• Communications for Statistical Applications and Methods
• /
• v.24 no.1
• /
• pp.1-13
• /
• 2017

This manuscript summarized advances in bootstrap methods for long-range dependent time series data. The stationary linear long-memory process is briefly described, which is a target process for bootstrap methodologies on time-domain and frequency-domain in this review. We illustrate time-domain bootstrap under long-range dependence, moving or non-overlapping block bootstraps, and the autoregressive-sieve bootstrap. In particular, block bootstrap methodologies need an adjustment factor for the distribution estimation of the sample mean in contrast to applications to weak dependent time processes. However, the autoregressive-sieve bootstrap does not need any other modification for application to long-memory. The frequency domain bootstrap for Whittle estimation is provided using parametric spectral density estimates because there is no current nonparametric spectral density estimation method using a kernel function for the linear long-range dependent time process.

• Journal of the Korean Ceramic Society
• /
• v.38 no.1
• /
• pp.1-8
• /
• 2001

선택적 가스분리를 위한 분자체탄소(Molecular Sieve Carbon: MSC)로서의 활용을 위해 제조된 활성탄소섬유의 흡착능과 분자체 특성이 다양한 분자크기를 갖는 가스 흡착실험을 통해 조사되었다. 각 활성화 조건별 세공크기분포와 세공발달 전개과정을 유추함으로서, 세공크기분포의 조절이 가능하게 되었으며 활성탄소섬유의 분자체 탄소로서 활용을 용이하게 할 수 있었다. 800, 85$0^{\circ}C$의 온도로 수증기에 의해 활성화한 활성탄소섬유의 경우 burn-off가 각각 50, 40% 정도를 가진 활성탄소섬유가 비교적 작은 분자크기(0.3~0.4nm)의 흡착질에 대한 분자체 특성을 나타냈다. 또한, 다양한 분자크기의 흡착질을 포함하는 혼합가스의 유속과 흡착온도의 조절로서 원하는 흡착질의 선택적 분리를 위해 활성탄소섬유가 갖는 분자체 특성 향상을 보였다.

• The Journal of Engineering Research
• /
• v.2 no.1
• /
• pp.147-149
• /
• 1997

Nirogen dioxide is rapidly converted to nitric oxide by the water absortbed on a Linde Molecular Sieve column. The resultant wave form is indistinguishable from that of pure nitric oxide introduced to the column. Thus, by conversion to the low boiling nitric oxide, the complication of oxidation of organic partitioning liquids is obviated.

• Korean Journal of Materials Research
• /
• v.14 no.2
• /
• pp.157-162
• /
• 2004

The object of this research is to develop a carbon molecular sieve(below CMS) which can separate selectively to convert mixture gases spout at waste landfill into fuel. And this research is meaningful from the viewpoint of a quality improvement of CH$_4$ gas and an utilization of by-product. CMS was prepared using coconut shell powder as starting material and the effects of activators, temperature and modifier on the reaction were investigated in this research. Also, pore diameter, surface area of CMS and adsorption rate were measured and studied by cahn balance and ASAP2010. Its specific surface area and pore distribution were controlled easily at 800^{\circ}C and adsorption rate was very good. The CMS prepared in this research is shown to be able to separate landfill gases very effectively.

• The Korean Journal of Mycology
• /
• v.27 no.4 s.91
• /
• pp.289-292
• /
• 1999

We investigated the isolation method of mushroom infesting pests, Lycoriella mali, Coboldia fuscipes, Histiostoma sp. from mushroom-growing compost. Sugar solution of different densities (0, 10, 20, 30, 40, 50%) was tested to provide a means of seperating mushroom pests from the compost media. Thus, 40% sugar solution was suitable for isolation. The sieve size to entrap the pests was $30{\sim}140$ mesh; Lycoriella mali was trappped mainly $30{\sim}65$ mesh sieve, Coboldia fuscipes was caught mainly $30{\sim}100$ mesh sieve, Histiostoma sp. was trapped mainly $65{\sim}140$ mesh sieve. An isolation procedure was as follows; The infested compost was disintegrated in water and poured onto a set of 16, 30, 80, 140-mesh sieve. The material caught in the sieve is added in 40% sugar solution and then most compost particle were massed at the bottom while the supernatant contains mushroom pests. The upperlayer material was poured into a Seperatory funnel and the sediment at the bottom is drained off. The remaining material are washed off examination dish for study.

• Proceedings of the Membrane Society of Korea Conference
• /
• 2004.05a
• /
• pp.183-186
• /
• 2004

Nano particles-containing CMS membranes were prepared by pyrolysis of polyimides dispersed uniformly with precursors and their gas separation performances were examined, to elucidate the permeation mechanism and to further improve the gas separation performance. Consequently, it was suggested that the separation performance could be controlled by doping nano-particles in the CMS membranes, and that optimization of various factors, such as the size, content, and dispersion state of the nano particles would contribute for further improvement of the gas separation performance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.8 no.4
• /
• pp.473-483
• /
• 1996

To protect the ozone layer, R22 will be replaced with HFCs. R407C is a leading candidate as alternative refrigerant for air conditioner due to its similar thermodynamic characteristics with R22. In replacing R22 with R407C, the compatibility with lubricating oil is of major concern. Polyol ester (POE) oil among the synthetic oils is considered to be the best lubricant for use with R407C because of good electrical properties and miscibility. However, lubricating ability of mixture of R407C/POE oil is lower than that of R22/mineral oil due to the production of acid by hydrolysis which causes corrosive wear. Therefore, to minimize water content, it is needed to develop a molecular sieve desiccant which is compatible with R407C and ester oil. This paper discusses (1) the change of properties of POE oil when current molecular seive is used, (2) the effects of POE oils and additives on durability of compressor. Through compressor life test and bench wear test, it was found that inadequate use of POE oils and additives may promote the deteriation of molecular sieve, resulting in decrease of durability of compressor.

• KSBB Journal
• /
• v.30 no.6
• /
• pp.332-338
• /
• 2015

The objective of this study was designed to determine the possibility of bioethanol production from wasted medium density fiberboard (wMDF). We were investigated the enzymatic saccharification characteristics using the enzyme (Cellic CTec3) after pretreatment with sodium chlorite. According to the component analysis results, the lignin contents before and after the pretreatment of wMDF (milling using sieve size of $1,000{\mu}m$) was significantly reduced from 31.13% to 4.11%. Therefore, delignification ratio of pretreated wMDF was found to be up to about 87-89% depending on the sieve size. And we were tested to compare the saccharification ratio according to the sieve size of wMDF ($1,000{\mu}m$, $200{\mu}m$), but it was no significance depending on the sieve size. When enzyme dosage was 5% based on the substrate concentration, enzymatic saccharification ratio was obtained up to 70% by maintaining at $50^{\circ}C$ for 72 hours. We could made the substrate concentration of pretreated wMDF ($1,000{\mu}m$) up to 12% and then enzymatic saccharification ratio was 76.8%, also contents of glucose and xylose were analyzed to 77,750 and 14,637 mg/L, respectively.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.3
• /
• pp.4171-4183
• /
• 1976

This study is to investigate the effect of some physical properties of soil on the compaction. The compaction effect depends upon various factors such as soil type, moisture content, gradation and compaction energy. In this study, with steady compaction energy, the relationships between maximum dry density and moisture content, gradation and consistency were analyzed by soil types. Some results obtained in this study are summarized as follows 1. Generally, the coarser the grain size, the bigger is the maximum dry density and the smaller is the optimum moisture content and its moisture-dry denisty curve is relatively steep. The finner the grain size, the smaller is the max. dry density and the bigger is the opt. moisture content and its moisture-dry density curve is less steep. 2. The relationship between max. dry density (${\gamma}$dmax) and opt. moisture content, void ratio, clay content, percent passing of No. 200 sieve, liquid limit and plastic limit can be represented by the equation ${\gamma}$dmax =ao+a1X(a0>0, a1<0) 3. The relationship between opt. moisture content (Wopt) and clay content, percent passing of No. 200 sieve, liquid limit and plastic limit can be represented by the equation Wopt=a0+a1X(a0>0, al>0). 4. The fact that maximum dry density of the compacted soil is decreased with the increase of the optimum moisture content in any types of soil tested, and the fact that optimum moisture content can be positively correlated with clay content, percent passing of No. 200 sieve, liquid limit and plastic limit of the soil, lead to the conclusion that clay content, percent passing of No. 200 sieve, liquid limit and plastic limit of the soil are direct factors in reduction of the maximum dry density of engineering soil.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10C
• /
• pp.614-620
• /
• 2011

RSA, the most commonly used public-key cryptosystem, is based on the difficulty of factoring very large integers. The fastest known factoring algorithm is the Number Field Sieve(NFS). NFS first chooses two polynomials having common root modulo N and consists of the following four major steps; 1. Polynomial Selection 2. Sieving 3. Matrix 4. Square Root, of which the most time consuming step is the Sieving step. However, in recent years, the importance of the Polynomial Selection step has been studied widely, because one can save a lot of time and memory in sieving and matrix step if one chooses optimal polynomial for NFS. One of the ideal ways of choosing sieving polynomial is to choose two polynomials with same degree. Montgomery proposed the method of selecting two (nonlinear) quadratic sieving polynomials. We proposed two cubic polynomials using 5-term geometric progression.