• Journal of Sensor Science and Technology
• /
• v.26 no.3
• /
• pp.199-203
• /
• 2017

In this paper, we developed an underwater localization system for underwater robot docking using the electromagnetic wave attenuation model. Electromagnetic waves are generally known to be impossible to use in water environment. However, according to the conclusions of the previous studies on the attenuation characteristics in underwater, the attenuation pattern is uniform and its model was accurately proposed and verified in 3-dimensional space via the omnidirectional antenna. In this paper, a docking structure and localization sensor system are developed for a widely used cone type docking mechanism. First, we fabricated electromagnetic wave range sensor transmit modules. And a mobile sensor node is equipped with unmanned underwater vehicle(UUV)s. The mobile node senses the four different signal strength (RSS: Received Signal Strength) from fixed nodes, and the obtained RSS data are transformed to each distance information using the 3-Dimensional EM wave attenuation model. Then, the relative localization between the docking area and underwater robot can be achieved according to optimization algorithm. Finally, experimental results show the feasibility of the proposed localization system for the docking induction by comparing the errors in the actual position of the mobile node and the theoretical position through the model.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.189-197
• /
• 2012

In this paper, we propose an optimal path search algorithm that applies the received signal strength between a mobile device and a satellite. Because the common path search algorithm is only based on the shortest path search, it is difficult to provide stable multimedia services for the satellite mobile devices. The proposed algorithm provides the stable communication environment for the satellite mobile devices based on received signal strength. In Satellite communications, changes in the radio quality are severe depending on the receiving environment. Therefore, an accurate analysis of the receiving environment characteristics is very important for providing stable multimedia services of satellite communications. The causes of radio attenuation are atmosphere attenuation, vegetation attenuation and buildings attenuation. These factors were applied to analyze the received signal strength. The proposed algorithm can search the optimal path in urban for stable satellite multimedia services.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.193-200
• /
• 2019

The auto-encoder network which is a good candidate to handle the modeling of the signal strength attenuation is designed for denoising and compensating the distortion of the received data. It provides a non-linear mapping function by iteratively learning the encoder and the decoder. The encoder is the non-linear mapping function, and the decoder demands accurate data reconstruction from the representation generated by the encoder. In addition, the adaptive network width which supports the automatic generation of new hidden nodes and pruning of inconsequential nodes is also implemented in the proposed algorithm for increasing the efficiency of the algorithm. Simulation results show that the proposed method can improve the neural network training surface to achieve the highest possible accuracy of the signal modeling compared with the conventional modeling method.

• Journal of Power System Engineering
• /
• v.17 no.4
• /
• pp.72-78
• /
• 2013

Compacted graphite iron 340 was carried out the heat treatment from 873 to 1,273 K. Compacted graphite iron 340 was evaluated relationship between the sound velocity, the attenuation coefficient and the tensile strength. The obtained results are as following. The signal strength of C scan images were weak according to increasing of heat treatment temperature and time. The amplitude of A scan and B scan was also low. This can be cause that the graphite was grown into the type of vermicular, and the many of grain boundary with ultrasound scattering were increase. The sound velocity was depend upon the heat treatment temperature and time, the attenuation coefficient had nothing to do with the temperature and time. The higher the heat treatment temperature, the tensile strength and the sound velocity were decreased. However, the tensile strength was proportional to the sound velocity. The higher tensile strength, the faster the sound velocity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.1
• /
• pp.70-75
• /
• 2015

With the development of communication technologies and smartphone, requirements of positioning accuracy for LBS (Location Based Service) are becoming increasingly important. LBS is a service which offers the information or entertainment based on a location to users. Therefore, positioning is very important for LBS. Among many positioning methods, IEEE 802.11 WLAN positioning measures the distance using the RSSI (Received Signal Strength Indicator) attenuation log model. Thus in order to enhance positioning, we modify the IEEE 802.11 RSSI attenuation log model by adaptive weighting method. In this paper, we propose improved IEEE 802.11 RSSI attenuation log model for enhanced indoor positioning.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.8
• /
• pp.699-705
• /
• 2012

In this paper, an infrastructure-based localization method using underwater wireless sensor network (UWSN) is addressed. A localization using the UWSN is necessary to widen the usage of underwater applications, however it is very difficult to establish the UWSN due to the restrictions of water. In this paper, to extend the usage of UWSN at the infrastructure, we propose a sophisticated UWSN localization method using the Received Signal Strength Indicator (RSSI) of the electromagnetic waves. During the electromagnetic waves propagating in underwater, there arises a lot of attenuation according to the distance, while the attenuation shows uniformity according to the distance. Using this characteristics, the localization system in underwater infrastructure is proposed and the experimental results show the effectiveness.

• The Journal of Korea Robotics Society
• /
• v.11 no.3
• /
• pp.156-162
• /
• 2016

For the underwater localization, acoustic sensor systems are widely used due to greater penetration properties of acoustic signals in underwater environments. On the other hand, the good penetration property causes multipath and interference effects in structured environment too. To overcome this demerit, a localization method using the attenuation of electro-magnetic(EM) waves was proposed in several literatures, in which distance estimation and 2D-localization experiments show remarkable results. However, in 3D-localization application, the estimation difficulties increase due to the nonuniform (doughnut like) radiation pattern of an omni-directional antenna related to the depth direction. For solving this problem, we added a depth sensor for improving underwater 3D-localization with the EM wave method. A micro scale pressure sensor is located in the mobile node antenna, and the depth data from the pressure sensor is calibrated by the curve fitting algorithm. We adapted the depth(z) data to 3D EM wave pattern model for the error reduction of the localization. Finally, some experiments were executed for 3D localization with the fast calculation and less errors.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.541-546
• /
• 2001

Application of bonding by adhesives can be found in many industries, particularly in advanced technological domains such as the aeronautical and space industries, automobile manufacture, and electronics. Periodic inspection with conventional ultrasonic NDE techniques is capable of indicating the presence and possible location of crack. Continuous ultrasonic attenuation monitoring has potential to supply information. This study used adhesive-bonded single-lap joints specimen to evaluate such possibility by ultrasonic signal processing method.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1286-1291
• /
• 2017

In this paper, we propose an indoor positioning system that makes use of the attenuation model for IEEE 802.11 Channel State Information (CSI) in order to determine its distance from an Access Point (AP) at a fixed position. With the use of CSI, we can mitigate the problems present in the use of Received Signal Strength Indicator (RSSI) data and increase the accuracy of the estimated mobile device's location. For the experiments we performed, we made use of the Intel 5300 Series Network Interface Card (NIC) in order to receive the channel frequency response. The Intel 5300 NIC differs from its counterparts in that it can obtain not only the RSSI but also the CSI between an access point and a mobile device. We can obtain the signal strengths and phases from subcarriers of a system which in turn means making use of this data in the estimation of a mobile device's position.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.345-347
• /
• 2016

Recently location based services is being expanded into the indoor service that can not access to the outdoor location informations, such as GPS. Thus, the research and development of an indoor positioning system with BLE(Bluetooth Low Energy) iBeacon technology has expanded. However, RSSI (Received Signal Strength Indicator) that is used as the distance information between the terminal and for positioning iBeacon signal has a problem in that distortion occurs, information such as the signal attenuation and the delay due to the characteristics of radio waves. In this paper, we propose a reliable method of verifying iBeacon signal with the signal distortion problems for reliable indoor positioning systems.