• 말소리와 음성과학
• /
• 제3권3호
• /
• pp.99-108
• /
• 2011

The perturbation parameters like jitter, shimmer, and signal-to-noise ratio (SNR) are largely estimated in the particular segment from the subjective or whole portion of the given pathological voice signal although there are many possible regions to be able to analyze the voice signals. In this paper, the pathological voice signals were classified as type 1, 2, 3, or 4 according to narrow band spectrogram and the value differences of the perturbation parameters extracted in the subjective and entire portion tended to be getting bigger as from type 1 to type 4 signals. Therefore, sample selection method based on moving window to analyze type 2 and 3 signals as well as type 1 signals is proposed. Although type 3 signals cannot be analyzed using the perturbation analysis, the type 3 signals by selecting out the samples in which error count is less than 10 through moving window were analyzed. At present, there is no method to be able to analyze the type 4 signals. Future research will endeavor to determine the best way to evaluate such voices.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.89-92
• /
• 2001

For the diagnosis of arrhythmia in the heart system, the QRS complex of ECG signals is used in many cases. The rejection of the noise in ECG signals is important to acquisition of exact QRS complex. This paper presents some experimental results about instantaneous bandwidth estimation and noise rejection of ECG signals with the purpose of rejection of the 60 Hz power noise and the motion artifacts such as EMG signals and contact noise. ECG signals corrupted by noise are cleaned by using the variable bandwidth filter. For the filtering of ECG signals with noise, the instantaneous bandwidth of the signals is estimated by analysis of time-frequency representation of ECG signal.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.942-944
• /
• 2005

In this study, eddy current signals from various anomalous defects in the heat exchanger tube are predicted af their signal slope characteristics no analyzed. The signal changes due to frequency increase are also observed. Based in the accumulated knowledge, the analysis of superimposed signal is attempted which includes the effects of support plate. Both differential and absolute bobbin probe signals are analyzed. For the prediction of signals, axisymmetric finite element modeling is used and this leads us to the utilization of slope angle analysis of the signal. Results show that differential signals are useful to locate the position of defect under the support plate and absolute signals no easy to predict and analyze even though they no superimposed signals. Combined use of these two types of signals will accomplish a reliable inspection.

• 제어로봇시스템학회논문지
• /
• 제13권9호
• /
• pp.838-842
• /
• 2007

A brain-computer interface(BCI) system is a communication channel which transforms a subject's thought process into command signals to control various devices. These systems use electroencephalographic signals or the neuronal activity of many single neurons. The presented study deals with an efficient analysis method of neuronal signals from a BCI System using an independent component analysis(ICA) algorithm. The BCI system was implemented to generate event signals coding movement information of the subject. To apply the ICA algorithm, we obtained the perievent histograms of neuronal signals recorded from prefrontal cortex(PFC) region during target-to-goal(TG) task trials in the BCI system. The neuronal signals were then smoothed over 5ms intervals by low-pass filtering. The matrix of smoothed signals was then rearranged such that each signal was represented as a column and each bin as a row. Each column was also normalized to have a unit variance. As a result, we verified that different patterns of the neuronal signals are dependent on the target position and predefined event signals.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권7호
• /
• pp.3431-3445
• /
• 2017

Due to the advantages of low transmit power consumption, high spectral efficiency and extended system coverage, Device-to-Device (D2D) communication has drawn explosive attention in wireless communication field. Considering that intra-cell interference caused between cellular signals and D2D signals, in this paper, a network coding-based D2D relay cooperative transmission algorithm is proposed. Under D2D single-hop relay transmission mode, cellular interfering signals can be regarded as useful signals to code with D2D signals at D2D relay node. Using cellular interfering signals and network coded signals, D2D receiver restores the D2D signals to achieve the effect of interference suppression. Theoretical analysis shows that, compared with Amplify-and-forward (AF) mode and Decode-and-forward (DF) mode, the proposed algorithm can dramatically increase the link achievable rate. Furthermore, simulation experiment verifies that by employing the proposed algorithm, the interference signals in D2D communication can be eliminated effectively, and meanwhile the symbol error rate (SER) performance can be improved.

• 한국게임학회 논문지
• /
• 제17권4호
• /
• pp.117-128
• /
• 2017

본 연구는 모바일 게임 플랫폼에서 게임 품질에 대한 정보의 비대칭을 해결하기 위해 게임이용자들이 사용하는 시그널에 대한 질적 연구이다. 시그널 이론을 바탕으로 인터넷 문화기술지 방법을 이용하여 데이터를 수집하였다. 연구결과로 시그널 유형에는 플랫폼 기반의 소비자 참여도가 높은 시그널, 플랫폼 기반의 소비자 참여도가 낮은 시그널, 게임회사 기반의 소비자 참여도가 높은 시그널, 게임회사 기반의 소비자 참여도가 낮은 시그널이 있다. 시그널을 이용한 게임 이용자들의 의사결정의 특징은 첫째, 순위와 다운로드 수는 게임이용자들의 판단의 기준이 되며 둘째, 게임 마케팅 플랫폼은 또 하나의 시그널이 될 수 있으며 마지막으로 게임이용자가 선호하는 시그널은 게임이용 목적이나 행태에 따라 다르다는 것이다.

• 한국통신학회논문지
• /
• 제38A권10호
• /
• pp.845-849
• /
• 2013

본 논문에서는 Galileo 시스템에 사용할 이진 옵셋 반송파 (binary offset carrier: BOC) 신호의 자기상관함수가 갖는 주변 첨두를 제거하기 위해 국소신호를 설계한다. 구체적으로는 BOC 신호를 분석하여 기존 기법의 국소신호가 사인 혹은 코사인 위상의 BOC 신호에만 적용되는 것을 밝히고, 사인과 코사인 위상 BOC 신호에 모두 적용 가능한 국소신호를 설계한다. 이후 설계한 국소신호와 수신 BOC 신호를 상관하고 상관한 부상관함수를 조합함으로써 주변 첨두가 제거된 상관함수를 생성한다. 모의실험을 통해 설계한 국소신호를 이용하여 생성한 상관함수는 주변 첨두가 모두 제거될 뿐만 아니라 설계한 국소신호는 사인과 코사인 위상 BOC 신호에 모두 적용되는 것을 확인한다.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권4호
• /
• pp.319-325
• /
• 2020

In order to propose new satellite navigation signals, it is essential to analyze the increased level of interference effect that the existing signals suffer. In this paper, a method for estimating the power density of the interference signals on GPS signals is proposed before and after the additional transmission of the KPS signals in the L1, L2 and L5 bands. For estimation, we assume the number of visible satellites observed over the Korean peninsular and the minimum received power of the satellite navigation signals. The comparison of the estimated values shows that the power density of the interfering signal increases by up to 1.37 dB due to the introduction of KPS, but this leads to an increase in interference plus noise power density below 0.47 dB.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권9호
• /
• pp.3194-3210
• /
• 2022

Wall obstruction is the main factor leading to the non-line of sight (NLoS) error of indoor localization based on received signal strength indicator (RSSI). Modeling and correcting the path loss of the signals through the wall will improve the accuracy of RSSI localization. Based on electromagnetic wave propagation theory, the reflection and transmission process of wireless signals propagation through the wall is analyzed. The path loss of signals through wall is deduced based on power loss and RSSI definition, and the theoretical model of path loss of signals through wall is proposed. In view of electromagnetic characteristic parameters of the theoretical model usually cannot be accurately obtained, the statistical model of NLoS error caused by the signals through the wall is presented based on the log-distance path loss model to solve the parameters. Combining the statistical model and theoretical model, a hybrid model of path loss of signals through wall is proposed. Based on the empirical values of electromagnetic characteristic parameters of the concrete wall, the effect of each electromagnetic characteristic parameters on path loss is analyzed, and the theoretical model of regional path loss of signals through the wall is established. The statistical model and hybrid model of regional path loss of signals through wall are established by RSSI observation experiments, respectively. The hybrid model can solve the problem of path loss when the material of wall is unknown. The results show that the hybrid model can better express the actual trend of the regional path loss and maintain the pass loss continuity of adjacent areas. The validity of the hybrid model is verified by inverse computation of the RSSI of the extended region, and the calculated RSSI is basically consistent with the measured RSSI. The hybrid model can be used to forecast regional path loss of signals through the wall.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.151-154
• /
• 1998

The interference evaluation methods and criteria between the analogue TV/FM signals for BSS(Broadcasting Satellite Service) plans and the associated feeder link plans were established in WARC(World Administrative Radio Conference)-77 and 88. However, it should be applied the different interference evaluation methods and criteria of the digital TV signals from those of the analogue TV/FM signals. In this paper, the interference evaluation methods and criteria between the digital TV signals and the analogue TV/FM signals were analyzed. And also, the effects of the interference from the digital signals for Koreasat-1 into the analogue TV/FM signals for Japanese broadcasting satellite were evaluated. The amounts of EIRP reduction in the transmitting space stations were calculated to meet the interference criteria. The results showed that the digital BSS networks including Koreasat-1 would share the limited resources with the analogue BSS networks.