• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.474-483
• /
• 2000

In this paper, the planar LTS and Vibaldi antenna operating at 28 GHz for LMDS is optimized by finite difference time domain(FDTD) method and then fabricated and measured. We designed LTS and Vivaldi antenna with corrugation structure for reducing sidelobe, then these antenna are optimized by FDTD, and then fabricated and measured. In a results of the measured values, sidelobe level of LTS and Vivaldi antenna with corrugation structure is 4 dB lower than that of LTS and Vivaldi antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.199-205
• /
• 2004

There are many antenna array errors. They will distort the array beam pattern and result in an increased sidelobe level. A calibration technique is proposed for correcting the antenna array errors such as mutual coupling and unequal feeder characteristics. These are modeled as a matrix representing the interaction between the radiating elements. The matrix is estimated from the measured array response vectors. The antenna array errors are corrected by modifying the beamforming weight vector. It is verified by the electromagnetic simulation and experiment that the proposed technique reduces the sidelobe level and increases the antenna gain.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.3
• /
• pp.113-119
• /
• 1998

In this paper, the error sidelobe level and signal to noise loss from the numerical analysis using the modelling of quadrature coherent detector in the case that the channel imbalance and with local oscillator leakage is considered. From the numerical results, the error sidelobe level and signal to noise loss that with the gain and phase imbalance(0.8(dB)J5(dog)) is (-21.322[dB], -0.0071[dB]), (-11.6839[dB], -0.0059[dB]) in the case that the channel imbalance and with local oscillator leakage is considered.

• Journal of electromagnetic engineering and science
• /
• v.13 no.4
• /
• pp.251-258
• /
• 2013

A procedure for antenna parameter selections is proposed that considers the relationships between synthetic aperture radar performance and the antenna parameters of a parabola-type reflector antenna with a central flat dish. The effects of a central dish designed for weight reduction on the antenna beam pattern are also quantitatively analyzed using commercially available software based on the physical optics algorithm. The results of the theoretical analysis and simulation predict that a larger size of the central dish results in an increase in the sidelobe level, which is the reason for the increase in two important ambiguities, such as range ambiguity ratio (RAR) and azimuth ambiguity ratio (AAR). The dependence of RAR and AAR on Pulse repetition frequency is also analyzed and discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.1
• /
• pp.39-44
• /
• 1984

Three types of parabolic antenna to reduce the sidelobes and backlobe are compared to determine the best suppressive effect under same conditions which are side rim loading parabilic antenna, flanged prabolic antenna. The hooded parabolic antenna adhered polyurethan form impregnated carbon powder in shows the best shape of suppressed the side back lobes that is 5 to 10 dB suppression of sidelobe and 15dB suppression of back lobe for E-plane.

• ETRI Journal
• /
• v.26 no.5
• /
• pp.467-474
• /
• 2004

In a High Altitude Platform (HAP) cellular communications network, each cell may be served by a dedicated spot-beam antenna. The antennas' beam properties and their spatial overlap control the co-channel interference. In prior literature, radiation patterns have been approximated by a main lobe followed by a constant sidelobe floor. A network of 121 cells has been studied and the method is here extended to the use of more realistic radiation patterns based on the theoretical aperture antenna patterns. This allows for the comparison of the effect of different aperture field tapers, which lead to reduced sidelobe levels and hence higher system capacity but also a more massive antenna payload.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.7
• /
• pp.576-579
• /
• 2017

Due to the existence of flash lobe caused by the radome structure, a radar return in general contains clutter component added to target echo. Unlike jammer, clutter is apt to simultaneously coexist with target echo, which hinders a monopulse radar from estimating the angle difference between target echo direction and radar steering direction. In this paper, we propose a clutter estimation algorithm applicable to generalized sidelobe canceller(GSC) based monopulse radar. We show that clutter estimation can be achieved via iterative process of the orthogonal projections. Through simulations, the proposed GSC-based system combined with the clutter estimation can outperform the conventional monopulse system in terms of target angle estimation.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.2
• /
• pp.63-70
• /
• 1996

In this paper, we propose the low sldelobe digital doppler filter bank design algorithm which is practically applicable to coherent radar equipment in complex air-defense system. Using the proposed algorithm, we can obtain a digital doppler filter bank of lower peak sidelobe level and higher clutter suppression capability. In this method, it is possible to achieve higher target-detectability without loss of Target SNR. The proposed algorithms are verified by simulations and experiments.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.4
• /
• pp.23-30
• /
• 1999

In this study, we propose a new optimization algorithm for a withdrawal weighted SAW transversal filter to satisfy given, specifications such as bandwidth, ripple, insertion loss, and sidelobe rejection level. An analysis tool for the withdrawal weighted filter has been produced by means of the delta function model, and has been applied to the design of a filter consisting of an uniform input IDT and a withdrawal weighted output IDT. This optimization algorithm consists of three routines, which eventually determines eight design parameters to satisfy the performance specifications. At the first step, the number of input and output IDT fingers and their geometrical size are determined by the insertion loss specification. At the next step, the bandwidth is controlled by the change of the IDT finger position. Finally, the sidelobe rejection level is modified through the add/skip technique of IDT fingers. The algorithm in this paper is distinct from conventional techniques in that it can simultaneously consider all the specifications such as bandwidth, ripple, sidelobe rejection level and insertion loss, and optimize the geometry of the withdrawal weighted SAW filter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.12
• /
• pp.999-1002
• /
• 2017

For a target echo containing interference, it is very difficult to improve the performance of a monopulse radar with spatial domain processing, because the statistical property of interference cannot be exclusively obtained. This paper proposes a monopulse system that has a generalized sidelobe canceller(GSC) filter-based time domain processor as a preprocessor prior to conventional monopulse spatial processing. We analytically show the procedure of time-space signal processing running in the system, and assess its performance through simulation. In particular, the performance dependence on the number of taps in the main channel filter and the estimation error in Doppler frequency are assessed by comparison with those of existing systems.