• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.1
• /
• pp.129-139
• /
• 1989

During a signal is being transmitted, an interference signal can be introduced through an unknown channel. In these cases, an adaptive system, so called adaptive noise canceller, can restore the original signal from the corrupted signal by first identifying the unknown interference channel on the minimum mean square error criteron, and then by cancelling the interference signal using the identified interference channel. Whereas this method is quite effective when the a priori knowledges about the characteristics of the interference signal and of the intrference channel are unknown or time-varyng, but has a drawback that the presence of the original signal has a severe effect on the optimum value of the interference channel to be identified on the miniumum mean square eror criterion In this paper an adaptive noise canceller and its algorithms are introduced that can restore the original signal more accurately especially when the correlatedness between the original signal and the interference signal is small.

• Journal of electromagnetic engineering and science
• /
• v.12 no.1
• /
• pp.94-100
• /
• 2012

Radio interference has been occurring in mobile communication services on the southern seashore in Korea. Monitoring the radio interference signal revealed that the main reason for the radio interference was a radio ducting signal coming from the seaside of Japan. In this paper, we have analyzed the effect of interference on WiMAX service using a 2.5 GHz frequency band between Korea and Japan. We focus on the interference scenario from base station to base station and we use the Minimum Coupling Loss (MCL) method for interference analysis and the Advanced Propagation Model (APM) for calculating the propagation loss in ducts. The propagation model is also compared with experimental measurement data. We confirm that the interfering signal strength depends on the antenna height and this result can be applied to deployment planning for each system with an interference impact acceptable to both parties.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.15 no.6
• /
• pp.29-34
• /
• 1978

It has been investigated that the elect of an wideband FDM-FM signal upon an M-ary coherent PSK (MCPSK) signal in an intersystem radio interference environment between analog and digital systems, which had not been discussed before and had been obscure. It is assumed that PSK and FM signal are adjacently allocated in same radio frequency band. And the symbol error performance of MCPSK signal with co-channel and adjacent channel interference from an FDM-FM signal is evaluated with considering the receiver noise. The numerical results for the theoretical symbol error rates of MCPSK system in the presence of Gaussian noise and co-channel or adjacent channel interference are given in graphical forms as the function of carrier-to-noise ratio (CNR), carrier-to-interference ratio (CIR) and normalized carrier separation between the desired PSK and interfering FM signal. The objective of this research is to find some optimal conditions for coexistence of analog and digital systems in an intersystem interference environment. The results we obtained here stress a possible utilization of them for designing the frequency allocation, bandwidth and power of PSK channel in the intersystem interference from an FDM-FM signall.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.12
• /
• pp.1994-2000
• /
• 1993

A new lattice structure using decision feedback and augmented prediction for estimating and suppressing the narrowband interference is presented. The performance of the proposed interference canceller is compared to the conventional interference cancellation filter. The reference signal of the interference canceller is formed by using the chip decisions, which is correlated with the narrowband interference components of the received signal. The decision feedback technique reduce the distortion of the desired signal which is introduced by the interference canceller through the use of feedback chip decisions. And by linear prediction of the error signal, the residual interference component of can be eliminated, Using this unconteminated error signal to update the adaptive filter coefficients, the performance of the rejection can be improved. In the simulation, it is assumed that the processing gains are 7 and 15, signal to interference ratio is -10[dB], and 5% interference band. The results show that the BER performance of the proposed filter structure is improved by 1~3dB.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.727-730
• /
• 2002

This paper proposes the interference cancellation improvement in smart antenna system by using Applebaum array covariance matrix adjustment. This technique adds the specific adjustable multipliers with both desired signal covariance matrix and interference signal covariance matrices in order to overcome some disadvantages and improve the interference cancellation efficiency of Applebaum array. It is based on the desired and undesired signal power or desired signal-to-interference-plus-thermal noise ratio (SINR). As the result from demonstration, the proposed technique can improve and increase the interference cancellation efficiency in smart antenna better than the conventional technique.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.8
• /
• pp.2170-2187
• /
• 2023

The general interference is the imperative trouble for simultaneous wireless information and power transfer (SWIPT) system. Although interference has bad influences on the performance of the system, it carries energy simultaneously. In this paper, the energy-constrained relay of the SWIPT system needs to spend much time on energy collecting (EC) in the information transmission (IT) period. Therefore, we propose the scheme of interference signal energy collecting (ISEC) when the interference is strong, and the SWIPT system does not carry out IT. The relay of the system continues to collect energy and stores it until the interference has minimal impact on IT. Then the system performs IT. We divide the collected interference energy equally into several parts, and each IT block receives one part. The proposed scheme is appealing because it can reduce the time of EC in IT period to make the relay spends more time forwarding the received signal in order to improve the performance of the system throughput. Furthermore, we propose a time-switching (TS) protocol based on EC at the relay. And it allows the relay forwarding signal at an appropriate power. Under the protocol, the time of EC can be flexible according to the forwarding power that we give so that the collected energy can be used more efficiently. We give the expressions of the system throughput according to the proposed scheme and protocol. Moreover, the influence of the interference power on the system throughput is also studied.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.2
• /
• pp.424-442
• /
• 2014

Most recent research on iterative solutions for interference alignment (IA) presents solutions assuming channel reciprocity based on the suppression of interference from undesired sources by using an appropriate decoding matrix also known as a receiver combining matrix for multiple input multiple output (MIMO) interference channel networks and reciprocal networks. In this paper, we present an alternative solution for IA by designing precoding and decoding matrices based on the concept of signal leakage (the measure of signal power that leaks to unintended users) on each transmit side. We propose an iterative algorithm for an IA solution based on maximization of the signal-to-leakage-and-noise ratio (SLNR) of the transmitted signal from each transmitter. In order to make an algorithm removing the requirement of channel reciprocity, we deploy maximization of the signal-to-interference-and-noise ratio (SINR) in the design of the decoding matrices. We show through simulation that minimizing the leakage in each transmission can help achieve enhanced performance in terms of aggregate sum capacity in the system.

• Journal of Electrical Engineering and information Science
• /
• v.3 no.1
• /
• pp.126-130
• /
• 1998

In this paper, a new interference rejection filter using the data-recycling technique is presented. The reference signal of the interference rejection filter is formed by using chip decisions, which is correlated with the narrowband interference components of the received signal. The decision feedback techniques reduce the distortion of the desired signal, which is introduced by the interference rejection filter through he use of feedback chip decisions. In order to update the filter coefficients a simple and efficient data-recycling technique that has improved performance over the conventional LMS algorithm is used. The performance of the proposed interference rejection filter is compared to filter with conventional LMS linear filter. The results show that the convergence speed of the proposed interference rejection filter using decision feedback and data-recycling technique is significantly faster than that of the conventional filters. Also, BER performance of the interference rejection filter demonstrates the superiority of the proposed filter algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.269-277
• /
• 2012

When there are mismatches between the beamforming steering vector and the array response vector for the desired signal, the performance can be severely degraded as the adaptive array attempts to suppress the desired signal as well as interferences. In this paper, an robust method is proposed for the adaptive array in the presence of both direction errors and random errors in the steering vector. The proposed method first finds a signal-plus-interference subspace (SIS) from the correlation matrix, which in turn is exploited to extract an interference subspace based on the structure of a uniform linear array (ULA), the effect of the desired signal direction vector being reduced as much as possible. Then, the weight vector is attained to be orthogonal to the interference subspace. Simulation shows that the proposed method, in terms of signal-to-interference plus noise ratio (SINR), outperforms existing ones such as the doubly constrained robust Capon beamformer (DCRCB).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.141-148
• /
• 2006

This paper deals with the performance improvement by eliminating loop interference signal and inserting adaptive equalizer for phase compensation in OFDMA based Wibro relay station. The Wibro relay station is used for the extension of communication service area and for throughput improvement of base station. The loop interference is important factor of performance determination of relay station when transmitter and receiver is very closely located. In order to design interference canceller, we generated base-band OFDMA signal and then transmitted the signal along with pilot tones alined with two different combinations for training mode. And then, we generated received fading signal due to the loop interference added noise to the received signal. In the receiver, the transmitted signal is recovered by elimination of the interference signal with channel estimate and compensating phase by adaptive equalizer. The performance improvement was verified by computer simulation which show channel estimation, constellation of signal and BER characteristics according to the variation of SNR ratio.