• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.3
• /
• pp.201-208
• /
• 2005

In this paper, absolute and differential eddy current signals from various defects in the steam generator tube are numerically predicted and their signal slope characteristics are investigated. The signal changes due to frequency increase are also observed. After studying signal patterns from various defects and frequencies, the analysis of mixed defect signals affected by the presence of a ferromagnetic support plate is attempted. For the signal prediction, axisymmetric finite element modeling is used and this leads us to the slope angle analysis of the signal. Results show that differential signals are useful for locating the position of a defect under the support plate, while absolute signals are easy to presume and interpret even though the effect of support plate is mixed. Combined use of these two types of signals will help us accomplish a more reliable inspection.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.4
• /
• pp.1-17
• /
• 2022

As pedestrian deaths account for a high proportion of traffic accident deaths in Korea, interest in pedestrian safety is growing. In particular, it is necessary to develop various pedestrian-centered traffic signal operation techniques to improve the pedestrian environment at signal intersections. Therefore, in this study, a method for time-of-day operating a pedestrian signal based on residual pedestrians was studied. To this end, the pedestrian signal operation technique in response to the pedestrian demand, which is operated by extending the pedestrian signal time only during the time when the pedestrian demand and the number of remaining pedestrians increase, was applied to the field. The difference in safety according to the application of the new pedestrian signal operation technique was statistically analyzed. As a result of the analysis, the residual pedestrian rate decreased by 20% (3.3 people) before application and 8% (1.4 people) after application, and the residual pedestrian rate in the crosswalk at the time of red signal decreased by 12% (1.9 people), And it was analyzed that the position of the residual pedestrian decreased by 3.3m from 5.2m before application to 1.9m after application.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.82-89
• /
• 2019

The importance of aviation safety has been emphasized recently due to the development of aviation industry. Despite the efforts of each country and the improvement of screening equipment, screening tasks are still difficult and detection failures are frequent. The purpose of this study was to examine the effect of feedback on improving signal detection performance applying a Simulated Baggage Screening Program(SBSP) for improving aviation safety. SBSP consists of three parts: image combination, option setting and experiment. The experimental images were color-coded to reflect the items' transmittance of the x-rays and could be combined as researchers' need. In the option, the researcher could set up the information, incentive, and comments needed for training to be delivered on a number of tasks and times. Experiment was conducted using SBSP and participant's performance information (hit, missed, false alarms, correct rejection, reaction time, etc.) was automatically calculated and stored. A total of 50 participants participated and each participant was randomly assigned to feedback and non-feedback group. Participants performed a total of 200 tasks and 20(10%) contained target object(gun and knife). The results showed that when the feedback was provided, the hit, correct rejection ratio and d′ were increased, however, the false alarms and miss decreased. However, there was no significant difference in response criteria(${\beta}$). In addition, implications, limitations of this study and future research were discussed.

• Journal of the Korean Society of Safety
• /
• v.6 no.3
• /
• pp.50-55
• /
• 1991

It is well known that mechanisms of fracture and crack growth depend upon material characteristics such as fracture toughness, environmental condition, cracd geometry and mechanical properties. It seems to be very important to investihate the effects of the above factors on the behavior of structural components which contain flaws for the detailed evaluation of their intehrity. In this experimental research, fracture behaviors of moterials were investigated by using Acoustic Emission(AE) technique. The fracturing processes of materials were estimated through both the tension specimens. For the detrmlnatlon of yied strength or fracture toughness, the critical applied load at the crack initiation and propagation is thought to be very important. The critical applied load(PQ) was determined through AE signal. The source of AE signal was estimated by fractography analysis. These experimental results may contribute to the safety analyses and the evaluation of strength of structures.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.9
• /
• pp.39-46
• /
• 2007

This paper presents a programmable single-phase ac power source that provides a sinusoidal output voltage with an adjustable output amplitude and frequency over a wide range as well as an arbitrary waveform. The ac power source under consideration have a linear power amplifier. The desired output values can be programmed with a personal computer. The power source operates at 220[V]/60[Hz] mains and the output voltage is isolated from the input circuit. The system consists mainly of a power converter to generate and amplify the waveform signal, a controller to control the desired output signal and measure the output parameters, and a control program to set the desired output and display the values. The prototype ac power source was constructed and tested with the results demonstrating a good performance.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.857-865
• /
• 2010

Recently the demand of the driverless rolling stock is increasing with advancement of the stable communication technique and control technique. The automatic train operating system has advantages which takes low operating cost and is able to dispose elastically in demand. Beside it provides high safety and effectiveness because it will be able to control power, signal and communication system from Operation Control Center and the safety and effectiveness are high. The establishment of PSD, Platform Screen Door, is advanced in the goal which is passenger safety, fire protection, noise and dust reduction etc. When but, two advanced systems also have risks of operation delay and accident when two systems are not controlled smoothly. Thus, I'll introduce control method between onboard controller, door control unit in rolling stock and PSD controller to help system design.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.2
• /
• pp.65-73
• /
• 2010

In an automated industry PLC plays a central role to control the manufacturing system. Therefore, fault free operation of PLC controlled manufacturing system is essential in order to maximize a firm's productivity. On the contrary, distributed nature of manufacturing system and growing complexity of the PLC programs presented a challenging task of designing a rapid fault finding system for an uninterrupted process operation. Hence, designing an intelligent monitoring, and diagnosis system is needed for smooth functioning of the operation process. In this paper, we propose a method to continuously acquire a stream of PLC signal data from the normal operational PLC-based manufacturing system and to generate diagnosis model from the observed PLC signal data. Consequently, the generated diagnosis model is used for distinguish the possible abnormalities of manufacturing system. To verify the proposed method, we provided a suitable case study of an assembly line.

• Journal of the Korean Society of Safety
• /
• v.23 no.6
• /
• pp.1-6
• /
• 2008

Machine operator and quality are affected by chip during cutting process to product machine parts. This paper presents a study of the influence of cutting conditions on the surface roughness obtained by turning using Taguchi method for safety of turning operator. In the machining of titanium alloy, high cutting temperature and strong chemical affinity between the tool and the work material are generated because of its low thermal conductivity and chemical reactivity. Therefore titanium alloys are known as difficult-to materials. An orthogonal array, the signal-to-noise ratio, the analysis of variance are employed to investigate the cutting characteristics of implant material bars using tungsten carbide cutting tools of throwaway type. Also Experimental results by orthogonal array are compared with optimal condition to evaluate advanced reliability. Required simulations and experiments are performed, and the results are investigated.

• Nuclear Engineering and Technology
• /
• v.47 no.2
• /
• pp.219-225
• /
• 2015

In this paper, a three-dimensional model for the dynamic analysis of a flywheel based on the finite element method is presented. The static structure analysis for the model provides stress and strain distribution cloud charts. The modal analysis provides the basis of dynamic analysis due to its ability to obtain the natural frequencies and the vibration-made vectors of the first 10 orders. The results show the main faults are attrition and cracks, while also indicating the locations and patterns of faults. The harmonic response simulation was performed to gain the vibration response of the flywheel under operation. In this paper, we present a Hilbert-Huang transform (HHT) algorithm for flywheel vibration analysis. The simulation indicated that the proposed flywheel vibration signal analysis method performs well, which means that the method can lay the foundation for the detection and diagnosis in a reactor main coolant pump.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2745-2752
• /
• 2014

In recent years, Transport Demand Management has been conducted for the efficient management of transport. In ITS applications in particular, the prerequisite is accurate and reliable positioning. However, the major problems are satellite signal outage, and multipath. This paper proposes that outage and multipath measurement can be detected and estimated using elevation angle and signal to noise ratio data association relation in stand-alone GPS. In order to verify the performance of the proposed method, it is then evaluated by the car test. the evaluation test environment has low accuracy and unreliable positioning because of signal outage or multipath such as steep hill and high buildings. In the evaluation test result, 918times abnormal signal occurred and it was confirmed that the proposed method showed more improved 9.48m(RMS) horizontal positioning error than without proposed method.