• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.5
• /
• pp.31-47
• /
• 2021

The purpose of this study is to demonstrate the moderating effect of technology development activities in the relationship between independent variables such as entrepreneurial orientation and technology innovation capabilities and dependent variables. As a result of analyzing the causal relationship between research variables, it was found that the higher the innovation and initiative among the sub-factors of entrepreneurial orientation, the more positive the technical commercialization performance and product completion. Among the sub-factors of entrepreneurial orientation, risk-taking was found to have a significant effect only on product completion. It was found that the higher the technology commercialization capability and technology convergence capability, the higher the technology commercialization performance, the technology commercialization performance. As a result of analyzing the moderating effect of technology development activities, it was found that technology development management ability, a sub-factor of technology development activities, controls the influence relationship between innovation and risk sensitivity and technology performance. In addition, it was found that the involvement in technology development planning controls the influence relationship between technology convergence capability and technology performance among sub-factors of technology innovation capability. Based on the above analysis results, this study made three suggestions as follows. First, the achievements of technology commercialization to achieve the superiority of corporate competition depend on progressive innovation and risk-taking based on entrepreneurial orientation. It is necessary to find a way to build entrepreneurial orientation from within the organization. Second, due to the nature of the ICT industry, which has a fast pace of technological development and changes in market acceptance, technology commercialization performance will be positive when the capabilities, technology, knowledge, and resources that can quickly lead to product production can be organically linked. Finally, corporate CEOs need to further promote innovation and risk-taking through phased and continuous research activities for technology development. In addition, it is necessary to establish a corporate culture that tolerates various strategies and failures so that understanding of technology convergence can lead to technological performance.

• Knowledge Management Research
• /
• v.22 no.3
• /
• pp.151-172
• /
• 2021

The government's implementation of customer-friendly financial policies, such as lowering commission fees for credit card merchants and lowering the maximum interest rate, put the specialized credit finance companies in a crisis of lowering profitability. In this unfavorable situation, the efficiency study of specialized credit finance companies is meaningful. Accordingly, this study measured the efficiency of 34 specialized credit finance companies through Data Envelopment Analysis (DEA) and meta-frontier analysis. For meta-frontier analysis, specialized credit finance companies were divided into two groups (card companies and non-card companies) by industry or three groups (AA0 and above, AA-, and A+ or below) by credit rating. The results of the analysis will provide general insight into the efficiency of specialized credit finance companies. The results of this study are as follows. First, the average meta-efficiency of card companies was analyzed higher than that of non-card companies. Second, 80% of non-card's decision-making units (DMUs) were inefficient by pure technology rather than by scale. Third, decision-making units (DMUs), which account for 62.5% of the credit card company group and 80% of the 'AA-' credit rating group, are in non-economic areas of scale. Fourth, there was no statistically significant difference in meta-efficiency values (TE and PTE) by industry (card companies, non-card companies) and credit rating (AA0 or higher, AA-, A+ or lower). The contribution of this study will provide strategic initiatives for establishing management strategies to improve inefficiency by measuring the efficiency level of companies under an unfriendly business environment for specialized credit finance companies.

• Korean Journal of Food Science and Technology
• /
• v.53 no.4
• /
• pp.375-381
• /
• 2021

This study investigated the physicochemical properties and chemosensory characteristics of radish samples. Brix results in Matdong-radish showed the highest value (1.5±0.1%), and Mansahyungtong-radish showed the lowest. In terms of salinity, Mansahyungtong-radish had the highest value (1.2±0.1%), and there were no significant differences among samples except Mansahyungtong-radish. In pH analysis, Cheongjunggowon-radish had the highest value at 6.69±0.02. The pH in Mansahyungtong-radish showed the lowest value at 6.10±0.01. In the electronic tongue, sourness was high in the Seoho-radish (8.2), and saltiness was high in the Matdong-radish (8.1). Umami was high in the Seoho-radish (8.3), and sweetness was high in the Matdong-radish (8.1). In the electronic nose, sulfur-containing compounds were high in all the samples. Methanethiol, which represented the odor description of cabbage, garlic, and sulfurous, was abundant in sulfur-containing compounds. Multivariate analysis using physicochemical and chemosensory properties can be used as a database for the food industry.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.39 no.2
• /
• pp.1-14
• /
• 2021

Ssangsanjae was created in the mid-1800s, It is located at Jiri Mountain to the north and the Seomjin River to the south. This garden has not changed much even though it has passed through the sixth generation since its creation, so it still retains the features of a private garden in the late Joseon Dynasty. This study focused on the changing landscape of Ssangsanjae as a historical garden; through field surveys, interviews and analysis of builder's collection, boards and couplets. Ssangsanjae is largely classified into inner and outer gardens, and the inner is divided into an entry space, a residential space, and a backyard. The backyard consists of Seodangchae, it's garden, Gyeongamdang, and swimming pool, and is connected to the Sado Reservoir area, which is the outer garden. The distinct vegetation landscape of Ssangsanjae are a 13,000m² bamboo and green tea field, Peony(Paeonia suffruticosa Andr. and Paeonia lactiflora var. trichocarpa(Bunge) Stern) planted on both sides of the road that crosses the lawn, the view through a frame(額景) shown by the twisted branches of Camellia and Evergreen spindletree, and a fence made of Trifolia Orange(Poncirus trifoliata) and Bamboo. Ssangsanjae stands out for its spatial composition and arrangement in consideration of the topography and native vegetation. The main building was named by the descendants based on the predecessor's Aho(pseudonym), and it is the philosophical view of the predecessors who tried to cultivate the younger students without going up on the road. The standing stone and white boundary stone built by Mr. Oh Ju Seok are Ssangsanjae's unique gardening facilities. The stone chairs, and swimming pool which were created by the current owner for the convenience of families and visitors also make a distinctive landscape. Ssangsanjae, for residents, was a place for living, exchanging friendships, training himself and seculusion, for children was a place for learning, but now is 'the private garden' where many people can heal themselves. Over the 200 years, the landscape of Ssangsanjae's inner and outer gardens experienced large and small changes. As such, it is necessary to recognize the historical gardens with changing properties as a living heritage. This study is significant in that, as the first study to approach Ssangsanjae in the view of landscape research, it provides basic data on Ssangsanjae as a destination of garden tourism.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.3
• /
• pp.271-280
• /
• 2021

Purpose. The aim of this study was to evaluate the relationship between the patient's occlusion and a cracked tooth by using T-scan occlusal analysis and a quantitative light-induced fluorescence (QLF) technology. Materials and methods. This study was carried out on 51 patients having cracked teeth between January, 2019 and December, 2020. The tooth crack was determined with a Q-ray pen and QLF parameters (ΔF_max and ΔR_max) were obtained by a Q-ray software. T-scan tests were conducted to all subjects and then, the occlusal force and disclosing time were analyzed. Mann-Whitney U test was performed to compare the occlusal force and disclosing time between cracked teeth groups and contra-lateral normal teeth groups (α = .05). Mann-Whitney U test was performed to compare ΔF_max and ΔR_max according to the results of cold/bite tests (α = .05). A Spearman correlation analysis was run to determine the relationship between ΔF_max or ΔR_max and occlusal force or disclosing time (α=.05). Results. The mean occlusal force and disclosing time were significantly higher on cracked teeth than on normal teeth (P < .05). The ΔF_max or ΔR_max were not significantly different according to the results of cold/bite tests (P > .05). There was no correlation between ΔF_max or ΔR_max and occlusal force or disclosing time (P > .05). Conclusion. There was a significant relationship between occlusion and cracked tooth syndrome. QLF has the potential to be a valuable tool for the diagnosis of tooth crack in clinical practice.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.387-393
• /
• 2021

In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.

• Korea Science and Art Forum
• /
• v.37 no.4
• /
• pp.205-216
• /
• 2019

Today, there have been more museums with architectural freeform structure. From an academic perspective, that caused a change in the paradigm of the genealogy of architectural forms. Accordingly, it has been required to find whether the freeform architecture influences an exhibition space. Therefore, in order to analyze the correlation between freeform architecture and exhibition space, this study looks into the tendency of actual freeform architecture through case analysis after 2000. An exhibition space of museum serves as a socially, culturally, and locally symbolic icon and has the function of delivering information to viewers through the aesthetic presentation of articles on exhibition. This study is meaningful in the point that it drew the conclusion of the correlation between freeform architecture and exhibition space in order to infer that a freeform exhibition space is more effective at viewers' spatial experience. The method and results of this study are presented as follows: Firstly, literature survey on the concept of the freerform architecture of museum and the classification of architectural forms was conducted and previous studies were analyzed in order to establish criteria. Secondly, a case study was conducted through visits to Singapore, Germany, and the Netherlands in order to look into the current state and characteristics of freeform architecture and exhibition space. In this case, Karel Vollers' architectural freeform criteria were used for analysis. Thirdly, to prove the correlation between freeform architecture and exhibition space, each case was cross-checked on the basis of Karel Vollers' architectural freeform criteria and freeform exhibition classification, and then results were drawn. The study results are presented as follows: Firstly, EX(angle, ortho) of freeform architecture had a significant correlation with the diagonal form of exhibition space. That was proved 92.3% accurately more in the Netherlands and Germany than in Singapore. However, the curve form of exhibition space had a unclear correlation. In Singapore case, the curve form correlation was made through RO, FR, and TW. Secondly, freeform architecture had complex-typed combination with the diagonal and curve forms of exhibition space. In particular, N-02 and G-02 had a combination form, basically EX, and partially various forms so as to induce the complexity of free form. As such, architectural freeform makes it possible to achieve infinite transformation in various combinations. For responses, combinational approaches are required in multilateral ways. Based on this study, it will be planned to analyze the correlation between freeform architecture of museum and exhibition presentation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.2
• /
• pp.27-40
• /
• 2021

This study was carried out for the description of the conflicts on the measurement of the root collar diameter of the landscape trees that are currently being produced, distributed, and planted in S. Korea, and for determination of the standard for root collar diameter measurement. The difference in consciousness of appropriate measurement of root collar diameter among different ages of landscape practitioners was statistically significant at p<0.05 level. It seemed to be due to the difference in the amount of field experiences among different age groups. On "the ambiguity of measuring the root collar diameter' of landscape trees", the consciousness was significantly different at p<0.05 level among job positions. On "Improvement of measurement criteria for landscape trees," it was significantly different at p<0.05 level among job types. This was thought to be due to the disagreement between the client and the contractor. On "prevention of topsoil removal" when excavating landscape trees, the consciousness was significantly different at p<0.001 level among different age groups, and different at p<0.01 level among different occupations, and different at p<0.05 level among different working area. The consciousness on "removing top soil when excavating landscape trees and rooting after transplantation" was not significantly different. The consciousness on the conflict caused by "ambiguity in root collar diameter measurement criteria" was high with an average of 3.85 for job type, occupation, jop position, and work experience. It was higher for landscape contractors than public institutions. The higher job positions and more experiences, the more conflicts. The consciousness on the appropriate position of root collar diameter measurement for landscape trees revealed that measuring at above-ground part (66.5%) was prefered to the underground part (33.0%). During the excavation of landscape trees for transplant, topsoil removal up to average depth of -2cm to -4cm was favored by 84.0%, and the purpose of removing topsoil was recognized as 'to increase the size and unit cost' by 59.7%.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.2
• /
• pp.61-73
• /
• 2021

This study aimed to identify the landscape perception and landscape characteristics of users by utilizing SNS data generated by their experiences. Therefore, how to recognize the main places and scenery appearing on the island, and what are the characteristics of the main scenery were analyzed using online text data and photo data. Text data are text mining and network structural analysis, while photographic data are landscape identification models and color analysis. As a result of the study, First, as a result of frequency analysis of Bakji·Banwol-do topics, we were able to derive keywords for local landscapes such as 'Purple Bridge', 'Doori Village', and location, behavior, and landscape images by analyzing them simultaneously. Second, the network structure analysis showed that the connection between key and undrawn keywords could be more specifically analyzed, indicating that creating landscapes using colors is affecting regional activation. Third, after analyzing the landscape identification model, it was found that artificial elements would be excluded to create preferred landscapes using the main targets of "Purple Bridge" and "Doori Village", and that it would be effective to set a view point of the sea and sky. Fourth, Bakji·Banwol-do were the first islands to be created under the theme of color, and the colors used in artificial facilities were similar to the surrounding environment, and were harmonized with contrasting lighting and saturation values. This study used online data uploaded directly by visitors in the landscape field to identify users' perceptions and objects of the landscape. Furthermore, the use of both text and photographic data to identify landscape recognition and characteristics is significant in that they can specifically identify which landscape and resources they prefer and perceive. In addition, the use of quantitative big data analysis and qualitative landscape identification models in identifying visitors' perceptions of local landscapes will help them understand the landscape more specifically through discussions based on results.

• Publications of The Korean Astronomical Society
• /
• v.36 no.3
• /
• pp.47-63
• /
• 2021

Variability is one of the major characteristics of Active Galactic Nuclei (AGN), and it is used for understanding the energy generation mechanism in the center of AGN and/or related physical phenomena. It it known that there exists a time lag between AGN light curves simultaneously observed at different wavelengths, which can be used as a tool to estimate the size of the area that produce the radiation. In this paper, We present long term near-infrared variability of optically bright type 1 AGN using the Wide-field Infrared Survey Explorer data. From the Milliquas catalogue v6.4, 73 type 1 QSOs/AGN and 140 quasar candidates are selected that are brighter than 18 mag in optical and located within 5 degree around the ecliptic poles. Light curves in the W1 band (3.4 ㎛) and W2 band (4.6 ㎛) during the period of 2010-2019 were constructed for these objects by extracting multi-epoch photometry data from WISE and NEOWISE all sky survey database. Variability was analyzed based on the excess variance and the probability P_var. Applying both criteria, the numbers of variable objects are 19 (i.e., 26%) for confirmed AGN and 12 (i.e., 9%) for AGN candidates. The characteristic time scale of the variability (τ) and the variability amplitude (σ) were derived by fitting the DRW model to W1 and W2 light curves. No significant correlation is found between the W1/W2 magnitude and the derived variability parameters. Based on the subsample that are identified in the X-ray source catalog, there exists little correlation between the X-ray luminosity and the variability parameters. We also found four AGN with changing W1-W2 color.