mesoporous organosilicas prepared with the PEO-PLGA-PEO block templates maintain their structural integrity for up to 25 days in boiling water at 100℃. The mesoporous materials with large pores and high hydrothermal stability prepared in this study has a potential for many applications.

• Bulletin of the Korean Chemical Society
• /
• 제24권4호
• /
• pp.499-503
• /
• 2003

Encapsulation of L-ascorbic acid (vitamin C) within a bio-compatible layered inorganic material was achieved by coprecipitation reaction, in which the layered inorganic lattice and its intercalate of vitamin C are simultaneously formed. The nano-meter sized powders of vitamin C intercalate thus prepared was again encapsulated with silica nano-sol to form a nanoporous shell structure. This ternary nanohybrid of vitamin Clayered inorganic core-$SiO_2$ shell exhibited an enhanced storage stability and a sustained releasing of vitamin C. Furthermore, the nano-encapsulation of vitamin C with inorganic mineral was very helpful in delivering vitamin C molecules into skin through stratum corneum, facilitating transdermal penetration of vitamin C in topical application.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.220-220
• /
• 2003

The microencapsulation of droplets or particles within a solid shell leads to the formation of core-shell particles. Microencapsulation provides protection and controlled release of core materials such as drugs, vitamins, enzymes, perfumes, and the like. Such particles have, therefore, found a diverse range of applications in the pharmaceutical, agricultural, cosmetic, and food industries. UV absorbers are widely used for cosmetics to screen out ultra violet (UV) rays which have side effects on human skin. The absorbers are made generally from synthetic organic compounds, which can stimulate the human skins to develop allergic phenomena.