• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.446-456
• /
• 2007

Increased access to broadband networks has led to a fast-growing demand for voice and video over IP(VVoIP) applications such as Internet telephony(VoIP), videoconferencing, and IP television(IPTV). For pro-active troubleshooting of VVoIP performance bottlenecks that manifest to end-users as performance impairments such as video frame freezing and voice dropouts, network operators cannot rely on actual end-users to report their subjective quality of experience(QoE). Hence, automated and objective techniques that provide real-time or online VVoIP QoE estimates are vital. Objective techniques developed to-date estimate VVoIP QoE by performing frame-to-frame peak-signal-to-noise ratio(PSNR) comparisons of the original video sequence and the reconstructed video sequence obtained from the sender-side and receiver-side, respectively. Since processing such video sequences is time consuming and computationally intensive, existing objective techniques cannot provide online VVoIP QoE. In this paper, we present a novel framework that can provide online estimates of VVoIP QoE on network paths without end-user involvement and without requiring any video sequences. The framework features the "GAP-model", which is an offline model of QoE expressed as a function of measurable network factors such as bandwidth, delay, jitter, and loss. Using the GAP-model, our online framework can produce VVoIP QoE estimates in terms of "Good", "Acceptable", or "Poor"(GAP) grades of perceptual quality solely from the online measured network conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1685-1695
• /
• 2010

In this paper, we propose a new reliable multicast MAC protocol over the IEEE 802.11-based tactical ad hoc networks. The major contribution compared to the previous reliable multicast schemes using consecutive CTSs/ACKs is that the proposed scheme can send multiple CTS/ACK messages concurrently assisted by MC-DS/CDMA mechanisms. When multiple receivers receive the RTS/DATA message from a sender, they respond with the CTS/ACK message spread with pre-assigned code in the same time interval. The proposed scheme can reduce the overhead of multiple CTSs/ACKs. It is also possible to alleviate the received signal strength at the enemy detector and thus it improves low probability of detection performance. Through simulations and analysis, the proposed scheme outperforms that of the multiple CTSs/ACks in terms of the throughput, transmission delay and low probability of detection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12B
• /
• pp.1211-1218
• /
• 2010

OSPF is the optimized routing protocol in wired network and considered as a tactical routing protocol in wireless tactical communication network. However because it is designed basically based on wired environment, it runs inadequately in wireless tactical environment: noise and jamming signal. So, we proposed new OSPF cost function to develop active routing protocol in wireless tactical communication network. In redefined cost function, there are four parameters that are relative transmission speed, link weight, router utilization, link average BER(Bit Error Rate). These parameters reflect wireless tactical characters. Also, we remodel the option field in Hello packet. It can help user to periodically check the link state. From the simulation result, it is shown that proposed OSPF is better than OSPF in jamming situation and has accumulative delay gain with dispersion of traffic load in entire network.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.1B
• /
• pp.86-97
• /
• 2009

RTLS is a system for automatically locating and tracking people and objects. The TDOA-based RTLS determines the location of the tag by calculating the time differences of a signal received from the tag. In TDOA-based RTLS, time synchronization is essential to calculate the time difference between readers. This paper presents a precision time synchronization method for TDOA-based RTLS over IEEE 802.15.4. In order to achieve precision time synchronization in IEEE 802.15.4 radio, we analyzed the error factors of delay and jitter. We also deal with the implementation of hardware assisted time stamping and the Kalman filtering method to minimize the error factors. In addition, this paper described the experiments and performance evaluation of the proposed precision time synchronization method in IEEE 802.15.4 radio. The results show that the nodes in a network can maintain their clocks to within 10 nanoseconds offset from the reference clock.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.2
• /
• pp.124-130
• /
• 2013

The performance of underwater acoustic communication system is sensitive to the ISI(Inter-Symbol Interference) due to delay spread develop of multipath signal propagation. The equalizer is used to combat the ISI. In this paper, the performances of underwater acoustic communication with turbo equalizer were evaluated by real data collected in Korean littoral sea. As a result, when one iterative decoding using turbo equalizer is applied, the performance was improved 1.5 dB than the case of the non-iterative equalizer at BER $10^{-4}$. In the case of two or three iterations the performance was enhanced about 3.5 dB, but the performance wasn't improved any more in the case of more than three times.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.9
• /
• pp.1400-1409
• /
• 2001

This paper describes a fiber optic sensor suitable for non-contact detection of ultrasonic waves. This sensor is based on a fiber optic Sagnac interferometer. Quadrature phase bias between two interfering laser beams in Sagnac loop is introduced by a polarization controller. A stable quadrature phase bias can be confirmed by observing the interferometer output versus phase bias. This method eliminates a digital signal processing for detection of ultrasonic waves using Sagnac interferometer. Interference intensity is affected by the frequency of ultrasonic waves and the time delay of Sagnac loop. Collimator is attached to the end of the probing fiber to focus the light beam onto the specimen surface and to collect the reflected light back into the fiber probe. Ultrasonic waves produced by conventional ultrasonic transducers are detected. This fiber optic sensor based on Sagnac interferometer is very effective for detection of small displacement with high frequency such as ultrasonic waves used in conventional non-destructive testing.

• Journal of Biomedical Engineering Research
• /
• v.34 no.1
• /
• pp.24-33
• /
• 2013

To enhance the speech perception of hearing aid users in noisy environment, most hearing aid devices adopt various beamforming algorithms such as the first-order differential microphone (DM1) and the two-stage directional microphone (DM2) algorithms that maintain sounds from the direction of the interlocutor and reduce the ambient sounds from the other directions. However, these conventional algorithms represent poor directionality ability in low frequency area. Therefore, to enhance the speech perception of hearing aid uses in low frequency range, our group had suggested a fractional delay subtraction and integration (FDSI) algorithm and estimated its theoretical performance using computer simulation in previous article. In this study, we performed a KEMAR test in non-reverberant room that compares the performance of DM1, DM2, broadband beamforming (BBF), and proposed FDSI algorithms using several objective indices such as a signal-to-noise ratio (SNR) improvement, a segmental SNR (seg-SNR) improvement, a perceptual evaluation of speech quality (PESQ), and an Itakura-Saito measure (IS). Experimental results showed that the performance of the FDSI algorithm was -3.26-7.16 dB in SNR improvement, -1.94-5.41 dB in segSNR improvement, 1.49-2.79 in PESQ, and 0.79-3.59 in IS, which demonstrated that the FDSI algorithm showed the highest improvement of SNR and segSNR, and the lowest IS. We believe that the proposed FDSI algorithm has a potential as a beamformer for digital hearing aid devices.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.71-77
• /
• 2011

In this paper, we propose a conversational quality measurement (CQM) system for providing the objective QoS of high quality mobile VoIP voice telecommunication. For measuring the conversational quality, the VoIP telecommunication system is implemented in two smart phones connected with VoIP. The VoIP telecommunication system consists of echo cancellation, noise reduction, speech encoding/decoding, packet generation with RTP (Real-Time Protocol), jitter buffer control and POS (Play-out Schedule) with LC (loss Concealment). The CQM system is connected to a microphone and a speaker of each smart phone. The voice signal of each speaker is recorded and used to measure CE (Conversational Efficiency), CS (Conversational Symmetry), PESQ (Perceptual Evaluation of Speech Quality) and CE-CS-PESQ correlation. We prove the CQM system by measuring CE, CS and PESQ under various SNR, delay and loss due to IP network environment.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.47 no.4
• /
• pp.47-54
• /
• 2010

We propose a smart human-computer interface replacing conventional mouse interface. The interface is able to control cursor and command action with only hand performing without object. Four finger motions(left click, right click, hold, drag) for command action are enough to express all mouse function. Also we materialize cursor movement control using image processing. The measure what we use for inference is entropy of EMG signal, gaussian modeling and maximum likelihood estimation. In image processing for cursor control, we use color recognition to get the center point of finger tip from marker, and map the point onto cursor. Accuracy of finger movement inference is over 95% and cursor control works naturally without delay. we materialize whole system to check its performance and utility.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.141-149
• /
• 2013

IETF 6LoWPAN standard technique has been studied in IoT environment to support the IPv6 packet communication. 6LoWPAN protocol for transmission of packets mainly in the AODV routing protocol and a variety of extended techniques have been investigated. In particular, consisting of nodes with limited resources in a network error occurs when the 6LoWPAN reliable data transfer and fast routing method is needed. To this end, in this paper, we propose resilient routing protocol and extension of IETF LOAD algorithm, for optimal recovery path, More specifically, the optimal recovery path setup algorithm, signal flow, and detailed protocols for the verification of the reliability of packet transmission mathematical model is presented. The proposed protocol techniques to analyze the performance of the NS-3 performance through the simulation results that is end-to-end delay, throughput, packet delivery fraction and control packet overhead demonstrated excellence in comparison with existing LOAD.