• 고무기술
• /
• 제9권1호
• /
• pp.1-12
• /
• 2008

Effects of silane modifier, bis(triethoxysilylpropyl) tetrasulfide (TESPT(S4)) and bis(triethoxysilylpropyl) disulfide (TESPD(S2)), on silica filled compound were investigated upon processability, dynamic, mechanical, heat build-up, blowout properties, and silica dispersion in natural rubber (NR). The temperature of the S2 treated silica compound generated higher than that of the S4 treated compound during internal mixer compounding. The shear viscosity of the S2 compound exhibited lower than that of the S4 compound and the viscosity measured in dynamic mode was close to each other. The elongation modulus of the S2 compound exhibited lower than that of the S4; however, the tear resistance strength of the S2 compound exhibited higher than that of the S4 compound. The loss tan$\delta$ values of the S2 compound exhibited higher than those of the S4 at room temperature. The augmentation of the test temperature lowered the tan$\delta$ values of each compound, which results in close tan$\delta$ values to each other at $100^{\circ}C$. The S2 compound deformed less than the S4 compound, and the blowout time of each compound was close to each other. The S2 compound generated more heat build-up than the S4 compound. The abrasion loss of the S2 compound was less than that of the S4 compound. The size of the silica agglomerate reduced on both S4 and S2 compounds upon vulcanization. The addition of the bifunctional silanes (S2 and S4) on silica filled NR compound improved the processability of each compound and their effects were more significant on the S2 compound than the S4 compound. After vulcanization the silica agglomerate size of each compound reduced compared with before vulcanization.

• 한국의류산업학회지
• /
• 제6권5호
• /
• pp.667-672
• /
• 2004

Poly(ethylene terephthalate) (PET) fabrics were treated with a silica particle and phosphate flame retardant to determine the optimum process condition of the digital textile printing(DTP) media. The treating conditions for the study were 6 conditions, from F1 to F6, in which F3, F4 and F5 were treated with mixture of both silica particle and phosphate compound in process of pad, dry and cure fixation. F6 was treated with phosphate compound only and silica particle coating successively. Xanthan gum was used to control the migration of liquid phosphate compound onto PET fabrics. The change in surface morphology of fabrics treated with silica particle and phosphate compound was observed by SEM and flame retardance was evaluated by limiting oxygen index(LOI). It was observed that F6 was the excellent flame retardance and low bleeding in printing, Collectively, the printing characteristics of silica to cyan, magenta, yellow and black ink and flame retardance of fabrics finished with phosphate compound were identified in this study.

• Elastomers and Composites
• /
• 제56권2호
• /
• pp.72-78
• /
• 2021

A phase-change material (PCM) is a material that has the ability to delay heat transfer by absorbing heat from its environment or releasing heat to its environment while its phase changes from solid to liquid or liquid to solid at a specific temperature. As it is applied, it can contribute to environmental conservation such as energy savings and carbon dioxide emission reduction. In order for a PCM to store and release heat, the volume change during its phase transition should be large, and thus a phase transition space is required. When a PCM is used as a polymer additive, it is confined within the polymer, and there is no phase transition space; thus, its ability to absorb and release heat is significantly reduced. Therefore, in this study, porous silica was used to provide EVA/PCM compounds with sufficient space for their phase transition, and to improve the compatibility between the EVA and PCM, modified silica is used: surface-modified 5 wt% silica with 3-methacryloxypropyltrimethoxysilane. The compound was prepared and compared with the silica compound. The presence or absence of the modified silica surface modification was confirmed using Fourier-transform infrared spectroscopy and thermogravimetric analysis, the heat capacity of the compound was evaluated based on a differential scanning calorimetry analysis, and its mechanical strength and morphology were determined using scanning electron microscopy.

• Elastomers and Composites
• /
• 제44권3호
• /
• pp.252-259
• /
• 2009

양기능성실란(TESPD)이 실리카가 함유된 SBR 복합 소재에 첨가되었을 시 그에 따른 가교특성, 가공정도, 물리적 특성들에 미치는 영향을 조사하였다. TESPD를 첨가한 SBR 복합 소재는 TESPD가 실리카와 고무를 화학적으로 결합하여 3차원적인 구조를 형성함으로해서 가교밀도가 증가하였고, 이에 따라 기계적 강도가 증가하였다. 이는 또한 TESPD를 첨가하지 않은 소재와 비교했을 시 가공성이 증가하였다.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.510-515
• /
• 2011

In this study, as a material used to replace silica fumes for high strength concrete, nano-silica compound with organic functional group for dispersion and with inorganic silica group that can cause a pozzolan reaction is synthesized, These nano silica compound is divided into IC, which is nano size $SiO_2$ with irregularly combined hydroxyl group and carboxyl group, and RC, which is nano size $SiO_2$ with regularly combined hydroxyl group and carboxyl group. The effects of these nano silica compound on the hydration of cement are reviewed. As a result, all of synthesized nano-silica compounds have excellent dispersion on the cement flow, we think that dispersion property is the effect of air entraining by synthesized nano-silica compounds. The result of the microstructure observation showed that the particle size of the synthesized nano-silica is smaller than silica fume and spread evenly among the cement particles. In initial The phenomenon of strength decreasing occurred due to delayed hydration reaction by the synthesized nano-silica with carboxyl(-COOH) and hydroxyl(-OH) functional group.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.257-257
• /
• 2013

In order to selectively remove oil and organic compound from water, silica nanoparticles with hydrophobic coating was used. Since silica nanoparticles are generally hydrophilic, removal efficiency of oil and organic compound, such as toluene, in water can be decreased due to competitive adsorption with water. In order to increase the removal efficiency of oil and toluene, hydrophobic polydimethylsiloxane (PDMS) was coated on silica nanoparticles in the form of thin film. Hydrophobic property of the PDMS-coated silica nanoparticles and hydrophilic silica nanoparticles were easily confirmed by putting it in the water, hydrophilic particle sinks but hydrophobic particle floats. PDMS coated silica nanoparticles were dispersed on a slide glass with epoxy glue on and the water contact angle on the surface was determined to be over $150^{\circ}$, which is called superhydrophobic. FT-IR spectroscopy was used to check the functional group on silica nanoparticle surface before and after PDMS coating. Then, PDMS coated silica nanoparticles were used to selectively remove oil and toluene from water, respectively. It was demonstrated that PDMS coated nanoaprticles selectively aggregates with oil and toluene in the water and floats in the form of gel and this gel remained floating over 7 days. Furthermore, column filled with hydrophobic PDMS coated silica nanoparticles and hydrophilic porous silica was prepared and tested for simultaneous removal of water-soluble and organic pollutant from water. PDMS coated silica nanoparticles have strong resistibility for water and has affinity for oil and organic compound removal. Therefore PDMS-coated silica nanoparticles can be applied in separating oil or organic solvents from water.

• Elastomers and Composites
• /
• 제32권5호
• /
• pp.318-324
• /
• 1997

Since the rigid and continuous networks of high-purity silica(white carbon) were relatively transparent to microwaves, high purity silica coupled with microwaves using a zirconia susceptor at room temperature and it was then heated to its melting temperature. The low-purity silica, contained small amount of impurities, yielded greater microwave absorption owing to easy motion of the interstitial alkali ions and it was then heated to its melting temperature. X-ray diffraction patterns of the low-purity silica were broader than those of the high-purity silica due to higher concentration of non-bridging bond and more deformed random network structure. In the vulcanization process of whitened or coloured rubber compound which is employing low-purity silica(white carbon) as a reinforcing filler, vulcanizate could be obtained effectively by microwave heating energy.

• 폴리머
• /
• 제39권2호
• /
• pp.240-246
• /
• 2015

양기능성 실란 커플링제인 bis(triethoxysilylpropyl)tetrasulfide(TESPT)가 실리카/천연고무 복합소재 내에서 실리카의 hydroxy기와 고무 계면간에 화학적 결합반응을 하여 실리카-실란-고무간의 3차원 사슬구조를 형성한 것을 열분해 가스 크로마토그래피 질량분석기(Py-GC/MS)와 주사전자현미경(SEM)을 통해 관찰하였다. TESPT의 첨가로 배합물 내의 황 함유율이 증가하여 스코치 시간($t_{10}$)은 감소하고, TESPT 내 sulfur donor 역할을 하는 황이 활성화제 및 촉진제와의 복합반응으로 가교반응이 지속적으로 이루어짐에 따라서 가교속도지수(CRI)의 값이 감소하였다. 또한 TESPT가 첨가된 컴파운드는 첨가되지 않은 컴파운드에 비해 가공성 및 기계적 물성이 향상되었다. 결과적으로, 실리카로 충전된 천연고무 복합소재에 실란 커플링제(TESPT)가 첨가되어 화학반응으로 실리카-실란-고무간의 3차원 사슬구조가 형성됨을 관찰하였고 이에 따라 가교밀도가 증가하여 복합소재의 물성 증가에 기여함을 보여주었다.

• Elastomers and Composites
• /
• 제56권4호
• /
• pp.234-242
• /
• 2021

The demand for truck bus radial (TBR) tires with enhanced fuel efficiency and wear resistance have grown in recent years. In addition, as the issue of particulate matter and air pollution increases, efforts are being made to reduce the generation of particulate matter. In this study, the properties of epoxidized natural rubber (ENR) containing a silica-friendly functional group were evaluated by considering it as a base rubber and varying the silica ratio in this binary filler system. The results showed that the wear resistance of the NR/BR blend compound decreased as the silica ratio increased. In contrast, the ENR/BR blend compound exhibited an increase in wear resistance as the silica ratio was increased. In particular, the ENR-50/BR blend compound showed the best wear resistance due to the presence of several epoxide groups. Furthermore, we observed that for tan 𝛿 at 60℃, higher epoxide content resulted in the higher T_g of the rubber, indicating a higher tan 𝛿 at 60℃. On the other hand, it was confirmed that increasing the silica ratio decreased the value of tan 𝛿 at 60℃ in all compounds. In addition, we measured the amount of wear particulate matters generated from the compound wear. These measurements confirmed that in the binary filler system, regardless of the filler type, the quantity of the generated wear particulate matters as the filler-rubber interaction increased. In conclusion, the silica filled ENR/BR blend compound exhibited the lowest generation of wear particulate matters.

• Elastomers and Composites
• /
• 제56권4호
• /
• pp.223-233
• /
• 2021

In this study, epoxidized liquid isoprene rubber (E-LqIR) was used as a processing aid in a silica-filled natural rubber compound to improve the fuel efficiency, abrasion resistance, and oil migration problems of truck and bus radial tire tread. The wear resistance, fuel efficiency, and extraction resistance of the compound were evaluated according to the molecular weight of E-LqIR. Results of the evaluation showed that the E-LqIR compound had a lower chemical crosslink density than that of a treated distillate aromatic extract (TDAE) oil compound because of the sulfur consumption of E-LqIR. However, the filler-rubber interaction improved because of the reaction of E-LqIR with silica and crosslink with the base rubber by sulfur. As the molecular weight of E-LqIR increased, crosslink with sulfur was facilitated, and the filler-rubber interaction improved, resulting in improved abrasion resistance. The fuel efficiency performance of the E-LqIR compound was poorer than that of the TDAE oil compound because of the low chemical crosslink density and hysteresis loss at the free chain end of E-LqIR. However, the fuel efficiency performance improved as the molecular weight of E-LqIR increased.