• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.8
• /
• pp.3550-3566
• /
• 2020

As a widely used way to exfiltrate information, wireless covert channel (WCC) brings a serious threat to communication security, which enables the wireless communication process to bypass the authorized access control mechanism to disclose information. Unlike the covert channel on the network layer, wireless covert channels on the physical layer (WCC-P) is a new covert communication mode to implement and improve covert wireless communication. Existing WCC-P scheme modulates the secret message bits into the Gaussian noise, which is also called covert digital communication system based on the joint normal distribution (CJND). Finding the existence of this type of covert channel remains a challenging work due to its high undetectability. In this paper, we exploit the square autocorrelation coefficient (SAC) characteristic of the CJND signal to distinguish the covert communication from legitimate communication. We study the sharp increase of the SAC value when the offset is equal to the symbol length, which is caused by embedding secret information. Then, the SAC value of the measured sample is compared with the threshold value to determine whether the measured sample is CJND sample. When the signal-to-noise ratio reaches 20db, the detection accuracy can reach more than 90%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.7A
• /
• pp.735-740
• /
• 2004

When optical signal power of ONU differs from each other the requirements of an OLT receiver becomes strict and the stable operation of a total PON system can't be obtained. To solve this problem each ONU channel's signal power is measured at the OLT side and control signals to equalize them are generated and sent to each ONU. The proposed scheme is tested after implementation A digital APC circuit is proposed and tested so that it can start or stop LD operation without delay. It helps other ONU to transmit signals without interference and to reduce consuming power.

• Current Optics and Photonics
• /
• v.5 no.4
• /
• pp.384-390
• /
• 2021

This paper presents a wide-range tunable wavelength-locking technology based on optoelectronic oscillation (OEO) loops for optical fiber sensors and microwave photonics applications, explains the theoretical fundamentals of the design, and demonstrates a method for locking the relative wavelength differences between a leader semiconductor laser and its follower lasers. The input of the OEO loop in the proposed scheme (the relative wavelength difference) determines the radio-frequency (RF) signal frequency of the oscillation output, which is quantized into an injection current signal for feedback to control the wavelength drift of follower lasers so that they follow the wavelength change of the leader laser. The results from a 10-hour continuous experiment in a field environment show that the wavelength-locking accuracy reached ±0.38 GHz with an Allan deviation of 6.1 pm over 2 hours, and the wavelength jitter between the leader and follower lasers was suppressed within 0.01 nm, even though the test equipment was not isolated from vibrations and the temperature was not controlled. Moreover, the tunable range of wavelength locking was maintained from 10 to 17 nm for nonideal electrical devices with limited bandwidth.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.47 no.6
• /
• pp.28-39
• /
• 2010

The study aims at offering a solution to the problems of transmission delay and data throughput decrease as the number of contending On-Board Units (OBU) increases by applying CSMA medium access control protocol based upon IEEE 802.11p. In a competition-based medium, contention probability becomes high as OBU increases. In order to improve the performance of this medium access layer, the author proposes EDCA which a adaptive adjustment of the Contention Windows (CW) considering traffic density and data type. EDCA applies fixed values of Minimum Contention Window (CWmin) and Maximum Contention Window (CWmax) for each of four kinds of Access Categories (AC) for channel-specific service differentiation. EDCA does not guarantee the channel-specific features and network state whereas it guarantees inter-AC differentiation by classifying into traffic features. Thus it is not possible to actively respond to a contention caused by network congestion occurring in a short moment in channel. As a solution, CWminAS(CWmin Adaptation Scheme) and ACATICT(Adaptive Contention window Adjustment Technique based on Individual Class Traffic) are proposed as active CW control techniques. In previous researches, the contention probabilities for each value of AC were not examined or a single channel based AC value was considered. And the channel-specific demands of IEEE 802.11p and the corresponding contention probabilities were not reflected in the studies. The study considers the collision number of a previous service section and the current network congestion proposes a dynamic control technique ACCW(Adaptive Control of Contention windows in considering the WAVE situation) for CW of the next channel.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.75-82
• /
• 2016

Visible light communication (VLC) using LED lamps is suitable for implementing an indoor positioning system in an indoor environment where the global positioning system (GPS) signal does not reach. In this paper, we present an indoor positioning system for mobile robots using a VLC beacon and fuzzy rules. This system consists of an autonomous mobile robot, VLC modules, and device application software. Fuzzy rules are applied to plan the global and local paths along which the mobile robot navigates indoors. The VLC transmitter modules are attached to the wall or the ceiling as beacons to transmit their own location information. The variable pulse position modulation (VPPM) algorithm is used to transmit data, which is a new modulation scheme for VLC providing a dimming control mechanism for flicker-free optical communication. The mobile robot has a receiver module to receive the location information while performing its mission in the environment where VLC transmitters are deployed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.1
• /
• pp.36-41
• /
• 2011

Medical X-ray has been brought many changes according to the rapid development of high technology. Especially, for high-voltage generator which is the most important in X-ray generation the traditional way is to use high-voltage electric transformers primarily. However, since it is large and heavy and the ripple rate of DC high-voltage applied to X-ray tube is too big, it has a disadvantage of low X-ray production efficiency. To solve these problems, the studies about high-voltage power supply are now proceeding. At present, the high-voltage generator that generates high-voltage by making high frequency using inverter control circuit consisting of semiconductor device is mainly used. High-voltage generator using inverter has advantages in the diagnosis using X-ray including high performance with short-term use, miniaturization of power supply and ripple reduction. In this study, the X-ray high-voltage device with inverter type using pulse width modulation scheme to the control of tube voltage and tube current was designed and produced. For performance evaluation of produced device, the control signal analysis, irradiation dose change and beam quality depending on the load variation of tube voltage and tube current were evaluated.

• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.109-114
• /
• 2004

A new code and its decoding scheme are proposed. With this code, we can correct and detect the errors in communication systems. To limit the runlength of data 0 and augment the minimum density of data 1, a (15, 7) BCH code is modified and an overall parity bit is added. The proposed code is a (16, 7) block code which has the bit clock signal regeneration capability and high error control capability. It is proved that the runlength of data 0 is less than or equal to 7, the density of data 1 is greater than or equal to 1/8, and the minimum Hamming distance is 6. The decoding error probability, the error detection probability and the correct decoding probability are presented for the proposed code. It is shown that the proposed code has better error control capability than the conventional schemes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.8
• /
• pp.1528-1535
• /
• 1994

In this paper, a filtered-X LMS algorithm by new error path identification method is proposed for active noise control system. The proposed algorithm identifies accurately the error path transfer function using three microphones and the control of error signal through double loop scheme with on-line. In the computer simulation using the sinusoidal and the practical duct noise, the proposed algorithm reduces noise level about 29.1dB and 10.4dB, respectively. We can observe the improvement of about 0.5dB and 2.5dB in noise level compared with that obtained using the filtered-X LMS algorithm of Eriksson model.

• ETRI Journal
• /
• v.41 no.5
• /
• pp.648-657
• /
• 2019

A cluster topology was proposed with the assumption of zero noise to improve the performance of wireless body area networks (WBANs). However, in WBANs, the transmission power should be reduced as low as possible to avoid the effect of electromagnetic waves on the human body and to extend the lifetime of a battery. Therefore, in this work, we consider a bit error rate for a cluster-based WBAN and analyze the performance of the system while the transmission of sensors and cluster headers (CHs) is controlled. Moreover, a hierarchical topology is proposed for the cluster-based WBAN to further improve the throughput of the system; this proposed system is called as the hierarchical cluster WBAN. The hierarchical cluster WBAN is combined with a transmission control scheme, that is, complete control, spatial reuse superframe, to increase the throughput. The proposed system is analyzed and evaluated based on several factors of the system model, such as signal-to-noise ratio, number of clusters, and number of sensors. The calculation result indicates that the proposed hierarchical cluster WBAN outperforms the cluster-based WBAN in all analyzed scenarios.

• The KIPS Transactions:PartB
• /
• v.18B no.5
• /
• pp.249-254
• /
• 2011

FGS (fine granularity scalability) supporting scalability in MPEG-4 Part 2 is a scalable video coding scheme that provides bit-rate adaptation to varying network bandwidth thereby achieving of its optimal video quality. In this paper, we proposed FGS coding scheme which performs one more bit-plane coding for residue signal occured in the enhancement-layer of the basic FGS coding scheme. The experiment evaluated in terms of video quality scalability of the proposed FGS coding scheme by comparing with FGS coding scheme of the MPEG-4 verification model (VM-FGS). The comparison was conducted by analysis of PSNR values of three tested video sequences. The results showed that when using rate control algorithm VM5+, the proposed FGS coding scheme obtained Y, U, V PSNR of 0.4 dB, 9.4 dB, 9 dB averagely higher and when using fixed QP value 17, obtained Y, U, V PSNR of 4.61 dB, 20.21 dB, 16.56 dB averagely higher than the existing VM-FGS. From results, we found that the proposed FGS coding scheme has higher video quality scalability to be able to achieve video quality from minimum to maximum than VM-FGS.