• Tribology and Lubricants
• /
• v.15 no.4
• /
• pp.335-342
• /
• 1999

Corrosion of the disk has been an ongoing concern for the manufacturers of hard disk drives. With the advent of magnetoresistive (MR) head, very low levels of corrosion and contamination become more critical since the raised defects and corrosion products on the disk surface-anything that heats the MR sensor due to the contact-can distort the output signal of the head. This phenomenon is called as thermal asperity. In this paper, the effect of corrosion as a form of Co migration on the occurrence of thermal asperity in MR drives was investigated. The corrosion test at high temperature (60$^{\circ}C$) and high relative humidity (80%) was emphasized in this study and the testing results at ambient condition were compared. The corrosion on the disks was characterized as the amount of Co ion migration using an ion chromatography (IC) and a time-of-flight secondary ion mass spectroscopy (TOF-SIMS). It is proved that corrosion on the disk surface after storage testing is closely correlated to the amount of Co ions migration from the magnetic layer to disk surfaces and higher Co migration causes more thermal asperities in the drive. In order to reduce Co migration, several methods such as burnishing process and structure of the carbon overcoat were investigated. It is found that the hydrogenated carbon overcoat shows the least Co migration among different types of overcoat layer. However, the most effective way to reduce Co migration is the application of Cr layer between the overcoat and the magnetic alloy layer.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.9-19
• /
• 2006

The purpose of this study was to analyze the kinematic variables of the lower limbs joints and the muscle activity for lower limbs during the level and downhill running. The subjects were 6 males of twenties and required to run on the level and downhill which was -7% grade treadmill at 8.3km/h. The running performances were filmed by high speed video camera and EMG signal was gained by ME3000P8 Measurement Unit. Rectus femoris(RF), Vastus lateralis(VL), Gluteus medius(GLU), Biceps femoris(BF), gastrocnemius medial head(GM), gastrocnemius lateral head(GL), Soleus(SO), Tibialis anterior(TA) were selected. The result of this study were as follows: 1. Ankle, knee, hip joint in downhill running showed less movement than the level running but, no significant difference. 2. VL and BF during the support phase in downhill running showed Iess muscle activity than the level running. but RF showed the opposite result. 3. GM, GL, SO adn TA during the supports phase in downhill running showed less muscle activity than the level running.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.1
• /
• pp.10-21
• /
• 2003

During seek operation in disk drives, the recording head is moved toward desired track by seek servo controller and then is settled onto the center of the desired track by settling servo controller. If the head speed at the start of settling servo control is not slow, it may produce overshoot relative to the center of track and thus extend the settling time. The degradation in settling performance will be more severe as the track width becomes smaller for higher density of data storage. We design a new settling servo controller for minimizing settling time based on the pole-zero cancellation. In order to cancel slow poles in settling response, we apply discrete pulse signals to the system in addition to the state feedback control. For exact pole-zero cancellation, we consider the dynamics of power amplifier used for actuator current regulation and the effects of delay in control action. In addition, we present system parameter identification algerian for the robustness of our controller to system parameter variation. In order to demonstrate the practical use of our controller, we present experimental results obtained by using a commercially available disk drive.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5C
• /
• pp.309-316
• /
• 2011

In this paper, equalization zone of two crosstalk cancellation (CC) schemes, which are the one based on only head related transfer function (HRTF) and the other one based on interaural intensity/time difference (ITD/IID) as well as HRTF is studied. To do this, the condition numbers and ITD/IID levels of two schemes are shown.

• Convergence Security Journal
• /
• v.13 no.6
• /
• pp.69-76
• /
• 2013

A lot of researches have been done to improve the energy efficiency of Wireless Sensor Networks. But all the current researches are based on the idea of direct communication between cluster head and sink node. Previous results assume that node can intelligently regulate signal energy according to the distance between nodes. It is difficult to implement algorithms based on this assumption. We present a multi-level routing algorithm from the sink node to all other nodes which have fixed radio wave radius. We also show the energy saving efficiency and the implementation in real WSN using the simulation result.

• Animal cells and systems
• /
• v.7 no.1
• /
• pp.57-62
• /
• 2003

Flounder B lymphocytes isolated from different tissues were studied in terms of cell proliferation, apoptosis and the effects of cortisol on these processes. B lymphocytes, isolated from the flounder head kidney and spleen, were characterized by higher proliferation and lower intracellular calcium ($Ca^2$) response to lgcrosslinking compared with peripheral blood B lymphocytes. Cortisol induced high levels of apoptosis (150% of control levels) in peripheral blood B lymphocytes, in combination with a stimulatory LPS signal. Head kidney and to a lesser extent spleen B lymphocytes, although less sensitive than their equivalent in peripheral blood, underwent cortisol-induced apoptosis irrespective of extra stimulation up to 142% of control levels. Also proliferation with and without LPS stimulation was suppressed by cortisol (compared to plasma values measured during stress conditions) that is effective in inducing a significant increase in apoptosis in all three populations of B-cells, suggesting that cortisol may be important for immunoregulation in both stressed and non-stressed conditions. This implies possible severe impact of stress on lymphocyte development and activity, Different sensitivity of B-cells to the corticosteroid, with respect to developmental stage and activity, may prevent excessive and long lasting depletion of B-lymphocytes.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.796-801
• /
• 1994

Measuring noise, sound quality or acoustical comfort presents a difficult task for the acoustic engineer. Sound and noise are ultimately jugded by human beings acting as analysers. Regulations for determining noise levels are based on A-weighted SPL measurement performed with only one microphone. This method of measurement is usually specified when determining whether the ear can be physically damaged. Such a simple measurement procedure is not able to determine annoyance of sound events or sound quality in general. For some years investigations with binaural measurement analysis technique have shown new possibilities for the objective determination of sound quality. By using Artificial Head technology /1/, /2/ in conjunction with psychoacoustic evaluation algorithms - and taking into account binaural signal processing of human hearing, considerable progress regarding the analysis of sounds has been made. Because sound events often arise in a complex way, direct conclusions about components subjectively judged to be annoying with regard to their causes and transmission paths, can be drawn in a limited way only. A new procedure, complementing binaural measurement technology combined with mulit-channel measuements of acceleration sensor signals has been developed. This involves correlating signals influencing sound quality, analyzed by means of human hearing, with signals form different acceleration sensors fixed at different positions of the sound source. Now it is possible to recognize the source and the transmission way of those signals which have an influence on the annoyance of sound.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.33 no.3
• /
• pp.142-155
• /
• 2022

Diagnosis using voice is non-invasive and can be implemented through various voice recording devices; therefore, it can be used as a screening or diagnostic assistant tool for laryngeal voice disease to help clinicians. The development of artificial intelligence algorithms, such as machine learning, led by the latest deep learning technology, began with a binary classification that distinguishes normal and pathological voices; consequently, it has contributed in improving the accuracy of multi-classification to classify various types of pathological voices. However, no conclusions that can be applied in the clinical field have yet been achieved. Most studies on pathological speech classification using speech have used the continuous short vowel /ah/, which is relatively easier than using continuous or running speech. However, continuous speech has the potential to derive more accurate results as additional information can be obtained from the change in the voice signal over time. In this review, explanations of terms related to artificial intelligence research, and the latest trends in machine learning and deep learning algorithms are reviewed; furthermore, the latest research results and limitations are introduced to provide future directions for researchers.

• The Plant Pathology Journal
• /
• v.40 no.1
• /
• pp.83-97
• /
• 2024

Fusarium graminearum, the causal agent of Fusarium head blight (FHB) in cereal crops, employs the production of sexual fruiting bodies (perithecia) on plant debris as a strategy for overwintering and dissemination. In an artificial condition (e.g., carrot agar medium), the F. graminearum Z3643 strain was capable of producing perithecia predominantly in the central region of the fungal culture where aerial hyphae naturally collapsed. To unravel the intricate relationship between natural aerial hyphae collapse and sexual development in this fungus, we focused on 699 genes differentially expressed during aerial hyphae collapse, with 26 selected for further analysis. Targeted gene deletion and quantitative real-time PCR analyses elucidated the functions of specific genes during natural aerial hyphae collapse and perithecium formation. Furthermore, comparative gene expression analyses between natural collapse and artificial removal conditions reveal distinct temporal profiles, with the latter inducing a more rapid and pronounced response, particularly in MAT gene expression. Notably, FGSG_09210 and FGSG_09896 play crucial roles in sexual development and aerial hyphae growth, respectively. Taken together, it is plausible that if aerial hyphae collapse occurs on plant debris, it may serve as a physical cue for inducing perithecium formation in crop fields, representing a survival strategy for F. graminearum during winter. Insights into the molecular mechanisms underlying aerial hyphae collapse provides offer potential strategies for disease control against FHB caused by F. graminearum.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.42-48
• /
• 2003

LPG has been a broad concern of pro-environmental alternative fuel for vehicles. Recently, the new Liquid Phase LPG Injection(LPLI) system extends the limit of power of LPG engine and gives a chance to substitute LPG engine for diesel engine of heavy duty vehicles that are the main resources of air pollution in urban area. Large bore size of heavy duty LPG engine derives a serious knock problem. To find an optimal MBT conditions, it is necessary to know how the flame develops in the combustion chamber and find where the knock positions are. In this study. the ion-probe head gasket was used to estimate the knock position. Inverse operation of the ion-probe signal provides the flame developing characteristics. The further the position is from the spark plug, the later the flame arrives and the more times knock occurs. The main factor that effects knock position is inferred a flor situation of mixed gas in the combustion chamber.