• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.585-590
• /
• 2000

Recently, It is gradually raised necessity that thickness of thin film is measured accuracy and managed in industrial circles and medical world. Ultrasonic Signal processing method is likely to become a very powerful method for NDE method of detection of microdefects and thickness measurement of thin film below the limit of Ultrasonic distance resolution in the opaque materials, provides useful information that cannot be obtained by a conventional measuring system. In the present research, considering a thin film below the limit of ultrasonic distance resolution sandwiched between three substances as acoustical analysis model, demonstrated the usefulness of ultrasonic Signal processing technique using information of ultrasonic frequency for NDE of measurements of thin film thickness, sound velocity, and step height, regardless of interference phenomenon. Numeral information was deduced and quantified effective information from the image. Also, pattern recognition of a defected input image was performed by neural network algorithm. Input pattern of various numeral was composed combinationally, and then, it was studied by neural network. Furthermore, possibility of pattern recognition was confirmed on artifical defected input data formed by simulation. Finally, application on unknown input pattern was also examined.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1779-1785
• /
• 2006

This paper presents a method of virtual robot arm control by EMG pattern recognition using the proposed hybrid system. The proposed hybrid system is composed of the LVQ and the SOFM, and the SOFM is used for the preprocessing of the LVQ. The SOFM converts the high dimensional EMG signals to 2-dimensional data. The EMG measurement system uses three surface electrodes to acquire the EMG signal from operator. Six hand gestures can be classified sufficiently by the proposed hybrid system. Experimental results are presented that show the effectiveness of the virtual robot arm control by the proposed hybrid system based classifier for the recognition of hand gestures from EMG signal patterns.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.1
• /
• pp.192-199
• /
• 2016

With changes in insulated defects, the environment, and so on, new partial discharge (PD) data are highly different from the original samples. It leads to a decrease in on-line recognition rate. The UHF signal and pulse current signal of four kinds of typical artificial defect models in gas insulated switchgear (GIS) are obtained simultaneously by experiment. The relationship map of ultra-high frequency (UHF) cumulative energy and its corresponding apparent discharge of four kinds of typical artificial defect models are plotted. UHF cumulative energy and its corresponding apparent discharge are used as inputs. The support vector machine (SVM) incremental method is constructed. Examples show that the PD SVM incremental method based on simulated annealing (SA) effectively speeds up the data update rate and improves the adaptability of the classifier compared with the original method, in that the total sample is constituted by the old and new data. The PD SVM incremental method is a better pattern recognition technology for PD on-line monitoring.

• The Journal of Korea Robotics Society
• /
• v.15 no.1
• /
• pp.62-69
• /
• 2020

This paper proposes a pattern recognition and classification algorithm based on a circular structure that can reflect the characteristics of the sEMG (surface electromyogram) signal measured in the arm without putting the placement limitation of electrodes. In order to recognize the same pattern at all times despite the electrode locations, the data acquisition of the circular structure is proposed so that all sEMG channels can be connected to one another. For the performance verification of the sEMG pattern recognition and classification using the developed algorithm, several experiments are conducted. First, although there are no differences in the sEMG signals themselves, the similar patterns are much better identified in the case of the circular structure algorithm than that of conventional linear ones. Second, a comparative analysis is shown with the supervised learning schemes such as MLP, CNN, and LSTM. In the results, the classification recognition accuracy of the circular structure is above 98% in all postures. It is much higher than the results obtained when the linear structure is used. The recognition difference between the circular and linear structures was the biggest with about 4% when the MLP network was used.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.2
• /
• pp.9-16
• /
• 2003

We proposed a method of a virtual robot arm controlled by the EMG pattern recognition using an improved SOFM method. The proposed method is simple in that the EMG signals are used as SOFM's input directly without preprocessing but nevertheless input patterns are reliably classified and then used for fuzzy logic systems to automatically tune the neighborhood and the learning rate. In order to verify the effectiveness of the proposed method, we experimented on EMG pattern recognition of 6 movements from the shoulder, wrist, and elbow. Experimental results show that the proposed SOFM method has 21.7% higher recognition rate than the general SOFM method, the average number of learning iterations has been decreased, and then the virtual robot arm is controlled by EMG pattern recognition.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.4
• /
• pp.779-787
• /
• 2010

In this paper, We introduce electrical tracking generated from surface activity associated with flow of leakage current on insulator under wet and contaminated conditions and design electrical tracking pattern recognition system by using LabVIEW. We measure the leaking current of contaminated wire by using LabVIEW software and the NI-c-DAQ 9172 and NI-9239 hardware. As pattern recognition algorithm and optimization algorithm for electrical tracking system, neural networks, Radial Basis Function Neural Networks(RBFNNs) and particle swarm optimization are exploited. The designed electrical tracking recognition system consists of two parts such as the hardware part of electrical tracking generator, the NI-c-DAQ 9172 and NI-9239 hardware and the software part of LabVIEW block diagram, LabVIEW front panel and pattern recognition-related application software. The electrical tracking system decides whether electrical tracking generate or not on electrical wire.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.4
• /
• pp.520-530
• /
• 1996

In this study, the artificial defects in rotary compressor are classified using pattern recognition of acoustic emission signal. For this purpose the computer program is developed. The neural network classifier is compared with the statistical classifier such as the linear discriminant function classifier and empirical Bayesian classifier. It is concluded that the former is better. It is possible to acquire the recognition rate of above 99% by neural network classifier.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.5
• /
• pp.880-886
• /
• 1987

This paper proposes a new pattern recognition system using Radon transform and analyzes the performances of the system for given input patterns. The proposed system uses many optical parts in order to utilize the high speed characteristics of light and processes a signal easily by transforming 2-D image into a 1-D signal to increase flexibility. The squared Mahalanobis distance obtained from means and standard deviations of the features for the given input patterns is used for discrimination. As a result, this system represents a better recognition rate than any other systems using the same input patterns.

• Current Optics and Photonics
• /
• v.7 no.5
• /
• pp.511-517
• /
• 2023

Pipelines play an important role in urban water supply and drainage, oil and gas transmission, etc. This paper presents a technique for pattern recognition of fiber optic vibration signals collected by a distributed vibration sensing (DVS) system using a deep learning residual network (ResNet). The optical fiber is laid on the pipeline, and the signal is collected by the DVS system and converted into a 64 × 64 single-channel grayscale image. The grayscale image is input into the ResNet to extract features, and finally the K-nearest-neighbors (KNN) algorithm is used to achieve the classification and recognition of pipeline damage.

• Smart Media Journal
• /
• v.8 no.3
• /
• pp.62-69
• /
• 2019

Electrocardiogram (ECG) signals cannot be counterfeited and can easily acquire signals from both wrists. In this paper, we propose a method of generating a coupling image using direction information of ECG signals as well as its usage in a personal recognition method. The proposed coupling image is generated by using forward ECG signal and rotated inverse ECG signal based on R-peak, and the generated coupling image shows a unique pattern and brightness. In addition, R-peak data is increased through the ECG signal calculation of the same beat, and it is thus possible to improve the recognition performance of the individual. The generated coupling image extracts characteristics of pattern and brightness by using the proposed convolutional neural network and reduces data size by using multiple pooling layers to improve network speed. The experiment uses public ECG data of 47 people and conducts comparative experiments using five networks with top 5 performance data among the public and the proposed networks. Experimental results show that the recognition performance of the proposed network is the highest with 99.28%, confirming potential of the personal recognition.