• 한국철도학회논문집
• /
• 제14권6호
• /
• pp.477-483
• /
• 2011

본 논문에서는 고속철도 차량의 소음원을 측정 및 분석하는데 활용하기 위한 마이크로폰 어레이를 설계 및 제작하여 그 활용성을 검증하는 연구를 수행하였다. 우선 다수의 마이크로폰에서 측정된 신호를 바탕으로 음원의 위치 및 방사 형태를 구현하는데 널리 사용되고 있는 지연-합 빔형성 방법이 고려되었으며, 빔 패턴에 대한 이론과 가상 음원에 대한 이론이 소개되었다. 또한 고속철도 음원을 도출하기 위한 요구사항에 만족하는 마이크로폰 어레이의 형상을 설계하기 위한 분석을 수행하여 96채널 마이크로폰 어레이 형상을 설계하였다. 설계된 마이크로폰 어레이의 실제 시험을 통해서 성능을 분석하였으며, 300km/h대로 주행하는 고속열차 차량에 적용하여 본 논문에서 구현한 마이크로폰 어레이의 활용가능성을 확인하였다.

• 한국전자파학회논문지
• /
• 제13권8호
• /
• pp.827-833
• /
• 2002

본 논문에서는 Chebyshev 다항식을 이용한 병렬급전 구조를 가진 LMDS(Local Multipoint Distribution Service) 수신용 마이크로 스트립 배열 안테나를 제안하였다. Chebyshev 다항식을 이용한 병렬 급전 구조 마이크로스트립 배열 안테나의 설계를 위하여 Chebyshev 다항식을 제시하였고, LMDS 수신을 위해 24~26 GHz 주파수 대역 8$\times$8 배열 안테나를 제시된 배열이론에 따라 설계하였다. 제작된 8$\times$8 배열 안테나의 이득은 23.5 dBi, 대역폭 1.2 GHz, 중심 주파수 24.96 GHz, 삽입손실 -29.15 dB의 측정결과를 얻었다.

• Journal of electromagnetic engineering and science
• /
• 제16권2호
• /
• pp.134-142
• /
• 2016

This paper proposes a technique for improving the conventional conical horn antenna for the X-band frequency using metamaterial on a wire medium structure. The main idea of this research is the application of the wire medium metamaterial to the conical horn's aperture for the enhancement of the horn's gain; this is done without changing the antenna's dimensions. The results show that the wire medium structure can increase the gain of a conventional conical horn antenna from approximately 17.7 dB to 20.9 dB (an increase of approximately 3.2 dB). A prototype antenna was fabricated, and its fundamental parameters including its reflection coefficient ($S_{11}$), radiation patterns, and directive gain were measured. The simulated and measured results were very good. The wire medium structure of the proposed antenna improved the radiation pattern, enhanced the directivity, increased the gain, and reduced the side lobe level using a simple integrated wire medium structure.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권9호
• /
• pp.417-422
• /
• 2002

ZnO thin films were deposited on various substrates, such as Si-(111), SiO$_2$(5000 $\AA$ by thermal CVD)/Si-(100), and SiO$_2$(2000 $\AA$ by RF sputtering)/Si-(100). The (002)-orientation, surface morphology and roughness, and electrical resistivity of deposited films were measured and compared in terms of substrate. Surface acoustic wave(SAW) filters with a multilayered configuration of IDT/ZnO/SiO$_2$/Si were also fabricated and the IDT was obtained using a lift-off method. From the frequency-response characteristics of fabricated devices, the insertion loss and side-lobe rejection were estimated. The experimental results showed that the (002)-oriented growth nature of ZnO films, which played a crucial role of determining the characteristic of SAW device, was strong1y dependent upon the SiO$_2$buffer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 센서 박막재료 반도체 세라믹
• /
• pp.141-144
• /
• 2003

This study proposes ZnO thin film as a piezoelectric material for SAW (surface acoustic wave) filter. The ZnO thin film with thickness $2.6{\mu}m$ was deposited (0001)-oriented sapphire by RF magnetron sputtering technique. IDTs (inter-digital transducers) electrodes were patterned upon SAW filter mask with solid finger structure unapodized using lift-off method on ZnO piezoelectric thin film. SAW propagation velocity was measured with the center frequency by HP 8753C network analyzer. A fabricated ZnO SAW filter exhibited a high propagation velocity of 5433 $^m/s$ and relatively insertion loss of -53.391dB at $\lambda=80{\mu}m$. The side-lobe attenuation of the center frequency was about 17dB. When the wavelength was $80{\mu}m$ $(\lambda/4=20{\mu}m)$, the center frequency was 67.907 MHz. $k^2$ (electromechanical coupling coefficient) was 15.84 %.

• Journal of Chest Surgery
• /
• 제27권5호
• /
• pp.413-417
• /
• 1994

Adenoid cystic carcinoma usually grows in the trachea or near its bifurcation and causes obstruction of the air way. We recently experienced a 33 year-old male patient who had adenoid cystic carcinoma in the left main bronchus with the chief complaint of productive cough. On the bronchoscopy, the mass obstructed the left main bronchus completely and had nodularity and increased vascularity.The trachea was shifted to the left side and the lower lobe of the left lung was atelectatic on chest X-ray and computed axial tomogram.He underwent left tracheal sleeve pneumonectomy and lymph node dissection through bilateral thoracotomy. At first,we attempted left tracheal sleeve pneumonectomy through the left thoracotomy,however, it was very difficult to perform carinoplastic procedure after sleeve resection of 2.5cm of distal trachea and 1cm of proximal right main bronchus including whole left lung because of poor operative field and difficulty in the anastomosis of the right main bronchus to the distal end of the trachea without tension.Therefore after radical resection of the left lung we made right thoracotomy,through which we could anastomosed the distal trachea and right main bronchus with 4-0 PDS interrupted suture after mobilization of the right hilum without difficulty. The tumor was confirmed to be adenoid cystic carcinoma with metastasis to subcarinal lymph node histopathologically. Postoperative course was uneventful but he needed two bronchoscopic procedure to clear distal airway of the retained bronchial secretion. He was discharged at 14 days after operation with complete recovery.

• 한국광학회지
• /
• 제14권6호
• /
• pp.657-662
• /
• 2003

SiO$_2$ 박막형 음향파 도파로와 Hamming 가중결합 구조를 이용하여 1550nm 파장대역에서 동작하는 음향광학형 2${\times}$2 Ti:LiNbO$_3$ 광 삽입/분기 멀티플렉서를 구현하였다 제안된 소자는 두 개의 입ㆍ출력 광도파로, 두 개의 편광모드분리기와 음향광학형 편광모드 변환기로 구성되었다. 제작된 소자의 삽입손실은 -7 ㏈로 측정되었으며, ∼32 ㎽ RF 구동 파워에서 -l9 ㏈ 의 부 모드 레벨이 측정되었다. 삽입/분기 동작 특성을 확인하였으며, 3 ㏈ 통과대역폭과 tuning rate는 ∼l.5 mm, 8.1 nm/MHz 로 각각 측정되었다.

• Current Optics and Photonics
• /
• 제2권2호
• /
• pp.147-152
• /
• 2018

We propose a novel bi-focal metallic Fresnel zone plate (MFZP) with shallow depth-of-field (DOF) characteristics. We design the specific annular slit patterns, exploiting the phase-selection-rule method along with the particle swarm optimization algorithm, which we have recently proposed. We numerically investigate the novel characteristics of the bi-focal MFZP in comparison with those of another bi-focal MFZP having equivalent functionality but designed by the conventional multi-zone method. We verify that whilst both bi-focal MFZPs can produce dual focal spots at $15{\mu}m$ and $25{\mu}m$ away from the MFZP plane, the former exhibits characteristics superior to those of the latter from the viewpoint of axial resolution, including the axial side lobe suppression and axial DOF shallowness. We expect the proposed bi-focal MFZP can readily be fabricated with electron-beam evaporation and focused-ion-beam processes and further be exploited for various applications, such as laser micro-machining, optical trapping, biochemical sensing, confocal sensing, etc.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 춘계학술대회
• /
• pp.605-608
• /
• 2009

이동 목표물 및 기상 현상 등의 원격탐지를 위한 레이다 시스템에서는 수신되는 전자파 반사 신호로부터 유용한 정보를 추출하기 위하여 각 거리별로 도플러 스펙트럼의 추정이 필요할 수 있다. 그러나 이제까지 일반적으로 적용되어졌던 FFT 주파수 추정방법은 안테나의 dwell time 이 짧은 경우 해상도 문제가 발생하거나 또는 상대적으로 강한 반사 신호의 부엽 확산으로 인하여 상대적으로 약한 목표물의 탐지가 어려울 수 있다. 따라서 본 논문에서는 이러한 문제점을 개선하기위하여 시간영역에서의 도플러 신호모델 파라메터 추정을 통한 효율적인 도플러 스펙트럼 추정방법에 관하여 비교하고 고찰하였다.

• 한국군사과학기술학회지
• /
• 제25권2호
• /
• pp.135-143
• /
• 2022

In this paper, the compact waveguide slot array antenna for interferometric radar altimeter is proposed. The proposed antenna structure consist of corrugation structure which is applied between each channel to improve isolation, three-channel waveguide slot array antenna and feeder. In addition, to reduce the occurrence of phase ambiguity, the baseline spacing of the three-channel antenna is analyzed and the results are applied to the design. For compact design, reduced height and SMP connector structure are used and the dip brazing method which is the conjugation method after dipping to flux is used for the fabrication of the lightweight antenna. The measurement result of the proposed antenna shows less than 1.41 : 1 (VSWR) and 48.3 dBc (isolation). The antenna gain is higher than 20.2 dBi and the side lobe levels are lower than 18.8 dB (vertical plane) and 10.0 dB (horizontal plane).