• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.190-201
• /
• 2015

This paper uses the switching function approach to present a simple state model of the Vienna-type rectifier. The approach introduces the relationship between the DC-link neutral point voltage and the AC side phase currents. A novel direct power control (DPC) strategy, which is based on the sliding mode control (SMC) for Vienna I rectifiers, is developed using the proposed power model in the stationary ${\alpha}-{\beta}$ reference frames. The SMC-based DPC methodology directly regulates instantaneous active and reactive powers without transforming to a synchronous rotating coordinate reference frame or a tracking phase angle of grid voltage. Moreover, the required rectifier control voltages are directly calculated by utilizing the non-linear SMC scheme. Theoretically, active and reactive power flows are controlled without ripple or cross coupling. Furthermore, the fixed-switching frequency is obtained by employing the simplified space vector modulation (SVM). SVM solves the complicated designing problem of the AC harmonic filter. The simplified SVM is based on the simplification of the space vector diagram of a three-level converter into that of a two-level converter. The dwelling time calculation and switching sequence selection are easily implemented like those in the conventional two-level rectifier. Replacing the current control loops with power control loops simplifies the system design and enhances the transient performance. The simulation models in MATLAB/Simulink and the digital signal processor-controlled 1.5 kW Vienna-type rectifier are used to verify the fast responses and robustness of the proposed control scheme.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.23-28
• /
• 2016

In this paper, we proposed the novel algorithm which controls the resolution of the HDMI(High Definition Multimedia Interface) by the channel estimation from WiFi-AP(Access Point) in the ISM(Industry-Science-Medical) band. The 2.4 and 5 GHz channel models are widely used since they have identical RF property as RSSI(Received Signal Strength Indication). Especially, the performance degradation of signal-transmission and streaming of WiFi will be occurred by the co-channel interference between AP(Access Point) and increased number of smart devices. Therefore, the optimization scheme of video format timing was designed by HDMI-CEC(Consumer Electronics Control) which considers the transmission speed of radio channel. The HDMI resolution, video quality of home-gateway and digital TV and the decision of PIP position can be maintained by the protocols between smart devices and DLNA(Digital Living Network Alliance) via proposed technique.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.10
• /
• pp.601-609
• /
• 2014

This paper proposes a resource allocation scheme suitable for D2D communications in multi-cell environment. In order to solve the inter-cell interference, the proposed scheme allocates the pre-assigned resource group and shares the information with neighbor cells. This paper also proposes a power control scheme for D2D communication to enhance the cell throughput. By the simulation results, the average SINR of the cellular uplink and D2D communication link are mostly higher than 10 dB when the proposed scheme is applied. On the other hand, with the inter-cell non-coordinated resource allocation scheme, the average SINR of the D2D communication link are decreased by 0 dB. In addition, the proposed scheme can enhance the cell throughput up to 8 % compared with the inter-cell non-coordinated resource allocation scheme.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.387-392
• /
• 2020

This paper proposes a flow-rate control system for industrial valves. Industrial valves are used in piping systems to control the flow rate and pressure. In general, valves used in pipelines are classified into globe valves, butterfly valves, and ball valves according to the shape. Motor, hydraulic, and pneumatic systems are used for operating valves. The flow meter should measure the flow rate when configuring the flow-rate control system. On the other hand, because the flow rate of the valve can be expressed by flow coefficient, a control scheme is proposed using the pressure deviation, which measures at the front and rear of the valve. The transfer function for the valve, according to the control input, was estimated using the signal compression method. Based on the induced transfer function, the disturbance observer was designed to improve the command following the performance of the valve stem. The performance of the proposed control method is compared with the flow-rate control result using the flow meter used.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.60-63
• /
• 1997

A new approach to the position sensor elimination of PM synchronous motor drives is presented in this study. Using the position sensing characteristics of PMSM itself, the actual rotor position as well as the machine speed can be estimated by adaptive flux observer and used as the feedback signal for the vector controlled PMSM drive. The adaptive speed estimation is achieved by model reference adaptive technique. The adaptive laws are derived by the Popov's hyperstability theory and the positivity concept. In order to verify the effectiveness of the proposed scheme, computer simulations are carried out for the actual parameters of a PM synchronous motor and the results well demonstrate that the proposed scheme provides a good estimation value of the rotor speed without mechanical sensor. It is also shown that the actual rotor position as well as the machine speed can be achieved under the variation of the magnet flux linkage. Since the flux linkages are estimated by the adaptive flux observer and used for the identification of the rotor speed, robust estimation of the rotor speed can be performed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.96.2-96
• /
• 2002

In this paper, a new method for the mixed image separation is presented using the independent component analysis, the innovation process, and the expectation-maximization. In general, the independent component analysis (ICA) is one of the widely used statistical signal processing scheme that represents the information from observations as a set of random variables in the form of linear combinations of another statistically independent component variables. In various useful applications, ICA provides a more meaningful representation of the data than the principal component analysis through the transformation of the data to be quasi-orthogonal to each other, which can be utilized in linear p...

• IEIE Transactions on Smart Processing and Computing
• /
• v.3 no.2
• /
• pp.83-87
• /
• 2014

This paper introduces a refined opportunistic interference alignment (OIA) technique that uses minimum mean square error (MMSE) detection at the receivers in multiple-input multiple-output multi-cell uplink networks. In the OIA scheme under consideration, each user performs the optimal transmit beamforming and power control to minimize the level of interference generated to the other-cell base stations, as in the conventional energy-efficient OIA. The result showed that owing to the enhanced receiver structure, the OIA scheme shows much higher sum-rates than those of the conventional OIA with zero-forcing detection for all signal-to-noise ratio regions.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.12
• /
• pp.894-902
• /
• 1988

In this paper, a method for the design of robust adaptive controller using the heuristic rules of industrial engineers is presented. This scheme works on the basis of heuristic rules and includes a supervisor, a system identifier and a detuner. The supervisor detects onsetting instability based on the analysis of the amplitude and the trend of error signal, also selects running controllers. Upon detecting instability, the controller is switched to a PID algorithm and run recursively until stability is restored. Simultaneously, new input / output data is gathered and the system identifier runs to get critical sensitivity (kc) and critical period(tc). Based on the new values(kc, tc), a GPC controller is redesigned and normal GPC is finally run. The algorithm described in this paper belongs to the supervised adaptive control category with a limited use of heuristic rules. Finally, we show the robust of this scheme by simulated example.

• Journal of the Optical Society of Korea
• /
• v.16 no.2
• /
• pp.107-114
• /
• 2012

In this paper, we propose a new modulation scheme called multi-coded variable pulse position modulation (MC-VPPM) for visible light communication systems. Two groups of signals (Pulse Width Modulation (PWM) and Pulse Position Modulation (PPM) groups) are multi-coded by orthogonal codes for transmitting data simultaneously. Then, each multi-level value of the multi-coded signal is converted to pulse width and position which results in not only an improved data rate, but also a processing gain in reception. In addition, we introduce average duty ratio and cyclic shift concepts in PWM through which dimming control for light illumination can be supported without any degradation in communication performance. Through simulation, we confirm that the proposed MC-VPPM shows a comparable BER curve and much greater achievable data rate than the conventional VPPM scheme using a visible light optical channel environment.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1096-1107
• /
• 2015

This paper presents a dynamic retry adaptation scheme for H.264 HD video, called DRAS.264, which dynamically adjusts the retry limits of frames at the medium access control (MAC) layer according to the impact those frames have on the streamed H.264 HD video. DRAS.264 is further improved with a bandwidth estimation technique, better prediction of packet delays, and expanded results covering multi-slice video. Our study is performed using the Open Evaluation Framework for Video Over Networks as a simulation environment for various congestion scenarios. Results show improvements in average peak signal-to-noise ratios of up to 4.45 dB for DRAS.264 in comparison to the default MAC layer operation. Furthermore, the ability of DRAS.264 to prioritize data of H.264 bitstreams reduces error propagation during video playback, leading to noticeable visual improvements.