• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.12
• /
• pp.1122-1129
• /
• 2015

This paper suggests a method of detecting traffic lights for vehicles by combining the HSV(hue saturation value) color model, morphometric characteristics, and location information appearing on consecutive images in daytime. In order to detect the traffic light, the color corresponding to the signal lights should be explored. It is difficult to detect traffic lights among colors of lights from buildings, taillight of cars, leaves, placards, etc. The proposed algorithm searches for the traffic lights from many candidates using morphometric characteristics and location information in consecutive images. The recognition process is divided into three steps. The first step is to detect candidates after converting RGB channel into HSV color model. The second step is to extract the boundaries between the housing of traffic lights and background by exploiting the assumption that the housing has lower brightness than the surrounding background. The last step is to recognize the signal light after eliminating the false candidates using morphometric characteristics and location information appearing on consecutive images. This paper demonstrates successful detection results of traffic lights from various images captured on the city roads.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.171-174
• /
• 2004

Concerning Korean energy consumption, 20% of the total electrical energy (96% is now exported) is consumed in lighting area. Accordingly, it is one of the most important governmental policies to efficiently utilize electricity due to development and application of high-efficiency lighting equipment. In Korea, widely-built traffic signals employ an incandescent and are of 100W/300 mm, and 280,080set/801,932lamps have been installed and operated by 1999. Of them, 58%(161,181set), 25%(69,655set) and 18%(49,244set) correspond to traffic signals, pedestrian signals and other supplementary signals respectively. It was estimated that electrical energy consumed 28MW instantaneously, 245GWH annually. On the other hand, the LED traffic signal is expected to be a future traffic signal since if traffic signals are replaced by LEDs, energy saving effect of 85% and drop of 75% in maintenance fee will be obtained. In this paper, the performance and characteristics of many LED traffic signals made in Korea are summarized in order to reform Korean standard of LED traffic signals.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.673-674
• /
• 2023

도로교통의 안전 확보와 사고 예방을 목적으로 운전자나 보행자에게 필요한 정보를 제공하기 위해 경찰청에서 규격 또는 지침으로 제정하여 노변에 설치되는 교통안전시설 장치는 교통신호정보를 받기 위한 통신선과 함께 장치 구동을 위한 전원선을 개별로 시공해야 하기에 시공 비용의 절감과 함께 다종·다형의 장치에 대하여 통합적인 관제, 확장성, 유연성에 대응할 필요성이 제기되고 있다. 이에 본 논문에서는 이더넷 통신을 기반으로 전원 공급이 하나의 케이블로 가능한 이더넷 전원장치(PoE) 기술과 IoT 프로토콜인 MQTT를 이용하여 다종·다형의 교통안전시설 장치를 통합관제하고, 확장성과 유연성을 가지는 교통안전시설 장치 통합 시스템을 제안한다.

• Journal of Advanced Navigation Technology
• /
• v.21 no.5
• /
• pp.491-500
• /
• 2017

This paper investigates a low cost dual modular redundancy system based on heartbeat which can be applied to traffic control signal system. Failure of the traffic control signal system can cause traffic confusion and traffic accidents. Therefore safety and reliability of traffic control should be secured using fault tolerance technology. To do this, we configured a redundant board using the open source hardware and the heartbeat technique of Linux HA. The function of the traffic signal control system was verified and the fault recovery time was measured using fault injection test. As a result of the test, the fault recovery time was confirmed to be less than 9 seconds on average, confirming that the reliability target time is satisfied. Based on the results of this study, it is expected that it can be applied to fields requiring high reliability systems such as aviation, space, and nuclear power embedded systems.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.413-421
• /
• 2018

We propose a novel methodology based on the multiplication function to improve the signal-to-noise ratio (SNR) for vibration detection in a phi optical time-domain reflectometer system (phi-OTDR). The extreme-mean complementary empirical mode decomposition (ECEMD) is designed to break down the original signal into a set of inherent mode functions (IMFs). The multiplication function in terms of selected IMFs is used to determine a vibration's position. By this method, the SNR of a phi-OTDR system is enhanced by several orders of magnitude. Simulations and experiments applying the method to real data prove the validity of the proposed approach.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.12-19
• /
• 2014

A signal plan focused on vehicle traffic could easily overlook vulnerable priority signals, although the importance of vulnerable movements is increasingly recognized in recent years. Especially, the vulnerable are sometimes faced with dangerous situations when crossing roads with a signal plan based on design values of average, non-vulnerable persons. This study is focused on how to minimize the vehicle delay while simultaneously considering traffic flow and providing traffic safety by increasing road crossing time for pedestrians. For this purpose, a priority signal control strategy for the vulnerable, considering vehicle traffic flow, has been tested. Practical implication and a microscopic computer simulation has shown that the proposed method could provide a small decrease (about 6.2%) in pedestrian delay, a small increase (about 8.5~13.3%) in travel speed of passing traffic, and a considerable decrease (16.2~26.9%) in vehicle travel time. These findings suggest that the proposed signal control strategy could increase pedestrian safety and diminish delay of vehicle travel.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.14-27
• /
• 2020

Pedestrian deaths account for a high percentage of deaths in traffic accidents in Korea, raising interest in pedestrian safety policy. However, since the walk signal time is applied based on the length of the crosswalk without considering the walker and the signal cycle, the walk waiting time is relatively longer than the crosswalk, causing pedestrian jaywalking. In this study, due to an unreasonable signal time plan during a road crossing where a signal is installed, the pedestrian's walk signal was given twice a cycle of crossings, and the operational and safety effects of the signal system were quantitatively and qualitatively analyzed, and the operational effects of the signal interval and jaywalking rate were assessed by different signal intervals. The results showed that jaywalking and waiting time decreased, and the shorter the interval between the application of the walk signal time, the less jaywalking is analyzed. However, there is a risk of vehicle conflict due to pedestrian exposure, and measures for expanding safety for operation were proposed.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.89-100
• /
• 2008

In an urban network controlled by traffic signals, there is an interaction between the signal timing and the routes chosen by individual road users. This study develops a bi level programming model for traffic signal optimization in networks with path based traffic assignment. In the bi level programming model, genetic algorithm approach has been proposed to solve upper level problem for a signalized road network. Path based traffic assignment using column generation technique which is proposed by M.H. Xu, is applied at the lower-level. Genetic Algorithm provieds a feasible set of signal timings within specified lower and upper bounds signal timing variables and feeds into lower level problem. The performance of this model is investigated in numerical experiment in a sample network. In result, optimal signal settings and user equilibrium flows are made.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.27-41
• /
• 2011

This research proposes new tram signal coordination model, called MAXBAND MILP-Tram for a passive tram signal priority strategy. The proposed model was formulated based on the MAXBAND model that was a traditional arterial signal optimization model. The model could calculate the bandwidth solutions for both general-purpose-lane traffic and median-tram-lane traffic. Lower progression speed are applied for the tram traffic considering lower running speed and dwell time at the stations. A phase sequence procedure determines the green times and left-turn phase sequences for tram traffic in median tram lane. To estimate the performance of the MILP-Tram model, the control delay of trams were estimated using the micro simulation model, VISSIM. The analysis results showed 57 percent decrease of the tram compared to the conventional signal timing model. The delay for car, however, increased 18 percent. The sensitivity analysis indicated that the passive tram signal priority strategy using the offset and phase sequence optimization was effective in reducing the person delay under the congested traffic condition.

• Wind and Structures
• /
• v.20 no.3
• /
• pp.405-422
• /
• 2015

In previous model- and full-scale studies, high-amplitude vertical vibrations of mast-arm traffic signal structures have been shown to be due to vortex shedding, a phenomenon in which alternatingly shed, low-pressure vortices induce oscillating forces onto the mast-arm causing a cross-wind response. When the frequency of vortices being shed from the mast-arm corresponds to the natural frequency of the structure, a resonant condition is created causing long-lasting, high-amplitude vibrations which may lead to the fatigue failure of these structures. Turbulence in the approach flow is known to affect the cohesiveness of vortex shedding. Results from this full-scale investigation indicate that the surrounding terrain conditions, which affect the turbulence intensity of the wind, greatly influence the likelihood of occurrence of long-lasting, high-amplitude vibrations and also impact whether reduced service life due to fatigue is likely to be of concern.