• Journal of the Korean Society for Railway
• /
• v.5 no.2
• /
• pp.55-60
• /
• 2002

This study proposes the post-processor simulator construction of ultrasonic signal for integrity evaluation of railway truck. For these purposes, the ultrasonic signals for defects(crack) of weld zone in frames are acquired in the type of time series data and echo strength. The detection of the natural defects in railway truck is performed using the characteristics of echodynamic pattern in ultrasonic signal. The constructed post-processor simulator agree fairly well with the measured results of test block(defect location, beam propagation distance, echo strength, etc). Proposed post-processor simulator construction of ultrasonic in this study can be used for the integrity evaluation of railway truck.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.2
• /
• pp.139-147
• /
• 1987

This paper presented a method evaluating the signal reliability for signal stuck-at-type in digital circuits. Here, the signal reliability is defined as the probability that circuit output is correct, even though the fault existed at the internal parts of digital circuit. In evaluating the signal reliability, this paper presented not only fault model and algorithm for signal stuck-at-type fault but also computer program for evaluating the signal reliability with respect to complex and large circuit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.6C
• /
• pp.502-511
• /
• 2012

As the importance of GNSS system increases, the necessity of independent system is increased also. When the independent GNSS system is required, GNSS signal design is necessary with requirement definition. This paper suggests the design method of GNSS signal using the analysis result of receiver performance. First, the candidates are defined based on the design elements. Then the receiver performance of the candidates is analyzed based on the performance evaluation parameters. The weights of performance evaluation parameter are defined in order to consider the receiver performance in a various aspects. Finally, the calculation of normalized performance evaluation parameters and weights are derived to obtain the compared value for signal selection. Spreading code, modulation method and carrier frequency are considered as design parameters. Also, correlation width, DLL PLL thermal noise jitter, frequency bandwidth and side lobe peak ratio are considered as performance evaluation parameters. And positioning performance, robustness to noise, bandwidth efficiency are considered as the performance aspects. This paper analyzes the performance of each candidate using software based simulator and suggest the method to compare objectively the performance of each candidates.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.1
• /
• pp.1-12
• /
• 2012

Even though the semi-actuated signal control system based on image detectors has been spreading in Korea, any appropriate methods to evaluate the effectiveness and performance has not been established yet. Therefore, this research effort is aiming at developing a systematic method for evaluating the effectiveness and performance of the semi-actuated signal control system based on image detectors. To this end, this research firstly established measures of effectiveness(MOEs) and associated information to be surveyed from fields. Secondly, this research provided a procedure and methodology to evaluate any improvements due to the introduction of a semi-actuated signal control system based on image detectors. The developed methodology was examined at a case study site located in the city of Paju. As a result of the evaluation, the MOEs including traffic throughput, travel speeds, split usage rate, progression rate, etc. showed positive improvements though individual signalized intersections as well as coordinated corridors.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.611-616
• /
• 2023

ECG(electrocardiogram) is a test used to measure the rate and regularity of heartbeats, as well as the size and position of the chambers, the presence of any damage to the heart, and the cause of all heart diseases can be found. Because the ECG signal obtained using the ECG-KIT includes noise in the ECG signal, noise must be removed from the ECG signal to apply to the deep learning. In this paper, the noise of the ECG signal was removed using the digital IIR Butterworth low-pass filter. When the performance evaluation of the three activation functions, sigmoid(), ReLU(), and tanh() functions, was compared using the deep learning model of LSTM, it was confirmed that the activation function with the smallest error was the tanh() function. Also, When the performance evaluation and elapsed time were compared for LSTM and GRU models, it was confirmed that the GRU model was superior to the LSTM model.

• Journal of Biomedical Engineering Research
• /
• v.15 no.3
• /
• pp.305-316
• /
• 1994

All physical data in the real world are nonstationary signals that have the time varying statistical characteristics. Although few algorithms suitable to process the nonstationary signals have ever been suggested, these are treated the nonstationary signals under the assumption that the nonstationary signal is a piece-wise stationary signal. Recently, statistical analysis algorithms for the nonstationary signal have concentrated so much interest. In this paper, nonstationary EMG signals are mapped onto the orthogonal wavelet transform domain so that the eigenvalue spread of its autocorrelation matrix could be more smaller than that in the time domain. Then the model in the wavelet transform domain and an algorithm to estimate the model parameters are suggested. Also, an test signal generated by a white gaussian noise and the EMG signal are identified, and the algorithm performance is considered in the sense of the mean square error and the evaluation parameters.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1994.06a
• /
• pp.919-924
• /
• 1994

The use of adaptive feedback cancellation to prevent howling requires a reference signal that is correlated with the feedback signal by is not correlated with the input signal. Such a signal is hard to obtain in hearing aids. In this paper, the use fo frequency compression to decorrelate the output signal with input signal for use as reference is presented. Performance evaluation results indicate that with the proper choice of system parameters, the use of this system can provide a significant increase in howling margin with minimal deterioration in output signal quality.

• Current Optics and Photonics
• /
• v.7 no.1
• /
• pp.28-32
• /
• 2023

Frequency characteristics of gain-saturated erbium-doped fiber amplifier (EDFA) are experimentally evaluated to mitigate the optical signal fluctuation induced by atmospheric turbulence in terrestrial freespace optical communication systems. Here, an acousto-optic modulator (AOM) is used to emulate optical signal fluctuations induced by atmospheric turbulence. The waveform which is generated in proportion to the refractive-index structural parameters is used to drive the AOM at various periodic frequencies. Thus, the dependence of the signal fluctuation suppression on the frequency is evaluated. The experiment is conducted using a periodic frequency sweep of the AOM driving voltage waveform and signal input power variation of the amplifier. It is observed that a low periodic frequency and high input signal power effectively suppress the optical signal fluctuation. This study evaluates the experimental results from the high-pass filter and gain-saturation characteristics of the EDFA.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.11
• /
• pp.1148-1156
• /
• 2009

ETRI has developed GNSS digitized IF signal generator for providing test and evaluation environment for various software level application and navigation algorithm in Global Navigation Satellite System(GNSS). GNSS digitized IF signal generator provides two main capabilities, GPS and Galileo raw data generation and digitized IF signal generation. GNSS digitized IF signal generator consists of five main modules which are GNSS Satellite Orbit Simulation Module, Navigation Message Generation Module, Error Generation Module, GNSS IF Signal Generation Module, and Message & Signal Steering Module. We verified the signal generated by the GNSS signal generation algorithm using software receiver for generation of signal brother to real GNSS signal.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.76-82
• /
• 2000

This paper describes the machining characteristics of cylindrical plunge grinding. The study investigates the process using the current signals of a spindle motor through a hall sensor. Grinding experiments were conducted under various conditions such as wheel speeds, workpiece speeds and infeed rates with a conventional vitrified bonded wheel. Analyzing the current signal of the spindle motor, a relationship between current signals and the metal removal rate in terms of the in(red rate is induced. It was also shown that a hall sensor has similar capabilities in evaluation of grinding behavior compared to the AE signals, which are useful far monitoring the grinding process.