• Journal of Forest and Environmental Science
• /
• v.28 no.4
• /
• pp.268-277
• /
• 2012

Among the domestic softwoods, technical value of Pinus koraiensis small diameter logs which have comparatively low applicability was evaluated and sensitive characteristics and physical characteristics were investigated and analyzed for examining if it can be utilized as the interior decoration material. For the sensitive characteristics of Pinus koraiensis, wood figure, wood grain, wood color and odor were evaluated and for the physical characteristics, growth-ring width and latewood percentage, abrasion, density, shrinkage, swelling, absorption, roughness and hardness were evaluated. Then, the possibility to be developed as the interior decoration material was found. As the result of evaluating sensitive characteristics and physical characteristics of domestic Pinus koraiensis, wood figure, wood grain, color and scent clearly were judged to have excellent visual factor as the interior decoration material. And, physical characteristics were also judged to be excellent, so it is judged to be developed as the interior decoration material. Therefore, as the result of various forms of design pattern with domestic Pinus koraiensis small diameter logs, several patterns of interior decoration can be developed by characteristics of each side and colors of heartwood and sapwood. And, in the future, it can be applied to furniture design or interior decoration material for the proper use. Especially, it is considered to contribute to wood applying industry through the study on the quality of domestic small diameter logs which have low applicability.

• Journal of the Korean Wood Science and Technology
• /
• v.24 no.2
• /
• pp.55-60
• /
• 1996

Tripitaka Koreana were made during Coryo Dynasty from 1236 to 1251 A.D. Buddhist scriptures were engraved on 81.340 wooden plates. Some plates were varnished with Rhus lacquer, but most of them were uncoated. Macroscopically, most of the plates appeared intact due to the storage in a well-ventilated wooden house. Because, they were irregularly used for printings with ink, it can be assumed that they were repeatedly exposed to ink-water and drying processes. The present were made to examine the changes of wood cell structures occurred during long-term aging deterioration processes in these dry archaeological wooden plates. Light, scanning and transmission electron microscopes were employed for this study. Wedge-shaped cracks and delamilations were found from the lumen side toward the compound middle lamellae and they progressed toward primary or secondary walls. A large amount of hypae in vessels and the degradation of vessel-ray pit walls by the fungal hyphae were observed. When compared to the recent wood, the birefringence of wood fibers was considerably lower or completly disappeared, suggesting the degradation of crystalline cellulose in these wood samples. The degradation of the cell wall could be also revealed the calculation of crystallinity with X-ray diffraction and the size of crystalline region was estimated.

• Journal of the Korean Home Economics Association
• /
• v.24 no.3
• /
• pp.11-18
• /
• 1986

The height of pillow was investigated from the ergonomics standpoint. The main concern of this research was to investigated the appropriate height of the pillow in lying on one's side. The infestigation in this study was administered to a sample of forty men who were similar to Korean standard body-build. The experiment was conducted under the awakening state. The experimental method was performed using ; 1) Sensuous test 2)Electromyogram survey 3) X-ray observation Sensuous test was performed using both a plain wood board and a slope wood board by jack to objectify. RESULTS : 1) By sensuous test, the height of pillow for the most comfortable state turned up 9.4±1.1cm in lying on one's side. 2) By electromyogram survey and X-ray observation, the numerical value was substantially confirmed well-grounded physiologically and anatomically. Ihope this research will be useful to establishing the suitable height of pillow for Korean.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.3
• /
• pp.29-36
• /
• 2018

In this study, the moisture contents of four Hanoks have been monitored and the results were analyzed. Murujeong and Ongojae were built by traditional construction method and material, and Jeeshinjae and Hwakyeongdang were built by modernized construction method and material. Hwakyeongdang was monitored about 2 years and 9 months and the other three Hanoks were monitored about 4 years and 2 months. The surface moisture contents were measured by the non-destructive electronic resistant type moisture content meter. The measured moisture contents were affected by the orientation to the sun, wood type, temperature and relative humidity. The columns on the northern side and lumber showed more moisture contents than those of the southern side and glue-laminated wood. The moisture contents and relative humidity showed proportional relationship. The moisture contents of all four monitored Hanoks existed proper range by and large.

• Advances in Computational Design
• /
• v.4 no.3
• /
• pp.251-272
• /
• 2019

This study performed lateral load testing on seventeen wood wall frames in two sections. Section one included eight tests studying structural foam sheathing of shear walls subjected to monotonic loads following the ASTM E564 test method. In this section, the wood frame was sheathed with four different types of structural foam sheathing on one side and gypsum wallboard (GWB) on the opposite side of the wall frame, with Simpson HDQ8 hold down anchors at the terminal studs. Section two included nine tests studying wall constructed with oriented strand board (OSB) only on one side of the wall frame subjected to gradually applied monotonic loads. Three of the OSB walls were tied to the baseplate with Simpson LSTA 9 tie on each stud. From the test results for Section one; the monotonic tests showed an 11 to 27 percent reduction in capacity from the published design values and for Section two; doubling baseplates, reducing anchor bolt spacing, using bearing plate washers and LSTA 9 ties effectively improved the OSB wall capacity. In comparison of sections one and two, it is expected the walls with structural foam sheathing without hold downs and GWB have a lower wall capacity as hold down and GWB improved the capacity.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.64-72
• /
• 2007

The biodeterioration behaviors of square post to support the wooden printing blocks Shelves in the Janggeongpanjeon were investigated according to the positions and parts of square post, and environmental conditions. It was found that a high differences of deterioration in the progressing levels of wood decay, according to the positions and parts of square post, and environmental conditions. The decay levels were very high and still progressing in the contacted areas with stone foundation which are about up to 50 cm above it. In the decay type, white rot fungi was mainly affected in the inside of building which mainly made of softwood. The decay in the square posts to support the wooden printing block shelves inside of building was worse in the rear side, compared to front side. The insects was not found in most of square posts excluding the post which was neighboring at the infected round column by insect.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.34-64
• /
• 1989

Corner block with anchor bolt(CBA) joint method used in knock-down type table furniture manufacturing can reduce the packing and transporting cost. Unfortunately. it also has the disastrous defect to be loosend and unstable during the service life mainly due to fatigue and creep(repeated and prolonged loading). So 22 joint groups constructed were tested to evaluate the effect of some design factors related to the size of side rail(apron). block attachment to side rail. and the number of anchor bolt as well as the effect of the type of corner block(mitered type vs. rectangular type) Usable strength from the stiffness coefficients of each joint group were analysed with SPSS /PC+ and described as the criteria of CBA joint construction. The conclusions were as follows: The height of side rail(50, 75 and 100 mm) and the addition of polyvinyl acetate(PVAc) emulsion in the corner block attactment to side rail had the effect on raising the usable strength of CBA joint with remarkable high significance. And the effect of 2 - anchor bolts was also superior to that of 1 - bolt significantly. However. the thickness of side rail(22 mm vs. 25 mm) had no effect on the strengthening the table joint rigidity. Mitered type corner block joint appeared to he recommendable for CBA jointed table construction rather than the rectangular type one regardless of the method of block attachment to side rail. The best result identified from Duncan's multiple comparison was in the construction with 25 mm thick and 100 mm height of side rail fastened using 2 - anchor bolts in mitered type corner block. But it would be reasonable to use 22 mm thick & 75 mm high side rail and mitered corner block with PVAc emulsion & 2 bolts considering the productivity and production cost down in the MDF furniture manufacturing industries.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.2
• /
• pp.166-177
• /
• 2018

Plant essential oils are defined as fragrant volatile oils extracted from leaves, stems, fruits, flowers, and roots of a plant. Such oils are composed of multiple components and multiple functions. By accumulation of inductive information, various plant essential oils have been studied for using in therapeutic medicine for various diseases. Despite of the apparent advantages of essential oils as a source of therapeutic medicines, plant essential oils have many limitations, including cytotoxic side effects. Therefore, it is necessary to evaluate the toxicity and the mechanisms of cytotoxicity of such oils. In this study, we evaluated the cytotoxicity to human-derived cell lines of 10 plant essential oils provided by National Institute of Forest Science (i.e., Larix kaempferi; Abies holophylla; Zanthoxylum ailanthoides; Pinus parviflora; Tsuga sieboldti; Chamaecyparis pisifera; Cryptomeria japonica; Pinus densiflora; Illicium anisatum; Pinus thunbergii). Cytotoxicity evaluations were accomplished by using CCK-assays and PCR-based cytotoxicity-related marker gene analyses with A549 cell line, and the Detroit551 cell line which are lung and skin cell line. The genes were analyzed included caspase-3 has a role in cell apoptosis, and the other cyclinA, cyclinB, cyclinD, and cyclinE regulated cell cycling for the cell proliferation. By examining the five cytotoxicity-related marker genes by performing real-time PCR and examined the cytostatic gene regulation associated with the various essential oils. The results of this study showed that the degree of cytotoxicity and the cytostatic gene regulation which could give precious information for using the plant essential oil for the clinical usages.

• Journal of the Korean housing association
• /
• v.18 no.2
• /
• pp.65-74
• /
• 2007

The study analyzes the remodeling characteristics of the four different types of secondary kitchens in apartment house based on their floor plans. The secondary kitchens are categorized into side placement, back placement, back placement with extensions on both sides, and back placement with an extension on a single side. The twelve apartment complexes in Ulsan were selected so that they may all consist each of the four types, and answered the survey. The classified traits of secondary kitchen were examined based on the characteristics of floor plan and remodeling. Side placement and back placement with extensions on both sides mostly used glass hinged doors. Back placement and back placement with a single side extension used glass sliding doors. It was found that the majority of the floor materials consisted of both wood and tiles, except for side placements, where only tiles were used. The sizes of the back placements with both and single side extensions were the largest. The side and back placements were rarely renovated, however, back placements with both and single side extensions went through massive remodeling.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.2 no.1
• /
• pp.39-44
• /
• 2003

In the present industry, there are necessary to cut not only iron metals but also non-ferrous metals such as aluminum, brass, plastic and wood(Paulownia) therefore it had been made the studies of non-ferrous metals by many scientists. The purpose of this study is to conduct the basic experiment about influencing of the feedrate adjustment and the change of the side rake angle at turning of non-ferrous metals. As the results, the surface roughnesses and Cutting force adjustments were on the decrease with a side-rake angle and feedrate diminution in the case of the plastic, brass, aluminum, and paulownia.