• Structural Engineering and Mechanics
• /
• v.92 no.1
• /
• pp.89-97
• /
• 2024

Discarded cigarette butts in the environment have caused significant pollution. Therefore, providing solutions to address these environmental issues is of great importance. Concrete is known as one of the most widely used materials around the world. Hence, this study investigates the feasibility of using cigarette butts to product concrete. For this purpose, cellulose acetate fibers obtained from cigarette butt filters were added to silica fume concrete in 10 different volume ratios. Then, the mechanical properties of the concrete samples, including compressive strength, Brazilian tensile strength, and flexural tensile strength, were examined. Based on the results, adding fibers to silica fume concrete improved the mechanical properties of the concrete. Among the 10 mixing designs, adding 0.2% by volume of fibers to silica fume concrete yielded the highest compressive and tensile strengths. In other words, adding 0.2% by volume of fibers resulted in a 16% and 34% increase in compressive strength and a 70% and 38% increase in Brazilian tensile strength at 7 and 28 days, respectively, compared to the state without cellulose acetate fibers. Additionally, the flexural tensile stress capacity increased by 56%. Furthermore, the vertical deformation tolerance in beam specimens increased by 287%, and the energy absorption capacity of the concrete beam also significantly increased. Consequently, along with the significant improvement in the mechanical properties of concrete, this study proposes a new and practicalstrategy to addressthe environmental issues caused by waste cigarette butts.

• Advances in concrete construction
• /
• v.1 no.2
• /
• pp.151-162
• /
• 2013

The performance characteristics of high-strength and high-performance concrete are discussed in this review. Recent developments in the field of high-performance concrete marked a giant step forward in high-tech construction materials with enhanced durability, high compressive strength and high modulus of elasticity particularly for industrial applications. There is a growing awareness that specifications requiring high compressive strength make sense only when there are specific strength design advantages. HPC today employs blended cements that include silica fume, fly ash and ground granulated blast-furnace slag. In typical formulations, these cementitious materials can exceed 25% of the total cement by weight. Silica fume contributes to strength and durability; and fly ash and slag cement to better finish, decreased permeability, and increased resistance to chemical attack. The influences of various mineral admixtures such as fly ash, silica fume, micro silica, slag etc. on the performance of high-strength concrete are discussed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.1
• /
• pp.83-92
• /
• 1997

An experimental study of the application of Silica fume for the high strength concrete was conducted. Nine specimens with three different contents of silica fume, 0%, 10%, 20% and with three water-cement ratio 30%, 40%, 50% were tested. Results shows that 10% of silica fume and 30% of water-cement ratio has a maximum strength with 700kg/$cm^2$ of compressive strength and 64kg/$cm^2$ of splitting tensile strength and 100kg/$cm^2$ of flexural strength. Slump value of the tested samples decreases with increasing water-cement ratio and elapsed time of silica fume. Splitting tensile strength$({\sigma}_f)$ and flexural strength $({\sigma}_f)$ and static modulus of elasticity(E) can be correlated with compressive strength $({\sigma}_c)$ from a regression analysis.

• Advances in concrete construction
• /
• v.6 no.3
• /
• pp.297-309
• /
• 2018

The objective of this study was to evaluate the influence of silica fume (SF) on the hydration heat and compressive strength of concrete. Portland cement with w/(c+sf) ratios varying between 0.25 to 0.45 was substituted by 10%, 20% and 30% of SF by mass. A superplasticizer was used to maintain a fluid consistency of the concrete. The heat of hydration was monitored continuously by a semi-adiabatic calorimetric method for 10 days at $20^{\circ}C$. Compressive strengths are tested for each mixture until age of 180 days. The results show that silica fume considerably influences the evolution and the ultimate values of the compressive strengths as well as the hydration heat especially for 10% rate. The w/b ratio has a considerable effect where its decrease modifies compressive strength and hydration heat more than silica fume. The correlation of the obtained results allows deducing of ultimate properties as well as the ages to reach half of their values. The correlation coefficients are close to unity and reflect the judicious choice of these relationships to be used to predict compressive strength and hydration heat.

• Structural Engineering and Mechanics
• /
• v.64 no.2
• /
• pp.243-257
• /
• 2017

Investigating the properties and durability of high-strength concrete exposed to sulfuric acid attack for the purpose of its application in structures exposed to this acid is of outmost importance. In this research, the resistance and durability of high-strength concrete containing macro-polymeric or steel fibers together with the pozzolans of silica fume or nano-silica against sulfuric acid attack are explored. To accomplish this goal, in total, 108 high-strength concrete specimens were made with 9 different mix designs containing macro-polymeric and steel fibers at the volume fractions of 0.5, 0.75, and 1.0%, as well as the pozzolans of silica fume and nano-silica with the replacement levels of 10 and 2%, respectively. After placing the specimens inside a 5% sulfuric acid solution in the periods of 7, 21, and 63 days of immersion, the effect of adding the fibers and pozzolans on the compressive properties, ultrasonic pulse velocity (UPV), and weight loss of high-strength concrete was investigated and the respective results were compared with those of the reference specimens. The obtained results suggest the dependency of the resistance and durability loss of high-strength concrete against sulfuric acid attack to the properties of fibers as well as their fraction in concrete volume. Moreover, compared with using nano-silica, using silica fume in the fibrous concrete mix leads to more durable specimens against sulfuric acid attack. Finally, an optimum solution for the design parameters where the crushing load of high-strength fibrous concrete is maximized was found using response surface method (RSM).

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.133-136
• /
• 1994

This study is to investigate properties of the ultra high-strength concrete using silica rume and fly ash. For this purpose, the properties of fresh concrete and hardened concrete are examined with varing water-cement ratio, silica fume and fly ash content and so on. From these test results, it is possible to maunfacture the miximum strength of 1, 200kg/$\textrm{cm}^2$ with cement content 800kg/$\textrm{m}^3$, 18% water-cement ratio, 105 silica fume content.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.429-434
• /
• 1994

In this study, an experiment in the field was performed to analyze the variations of rebound ratios of SFRS with silica fume after fabricating the panels and placing the plain concrete of simulting a base rock with thickness 7cm. And the experimental parameters which are the reinforcing methods(steel fiber, wire mesh), steel fiber contents(0.0%, 0.5%, 0.75%, 1.0%), silica fume contents(0.0%, 10.0%), and the three parts(lower, middle, upper part) were chosen. According to the results of the lower part in this test, the larger the fiber contents are in case of steel fiber reinforced shotcrete, the less the rebound ratios are within the range of 20~35%, compared to the wire-mesh reinforced shotcrete with silica fume content of 10%, and these results are true of the middle and upper part, respectively. In addition, the four-stage phenomena of the rebound of SFRS were estimated on the base of a series of the test results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.04a
• /
• pp.142-147
• /
• 1994

Lately, among concrete component used in construction works, the aggregate is the most important material because it hold about 70~80 Vo1% of most structural materials. Considering that the demand of aggregate is on the continuous increase in the construction works year after year, it is a very urgent thing to develop a substitute aggregate for river aggregate. This paper, an experimental study on the effect of corrosion protection by tighting concrete used fly-ash and silica fume, is to investigate workability and engineering properties of concrete used fly-ash and silica fume. As a test results, contrary to SF, workability of concrete used FA is inclined to be improved. And in the case of containing SF, the compressive strength containing admixtures is higher than plain concrete with increasing curing age.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.215-225
• /
• 2011

Metakaolin is a dehydroxylated form of the clay mineral kaolinite. Rocks that are rich in kaolinite are known as china clay or kaolin, traditionally used in the manufacture of porcelain. The particle size of metakaolin is smaller than cement particles, but not as fine as silica fume. This paper investigates the effect of the concrete containing metakaolin as a mineral admixture on the compressive strength and resistance properties to chloride ion penetration. In this study, the experiment was carried out to investigate and analyze the influence of replacement ratio of metakaolin and micro silica fume on the compressive strength and chlorine ion penetration resistance of concrete. All levels were water/binder ratio 30%, replacement ratio of metakaolin and silica fume were 0, 5, 10, 15, 20% respectively. The compressive strength of concrete using metakaolin tends to increase, as the replacement ratio increases but the chlorine ion penetration resistance was not so as lager as silica fume concrete. Therefore, the optimum mixing ratio of metakaoline to satisfy a properties of compressive strength and chlorine ion penetration resistance was was approximately10%.

• Advances in concrete construction
• /
• v.14 no.1
• /
• pp.71-77
• /
• 2022

Creep phenomenon affects the stability and integrity of concrete structures. An inaccurate prediction of these strains may lead to the appearance of cracks and excessive deflections which may cause in some cases the demolition of structures. In fact, the measured values of these uncontrolled strains appear often to be clearly different and larger than the expected ones. Therefore, an accurate prediction of concrete deformations is a necessity. As a matter of fact, the codified descriptions of this phenomenon are unreliable and don't consider the effect of admixtures. The physical nature of creep is not well understood and almost all creep models are mainly of empirical nature. To overcome this issue, a study of the correlation between different parameters affecting concrete creep is performed and a new model for predicting creep of concrete is elaborated. This new model considers the effect of admixtures, specifically the silica fume, in predicting concrete creep and allows an accurate prediction of this phenomenon. The proposed model is based on the observation of physical behavior of creep phenomenon. It targets at expressing creep compliance in terms of structural and environmental parameters. In fact, the experimental observations show that creep curves follow two kinetic regimes leading to a model called Phenomenological Creep Model. By adequate regressions and substitutions, and according to this model, we can express creep compliance in terms of structural, environmental parameters and admixture types and percentage. The proposed new Phenomenological Creep Model Silica Fume (PCM19SF) calculates accurately creep of concrete by considering the effect of silica fume.