• 제목/요약/키워드: signaling information in ATM systems

검색결과 8건 처리시간 0.019초

ATM시스템에서 네트웨크 시그날링 정보를 이용한 HTR(Hard-To-Reach) 등록방법 및 퍼지제어 방법 (HTR(Hard-To-Reach) Code Registration methods and Fuzzy controls using network signaling information in ATM systems)

  • Chul Soo, Kim;Jung tae, Lee
    • 대한전자공학회논문지TC
    • /
    • 제41권9호
    • /
    • pp.55-65
    • /
    • 2004
  • ATM기술은 ITU나 ATM Forum과 같은 표준화 기관에서 B-ISDN서비스를 전송하기 위한 기술로 표준화 되어 왔다. 현재는 ATM기술이 복잡하여 인터넷 트래픽을 전송하도록 MPLS와 같은 백본기술로 채택되고 있다. 그러나 ATM프로토콜은 BcN망등에서 많이 채택될 것이다. 본 논문은 ATM기반 시스템에서 네트워크의 정보를 이용하여 HTR코드를 기법을 적용하여, 코드를 검출하고, 등록하는 기법에 대해 논하고 자 한다. 고속의 circuit switching시스템에서 HTR코드 제어는 필수적이며, 본 논문에서는 HTR코드검출 및 Fuzzy제어방식을 통해 실험결과를 보인다. 본 방법에 의해 제시된 실험결과는 체증상태를 신속히 제어하며 시스템 자원을 최대한 활용하고, 적은 부하로서도 효율적으로 제어함을 보인다.

ATM 기반 MPLS 망에서 실시간 신호정보를 이용한 체증 제어 기법 (Congestion Control Mechanism using Real Time Signaling Information in ATM based MPLS Network)

  • 안귀임
    • 한국멀티미디어학회논문지
    • /
    • 제10권4호
    • /
    • pp.462-469
    • /
    • 2007
  • ATM 프로토콜은 셀 폐기 우선순위, 트랙픽 Shaping, Policing 기능 등을 가지고 있다. ATM 기반 MPLS 망이 QoS 보장능력과 트래픽 엔지니어링 측면에서 이점이 있기 때문에 주목을 받고 있고 우리나라의 경우에 기존 ATM 인프라를 이용하여 BcN망으로서 점진적인 진화를 시도하고 있다. 특히, 본 논문의 회선교환에서 적용되었던 HTR 개념을 ATM 기반 MPLS 망에 확장 적용하기 위해 실시간 신호정보(PTI,AIS/RDI)를 이용하여 HTR LSP를 결정하고 있으며, PSTN에서 사용되는 체증제어 기법인 세션갭 알고리즘과 백분율제어 알고리즘을 적용하여 호를 제어하고 있다. 제안된 메카니즘은 기계의 비효율적인 시도를 제한함으로서 망자원들의 효율성을 최대화하였다. 실험결과, 208%정도 호 처리를 더 할 수 있었으며, 147% 정도의 호 성공률을 보였으며, 교환기 메모리도 100배 저도 절약하였으며, BHCA도 187% 더 처리할 수 있었다.

  • PDF

LSP Congestion Control methods in ATM based MPLS on BcN

  • Kim Chul soo;Park Na jung;Ahn Gwi im;Lee Jung tae
    • 한국통신학회논문지
    • /
    • 제30권4A호
    • /
    • pp.241-249
    • /
    • 2005
  • ATM based MPLS(Multiprotocol Label Switching) is discussed for its provisioning QOS commitment capabilities, Traffic engineering and smooth migration for BcN in Korea. At this time, due to the comprehensive nature of ATM protocol, ATM has been adapted as the backbone system for carrying Internet traffic[1,2,3,4]. This paper presents preventive congestion control mechanisms for detecting HTR(Hard-To-Reach) LSP(Label Switched Path) in ATM based MPLS systems. In particular, we have introduced a HTR LSP detection method using network signaling information in an ATM layer. MPLS related studies can cover LSP failures in a physical layer fault, it can not impact network congestion status. Here we will present the research results for introducing HTR LSP detection methods and control mechanisms and this mechanism can be implementing as SOC for high speed processing a packet header. We concluded that it showed faster congestion avoidance abilities with a more reduced system load and maximized the efficiency of network resources by restricting ineffective machine attempts.

MPLS시스템에서 LDP 기능 구현 및 활용 방안 (On Implementing and Deploying Label Distribution Protocol in MultiProtocal Label Switching Systems)

  • 김미희;이종협;이유경
    • 한국정보과학회논문지:정보통신
    • /
    • 제30권2호
    • /
    • pp.270-281
    • /
    • 2003
  • 인터넷 서비스에 ATM(Asynchronous Transfer Mode)이나 프레임 릴레이의 QoS(Quality of Service)를 제공하면서 IP(Internet Protocol)의 유연성과 확장성을 제공하기 위하여 IETF에서는 MPLS(Multiprotocol Label Switching) 기술을 표준화하였고, 이러한 기술을 확장하여 다양한 스위칭 기술들을 지원하는 제어 콤포넌트로서 GMPLS(Generalized MPLS)라는 이름으로 확장 표준화 진행중이다. 또한 이러한 기술 제공의 기본이 되는 시그널링 프로토콜로 LDP(Label Distribution Protocol), CR-LDP(Constraint based Routing LDP), RSVP-TE(Resource Reservation Protocol-Traffic Engineering)의 표준화를 진행해왔다. 이에 한국전자통신연구원(ETRI)에서는 현재의 초고속 국가망에 보다 안정적이고 차별화된 서비스 제공과 가상 망(VPN, Virtual Private Network) 서비스나 트래픽 엔지니어링(TE, Traffic Engineering) 서비스 와 같은 고부가가치 서비스를 제공하기 위하여 이러한 MPLS 기술을 적용한 ATM 기반 MPLS 시스템을 개발하였고, 이제 초고속 국가망의 시범 서비스와 상용화 서비스 제공을 앞두고 있다. 본 논문에서는 LDP의 기능 개요와 개발된 시스템에 적용된 LDP 기능에 관하여 설계 및 구현 내용을 설명하고, 노텔, 시스코, 주니퍼, 리버 스톤에서 개발한 MPLS 시스템에서의 LDP 개발 내용과 운용 방법을 비교 설명하고자 한다. 이를 통하여 LDP 기능이 추후 망에 적용되어 제공 가능할 서비스와 활용 방안에 관하여 기술하고자 한다.

Pager 내장형 PCS 단말기를 이용한 location tracking 기법 (A location tracking scheme using embedded-pager PCS terminals)

  • 장경훈;심재정;박정식;김덕진
    • 전자공학회논문지S
    • /
    • 제34S권3호
    • /
    • pp.1-11
    • /
    • 1997
  • Since the radio spectrum is limited, future wireless system will have micro cellular architecture in order to provide multimedia traffic services on personal communicatons network. The small coverage area of micro cellular systems results in frequent hadnoffs and location updates. We focuse on network load and terminal power due to frequent location updates and propose a location tracking scheme using embedded-pager PCS terminals. The proposed scheme is expected to minimize theconsumption of PCS terminal powr and improve the receiving rate of callee because of the power saving mechanism and the embedded-pager PCS terminal. This paper proposes signaling flows among the network elements for the proposed location tracking scheme. The signaling flows are accomodated to not only the existed network architectures but alsothe ATM backbone network arcitecture. To verify the signaling flows, we used petri-Net model. The resutls show that the signaling flows are suitable to our proposed location tracking scheme.

  • PDF

광대역 액세스 망을 위한 연결 제어 프로토콜의 병렬형 연동 모델과 성능 분석 (Parallel Interworking Model and Performance Analysis of a Connection Control Protocol for Broadband Access Network)

  • 김춘희;차영욱;김재근;한기준
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제26권12호
    • /
    • pp.1529-1538
    • /
    • 1999
  • 광대역 액세스 망은 B-ISDN 환경에서 다양한 유형의 가입자들을 서비스 노드로 집선하는 기능을 수행한다. ITU-T의 SG13에서는 광대역 액세스 망과 서비스 노드 사이에서 ATM 자원의 동적인 할당 및 해제를 위하여 연결 제어 프로토콜의 표준화를 수행하고 있다. ATM 연결의 설정을 위한 연결 제어 프로토콜과 신호 프로토콜의 연동 기능은 서비스 노드에서 수행되며, ITU-T에서는 순차적 연동 모델을 채택하고 있다. 순차적 연동 모델은 SN에서 각 프로토콜의 절차가 순차적 방식으로 연동되므로 연결 지연이 크다. 본 논문에서는 광대역 액세스 망의 도입으로 인한 연결 설정 지연을 최소화하기 위하여 병렬형으로 수행되는 연동 모델을 제시하였다. 그리고 본 논문에서 제안한 병렬형 연동 모델의 성능 분석을 통하여 순차적 연동 모델과의 연결 설정 지연 및 완료비에 대한 비교, 분석을 수행하였다. 성능 분석에서 사용된 워크로드 파라미터는 RACE MAGIC 프로젝트의 결과를 적용하였다. Abstract In B-ISDN environment, various subscribers are concentrated into a service node via a broadband access network. The SG13 of ITU-T is standardizing a connection control protocol which provides dynamic allocation of ATM resources between an access network and a service node. To establish an ATM connection, interworking functions between the connection control protocol and the signaling protocol are performed at the service node. ITU-T adopts the sequential interworking model. In this paper, we propose the parallel interworking model which minimizes the overall connection setup delay by introducing the access network. Using the performance analysis, we compare our proposed parallel model with the existing sequential model in terms of connection setup delay and completion ratio. The workload parameters of RACE MAGIC project are applied to the analysis and simulation.

VB5.2 인터페이스를 위한 연결 제어 프로토콜과 병렬형 연동 모델 (Connection Control Protocol and Parallel Interworking Model for the VB5.2 Interface)

  • 차영욱;김춘희;한기준
    • 한국산업정보학회논문지
    • /
    • 제5권2호
    • /
    • pp.22-31
    • /
    • 2000
  • B-ISDN 환경의 VB5.2 인터페이스는 B-BCC 프로토콜을 이용하여 액세스 망과 서비스 노드 사이에서 ATM 자원의 동적인 할당 및 해제 기능을 제공한다. 본 논문에서는 액세스 망의 도입으로 인한 연결 선정 지연을 향상시키기 위하여 VB5.2 인터페이스의 B-BCC 프로토콜을 개선시킨 B-ANCC 프로토콜과 서비스 노드에서 VS5.2 인터페이스의 연결 제어 프로토콜이 신호 프로토콜과 병렬형으로 연동하는 모델을 제안하였다. 본 논문에서 제안한 B-ANCC 프로토콜의 정확성을 확인하기 위하여 자동 도구인 SPIN을 이용하여 검증하였으며, 큐잉 모델 분석과 시뮬레이션을 통하여 B-BCC 프로토콜 기반의 순차형 연동 모델과 B-ANCC 프로토콜 기반 병렬형 연동 모델의 연결 설정 지연 및 완료비에 대한 비교, 분석을 수행하였다. 분석 결과 VB5.2 인터페이스의 연결 제어 프로토콜로 B-BCC 대신 B-ANCC를 사용하고 병렬형 연동 방식을 사용함으로써, 연결 설정 지연과 완료비 모두를 향상시킬 수 있음을 알 수 있었다.

  • PDF

TCP 상호운용성 시험스위트의 도출 (Interoperability Test Suite DErivation for the TCP)

  • 설순옥;김명철;강성원;진병문;현순
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제26권11호
    • /
    • pp.1414-1428
    • /
    • 1999
  • ATM/B-ISDN 신호 프로토콜과 같은 통신 프로토콜의 상호운용성을 시험하기 위한 시험경우를 생성하는 알고리즘이 제안되었다 1]. 현재까지 상호운용성 시험경우 도출을 자동화하거나 이에 대한 커버리지를 분석한 경우는 없다. 본 논문은 1]에서 제안한 알고리즘을 프로그램으로 구현하여 TCP 연결설정 프로토콜에 적용하고 결과를 분석한다. 이 과정에서 (1) TCP 연결설정 프로토콜의 3방향 핸드 쉐이킹 부분을 다루지 못했던 기존의 알고리즘을 개선하고, (2) 개선된 알고리즘을 프로그램으로 구현하여 TCP 연결설정 프로토콜의 상호운용성 시험경우를 도출하고, (3) 생성된 상호운용성 시험경우를 트랜지션 커버리지 관점에서 분석하고, (4) 향상된 트랜지션 커버리지를 얻기 위하여 알고리즘 확장 방안을 제시한다.Abstract A test derivation method suitable for testing interoperability for the class of communication protocols like the ATM/B-ISDN signaling protocol was proposed 1]. Up to now, there is no work on automating derivation of the interoperability test suite and analyzing its coverage. In this paper, we implement the algorithm proposed by 1], apply it to the Transmission Control Protocol (TCP), and analyze its results. In this process, we (1) improve the algorithm that is not applicable to the TCPs three-way handshaking, (2) implement the improved algorithm as a program and derive an interoperability test suite automatically from a given pair of TCP FSMs, (3) analyze generated interoperability test suite in view of transition coverage, and (4) present a method in order to extend the algorithm for better transition coverage.