• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.9
• /
• pp.55-65
• /
• 2004

ATM was recommended by the ITU and ATM Forum as a means of transportation for B-ISDN. At this time, due to the comprehensive mature of ATM protocol, ATM has been adapted as the backbone system for carrying Internet traffi $c^{[1,2,3,4]}$. But major conceptsregarding the ATN protocol will be used on future technology. This paper presents preventive congestion control mechanisms for detecting HTR(Hard-To Reach) code in ATM systems, in particular for an improved HTR call registration method using network signaling information will discussed. In high speed circuit switching system environments, a fast HTR control mechanism is necessary. We present research results for improving HTR call registration and control methods using network signaling information and fuzzy control mechanisms. We concluded that it showed fast congestion avoidance mechanisms with a fewer system load maximized the efficiency of network resources by restricting ineffective machine attempts.

• Journal of Korea Multimedia Society
• /
• v.10 no.4
• /
• pp.462-469
• /
• 2007

ATM protocol has the techniques such as cell discarding priority, traffic shaping and traffic policing. ATM based MPLS(Multiprotocol Label Switching) is discussed for its provisioning QoS commitment capabilities, traffic engineering and smooth migration for BcN using conventional ATM infra in Korea. This paper proposes preventive congestion control mechanism for detecting HTR(Hard To Reach) LSP(Label Switched Path) in ATM based MPLS systems. In particular, we decide HTR LSP using real time signaling information(etc., PTI,AIS/RDI) for applying HTR concept in circuit switching to ATM based MPLS systems and use those session gap and percentage based control algorithm that were used in conventional PSTN call controls. We concluded that it maximized the efficiency of network resources by restricting ineffective machine attempts. Proposed control can handle 208% call processing and more than 147% success call, than those without control. It can handle 187% BHCA(Busy Hour Call Attempts) with 100 times less than use of exchange memory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.241-249
• /
• 2005

ATM based MPLS(Multiprotocol Label Switching) is discussed for its provisioning QOS commitment capabilities, Traffic engineering and smooth migration for BcN in Korea. At this time, due to the comprehensive nature of ATM protocol, ATM has been adapted as the backbone system for carrying Internet traffic[1,2,3,4]. This paper presents preventive congestion control mechanisms for detecting HTR(Hard-To-Reach) LSP(Label Switched Path) in ATM based MPLS systems. In particular, we have introduced a HTR LSP detection method using network signaling information in an ATM layer. MPLS related studies can cover LSP failures in a physical layer fault, it can not impact network congestion status. Here we will present the research results for introducing HTR LSP detection methods and control mechanisms and this mechanism can be implementing as SOC for high speed processing a packet header. We concluded that it showed faster congestion avoidance abilities with a more reduced system load and maximized the efficiency of network resources by restricting ineffective machine attempts.

• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.270-281
• /
• 2003

ETF made the RFCs of MPLS technologies for providing the QoS of ATM or Frame Relay and the flexibility&scalability of IP on the Internet services. IETF has been expanding MPLS technologies as a common control component for supporting the various switching technologies called GMPLS. Also, IETF has standardized the signaling protocols based on such technologies, such as LDP, CR-LDP and RSVP-TE. ETRI developed the MPLS system based on ATM switch in order to provide more reliable services, differentiated services and value-added services like the VPN and traffic engineering service on the Korea Public Sector network. We are planning on deploying model services and commercial services on that network. This paper explains the basic functions of LDP, design and development of LDP on our system, and compares with LDP development and operation on other MPLS systems made by Cisco, Juniper, Nortel and Riverstone. In conclusion, this paper deduces the future services and applications by LDP through these explanation and comparison.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.3
• /
• pp.1-11
• /
• 1997

Since the radio spectrum is limited, future wireless system will have micro cellular architecture in order to provide multimedia traffic services on personal communicatons network. The small coverage area of micro cellular systems results in frequent hadnoffs and location updates. We focuse on network load and terminal power due to frequent location updates and propose a location tracking scheme using embedded-pager PCS terminals. The proposed scheme is expected to minimize theconsumption of PCS terminal powr and improve the receiving rate of callee because of the power saving mechanism and the embedded-pager PCS terminal. This paper proposes signaling flows among the network elements for the proposed location tracking scheme. The signaling flows are accomodated to not only the existed network architectures but alsothe ATM backbone network arcitecture. To verify the signaling flows, we used petri-Net model. The resutls show that the signaling flows are suitable to our proposed location tracking scheme.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.12
• /
• pp.1529-1538
• /
• 1999

광대역 액세스 망은 B-ISDN 환경에서 다양한 유형의 가입자들을 서비스 노드로 집선하는 기능을 수행한다. ITU-T의 SG13에서는 광대역 액세스 망과 서비스 노드 사이에서 ATM 자원의 동적인 할당 및 해제를 위하여 연결 제어 프로토콜의 표준화를 수행하고 있다. ATM 연결의 설정을 위한 연결 제어 프로토콜과 신호 프로토콜의 연동 기능은 서비스 노드에서 수행되며, ITU-T에서는 순차적 연동 모델을 채택하고 있다. 순차적 연동 모델은 SN에서 각 프로토콜의 절차가 순차적 방식으로 연동되므로 연결 지연이 크다. 본 논문에서는 광대역 액세스 망의 도입으로 인한 연결 설정 지연을 최소화하기 위하여 병렬형으로 수행되는 연동 모델을 제시하였다. 그리고 본 논문에서 제안한 병렬형 연동 모델의 성능 분석을 통하여 순차적 연동 모델과의 연결 설정 지연 및 완료비에 대한 비교, 분석을 수행하였다. 성능 분석에서 사용된 워크로드 파라미터는 RACE MAGIC 프로젝트의 결과를 적용하였다. Abstract In B-ISDN environment, various subscribers are concentrated into a service node via a broadband access network. The SG13 of ITU-T is standardizing a connection control protocol which provides dynamic allocation of ATM resources between an access network and a service node. To establish an ATM connection, interworking functions between the connection control protocol and the signaling protocol are performed at the service node. ITU-T adopts the sequential interworking model. In this paper, we propose the parallel interworking model which minimizes the overall connection setup delay by introducing the access network. Using the performance analysis, we compare our proposed parallel model with the existing sequential model in terms of connection setup delay and completion ratio. The workload parameters of RACE MAGIC project are applied to the analysis and simulation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.2
• /
• pp.22-31
• /
• 2000

The VB5.2 interface of B-lSDN, that is located between an access network and a service node, allows dynamic allocation and release of ATM resources. In this paper, we propose the B-ANCC protocol of the VB5.2 interface to minimize the overall connection setup delay by introducing the access network. The B-ANCC protocol enhances the B-BCC protocol and adopts a parallel interworking function with signaling protocols in the service node. To confirm the correctness of the proposed B-ANCC protocol, we validate it using the automated validation tool, SPIN. We analyze and simulate the sequential interworking model based on the B-BCC protocol and the parallel interworking model based on the B-ANCC protocol, in terms of a connection setup delay and a completion ratio. It is shown that our proposed parallel interworking model with B-ANCC reduces a setup delay and improves a completion ratio compared to the sequential interworking model with B-BCC.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.11
• /
• pp.1414-1428
• /
• 1999

ATM/B-ISDN 신호 프로토콜과 같은 통신 프로토콜의 상호운용성을 시험하기 위한 시험경우를 생성하는 알고리즘이 제안되었다 1]. 현재까지 상호운용성 시험경우 도출을 자동화하거나 이에 대한 커버리지를 분석한 경우는 없다. 본 논문은 1]에서 제안한 알고리즘을 프로그램으로 구현하여 TCP 연결설정 프로토콜에 적용하고 결과를 분석한다. 이 과정에서 (1) TCP 연결설정 프로토콜의 3방향 핸드 쉐이킹 부분을 다루지 못했던 기존의 알고리즘을 개선하고, (2) 개선된 알고리즘을 프로그램으로 구현하여 TCP 연결설정 프로토콜의 상호운용성 시험경우를 도출하고, (3) 생성된 상호운용성 시험경우를 트랜지션 커버리지 관점에서 분석하고, (4) 향상된 트랜지션 커버리지를 얻기 위하여 알고리즘 확장 방안을 제시한다.Abstract A test derivation method suitable for testing interoperability for the class of communication protocols like the ATM/B-ISDN signaling protocol was proposed 1]. Up to now, there is no work on automating derivation of the interoperability test suite and analyzing its coverage. In this paper, we implement the algorithm proposed by 1], apply it to the Transmission Control Protocol (TCP), and analyze its results. In this process, we (1) improve the algorithm that is not applicable to the TCPs three-way handshaking, (2) implement the improved algorithm as a program and derive an interoperability test suite automatically from a given pair of TCP FSMs, (3) analyze generated interoperability test suite in view of transition coverage, and (4) present a method in order to extend the algorithm for better transition coverage.