• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2367-2372
• /
• 2015

One of various low-density parity-check(LDPC) codes that has been adopted in many communication standards due to its error correction ability is a quasi-cyclic LDPC(QC-LDPC) code, which leads to comparable decoder complexity. One of the main blocks in the QC-LCDC code decoder is a multi-size circular shifter(MSCS) that can perform various size rotation. The MSCS can be implemented with many structures, one of which is based on Banes network. The Benes network structure can perform the normal MSCS operation efficiently, but it cannot use the properties coming from specifications like rotation sizes. This paper proposesd a scheme where the Benes network structure can use the rotation size property with the modification of the control signal generation. The proposed scheme is applied to the MSCS of IEEE 802.16e WiMAX QC-LDPC decoder to reduce the number of MUXes and the critical path delay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12B
• /
• pp.1083-1096
• /
• 2008

This paper proposes an energy-aware path management scheme, so-called the TBP(Threshold based Back-Pressure) algorithm, which is designed for lifetime extension of the energy-constrained wireless sensor networks. With the goal of fair energy consumptions, we extensively utilize the available paths between the source and the sink nodes. The traffic distribution feature of the TBP algorithm operates in two scales; the local and the whole routing area. The threshold and the back-pressure signal are introduced for implementing those operations. It is noticeable that the TBP algorithm maintains the scalability by defining both the threshold and the back-pressure signal to have their meanings locally confined to one hop only. Throughout several experiments, we observe that the TBP algorithm enhances the network-wide energy distribution. which implies the extension of the network lifetime. Additionally, both the delay and the throughput outcomes show remarkable improvements. This shows that the energy-aware path control scheme holds the effects of the congestion control.

• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.1
• /
• pp.51-57
• /
• 2007

In this paper we introduce the concept of MPLS-based VPN and propose a scheme for providing VPN services in MPLS networks. Furthermore, we design the control components and the operational procedures and evaluated the performance of traditional VPN implementation methods and MPLS-based VPN. In this scheme it is possible to solve several problems that IP-based VPN pertains via the allocation of VPN ID and virtual space without tunneling, thereby providing effective VPN services. In other words, the MPLS-based VPN scheme uses MPLS networking technology together with the PSTN which can achieve a perfect segregation of user traffic on per-customer basis in a physical link and can guarantee high reliability and security levels. Specially, in the perspective of customers, it can save networking facilities installation and maintenance costs considerably. On the contrary, it possesses some shortcomings in that its deployment tends to be restricted within an ISP's network boundary and it is vulnerable to external security break-ins when going through public networks such as the Internet due to its lack of data encryption capability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.9
• /
• pp.1492-1512
• /
• 2011

Due to multiple hops, mobility and time-varying channel, supporting delay sensitive real-time traffic in wireless local area network-based (WLAN) mesh networks is a challenging task. In particular for real-time traffic subject to medium access control (MAC) layer control overhead, such as preamble, carrier sense waiting time and the random backoff period, the performance of real-time flows will be degraded greatly. In order to support real-time traffic, an efficient adaptive packet scheduling (APS) scheme is proposed, which aims to improve the system performance by guaranteeing inter-class, intra-class service differentiation and adaptively adjusting the packet length. APS classifies incoming packets by the IEEE 802.11e access class and then queued into a suitable buffer queue. APS employs strict priority service discipline for resource allocation among different service classes to achieve inter-class fairness. By estimating the received signal to interference plus noise ratio (SINR) per bit and current link condition, APS is able to calculate the optimized packet length with bi-dimensional markov MAC model to improve system performance. To achieve the fairness of intra-class, APS also takes maximum tolerable packet delay, transmission requests, and average allocation transmission into consideration to allocate transmission opportunity to the corresponding traffic. Detailed simulation results and comparison with IEEE 802.11e enhanced distributed channel access (EDCA) scheme show that the proposed APS scheme is able to effectively provide inter-class and intra-class differentiate services and improve QoS for real-time traffic in terms of throughput, end-to-end delay, packet loss rate and fairness.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.2
• /
• pp.92-99
• /
• 2014

The paper is related to smart maximum power system based on program logic. Especially, this system compares the total demand power with the target power by using the signal from the digital kilo watt meter. Based on the power information by the maximum power control equipment the consumed future power is anticipated. In addition, through consumed future power the controllable target power is set, and it applies on the maximum power control equipment. User or manager would control the load efficiently through the simple programming which could control load based on the control sequence and relay. To begin with the conventional maximum power control algorithm is surveyed, and the smart maximum power control system based on program logic is used, and the new algorithm from full load to proportion shut down is proposed by using PLC program. the validity of the proposed control scheme is investigated by both simulation results.

• Journal of Korean Society for Quality Management
• /
• v.33 no.3
• /
• pp.126-134
• /
• 2005

This paper proposes a selectively cumulative sum(S-CUSUM) control chart for detecting shifts in the process mean. The basic idea of the S-CUSUM chart is to accumulate previous samples selectively in order to increase the sensitivity. The S-CUSUM chart employs a threshold limit to determine whether to accumulate previous samples or not. Consecutive samples with control statistics out of the threshold limit are to be accumulated to calculate a standardized control statistic. If the control statistic falls within the threshold limit, only the next sample is to be used. During the whole sampling process, the S-CUSUM chart produces an 'out-of-control' signal either when any control statistic falls outside the control limit or when L -consecutive control statistics fall outside the threshold limit. The number L is a decision variable and is called a 'control length'. A Markov chain approach is employed to describe the S-CUSUM sampling process. Formulae for the steady state probabilities and the Average Run Length(ARL) during an in-control state are derived in closed forms. Some properties useful for designing statistical parameters are also derived and a statistical design procedure for the S-CUSUM chart is proposed. Comparative studies show that the proposed S-CUSUM chart is uniformly superior to the CUSUM chart or the Exponentially Weighted Moving Average(EWMA) chart with respect to the ARL performance.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.5
• /
• pp.55-63
• /
• 2013

In cognitive radio networks, acquirement of position information of primary user is very important to secondary network since localization information of primary users can be utilized for improving the spectrum efficiency of secondary network and for avoiding harmful interference to primary users by using proper power control. Among various location methods, Received Signal Strength (RSS)-based localization has been widely used for distance measurements in the location detection process despite its inherent inaccuracy because it can be easily implemented without any additional hardware cost. In the RSS-based localization, the distance is measured by the received signal strength, and distance error can be caused by many factors such as fading, shadowing and obstacle between two nodes. In the paper, therefore we propose a localization scheme based on estimation of path-loss exponent to localize the location of primary users more accurately. Through simulations, it is shown that the proposed scheme can provide less localization error and interference rate to primary users than other schemes.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1140-1142
• /
• 2002

This paper is proposed to position and speed control of interior permanent magnet synchronous motor(IPMSM) drive without mechanical sensor. The rotor position, which is an essential component of any vector control schemes, is calculated through the instantaneous stator flux position and an estimated flux value of rotating reference frame. A closed-loop state observer is implemented to compute the speed feedback signal. The validity of the proposed sensorless scheme is confirmed by simulation and its dynamic performance is examined in detail.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.338-347
• /
• 2015

The multi-carrier transmission signal in Multi-Carrier Code Division Multiple Access (MC-CDMA) has a high peak-to-average power ratio (PAPR), which results in nonlinear distortion and deteriorative system performance. An n-tuple selective mapping method is proposed to reduce the PAPR, in this paper. This method generates $2^n$ sequences of an original data sequence by adding n-tuple of n PAPR control bits to it followed by an interleaver and error-control code (ECC) to reduce its PAPR. The convolutional, Golay, and Hamming codes are used as ECCs in the proposed scheme. The proposed method uses different numbers of the n PAPR control bits to accomplish a noteworthy PAPR reduction and also avoids the need for a side-information transmission. The simulation results authenticate the effectiveness of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.480-483
• /
• 2004

This paper, we present the evaluation of outage probability on the SNR under the overlapped carrier allocation scheme in the reverse link with imperfect power control of a cellular CDMA system, which is base on using Gaussian approximation. In numerical results, the band limited pulse generated by square-root of raised consin pulse shaping filters (SRRC) of the transmitted signal is investigated and compared in conventional FD/CDMA and OC-CDMA of the outage probability. It will be also show that the outage probability can be improved by overlapping of carriers. We use error statistics to model the intra-cell interference and evaluate the impact of different mobiles velocity and number of resolvable paths on the system performance.