• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.433-435
• /
• 2005

We have studied the realigning behavior of liquid crystal molecules in liquid crystalline polymer/liquid crystal(LCP/LC) system when they are exposed to external stimulation such as bending and pressing. The birefringence of the LCP/LC in a flexible display device was measured as a function of bending or pressing deformation. The microscopic dynamic behavior of main chain, side chain, and the LC were characterized by FTIR and polarization optical microscopy. When the device is deformed in scattering memory state, liquid crystal(LC) director is found to align from randomly oriented domain state(scattering state) to homeotropic state.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.177-180
• /
• 2000

In this study, we investigated the pretilt angle generation and liquid crystal (LC) alignment by ultraviolet (UV) exposure during imidization of polyimide on the polymer with side chain. The generated pretilt angle of nematic (N) LC using in-situ photo-alignment method was smaller than that of the conventional UV photo-alignment method. Also, the generated pretilt angle of NLC tends to increase by annealing.

• 한국전기전자재료학회논문지
• /
• 제11권6호
• /
• pp.477-480
• /
• 1998

In this paper, we investigated the liquid crystal(LC) alignment and generation of pretilt angle by using photo-alignment techniques on two kinds of polyimide(PI) surface, It was found that the uniform alignment for nematic(N) LC is obtained in a cell with slanted UV light irradiation on PI surface without side chain. We successfully observed that the pretilt angle of NLC is generated about $3^{\circ}$ with an incident angle of 70 degree on the PI surface without side chain. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecules and the polymer surfaces.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권9호
• /
• pp.876-880
• /
• 1997

In this paper we investigated the transcription of liquid crystal (LC) alignment method by using memory effect of nematic(N) LCon polymide(PI) surface with side chain as for non-rubbing alignment techniques. That the monodomain alignment of aligned NLC is observed by microscope textures in the cells on PI surface with side chain. We obtained that the pretilt angle of NLC are generated about 3.7$^{\circ}$on PI surface. We suggest that the LC alignment by using transcription alingnment method is attributed to memory effect of NLC on PI surface.

• Macromolecular Research
• /
• 제17권7호
• /
• pp.506-515
• /
• 2009

We synthesized a series of polystyrene derivatives containing various side chain terminal moieties, such as phenoxymethyl, 4-methoxyphenoxymethyl, 4-fluorophenoxymethyl, 4-methylphenoxymethyl, and 4-trifluoromethoxyphenoxymethyl groups, using polymer analogous reactions, in order to investigate the effect of the side group on their liquid crystal (LC) alignment behaviors. The polymers containing 4-fluorophenoxymethyl, 4-methylphenoxymethyl, or 4-trifluoromethoxyphenoxymethyl side groups had lower surface energy values and the LC cells fabricated using the unrubbed films of these polymers showed homeotropic LC alignment behavior. The LC cells fabricated using the rubbed films of the polymers containing phenoxymethyl or 4-fluorophenoxymethyl groups showed homogeneous planar LC alignment behavior in which the LCs were aligned perpendicular to the rubbing direction. This homogeneous planar and perpendicular alignment behavior was ascribed to the favorable anisotropic interactions between the LC molecules and the side groups preferentially oriented perpendicular to the rubbing direction.

• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.264-268
• /
• 2002

Three types of polymer, a photoalignment material based N- (phenol)maleimide were synthesized and the liquid crystal (LC) aligning capabilities on the photopolymer layer were studied. A good LC alignment with UV exposure on the PMI5CA(N-(phenol)maleimide with 5-carbon chain cinnamoyl group) can be obtained. However, the LC alignment defects were observed on the PM13CA (N-(phenol)maleimide with 3-carbon chain cinnamoyl group) and PMIF (N-(phenyl)maleimide including fluoro cinnamoyl group). Also, the good LC alignment with UV exposure on the PM15CA surface was observed at until $150^{\circ}C$ of annealing temperature. The LC aligning ability on the photopolymer layer based N-(phenol)maleimide depends on the side chain length of photopolymer.

• 공업화학
• /
• 제9권1호
• /
• pp.71-75
• /
• 1998

LCD용의 재료로 사용하기 위하여 새로이 합성된 저분자 액정 중간체들을 이용하여 epoxy resin 구조를 근간으로 하는 측쇄형 선형액정 고분자 및 가교된 측쇄형 액정 고분자를 만들고 이 들의 액정특성에 대하여 조사하였다. Alkyl spacer의 길이가 다른 방향족 amine 말단의 방향족 저분자 액정(ALC(n))과 ethylene glycol diglycidylether로부터 합성된 선형 측쇄형 고분자액정은 DSC 및 편광현미경 관찰로부터 mesogen으로 쓰인 저분자 액정과 같이 네마틱 액정상을 보였으며 spacer $-(CH_2){_n}-$의 길이에 따라 액정상-등방상 전이온도($T_{NI}$)는 even-odd현상을 나타내었다. 선형 및 가교형 측쇄 액정고분자의 $T_{NI}$는 저분자 액정의 그것에 비해 더 낮은 온도에서 나타났으며 또한 가교형 측쇄 액정고분자의 경우에는 가교제인 1,10-diaminodecane 사용량에 따른 $T_g$및 $T_{NI}$의 변화폭이 그렇게 크지 않은 것이 관찰되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.112-115
• /
• 1997

In this paper, we investigated the liquid crystal(LC) alignment and generation of pretilt angle by using photo-alignment techniques on two kinds of polyimide(Pl) surface. It was found that the uniform alignment for nematic(N) LC is obtained in a cell with slanted UV light irradiation on PI surface without side-chain. We successfully observed that the pretilt angle of NLC is generated about 3.3 degrees in a cell with an incidence angle of 70 degrees on PI surface without side chain. It is considered that the pretilt angle generation in NLC is attributed to interaction between the LC molecular and the polymer.

• 한국전기전자재료학회논문지
• /
• 제11권12호
• /
• pp.1128-1132
• /
• 1998

We have investigated the relationship between the polar anchoring energy and the surface order parameter in nematic liquid crystal (NLC), 4-n-pentyl-4-cyanobiphenyl (5CB), on the two kinds of the weakly rubbed polyimide (PI) surfaces. The observed polar anchoring energy of 5CB is approximately 2${\times}10^{-4}(J/m^2$) and then increases with increasing the rubbing strength (RS) on weakly rubbed surface (RS=57mm) with side chain at $30^{\circ}C$; same results are obtained on weakly rubbed PI surface without side chain. The surface order parameter of 5CB on rubbed PI surfaces increases with increasing the RS at a weak rubbing region. The surface order parameter of 5CB is strongly related to the characteristics of PI material. Consequently, we suggest that the polar anchoring energy of NLC is strongly attributed to the surface order parameter on rubbed PI surfaces.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.482-483
• /
• 2003

We have synthesized a new material of polyoxetane based liquid crystalline polymer/liquid crystal (LCP/LC) for flexible memory or dynamic mode device and characterized the electro-optics behavior of this system. The microscopic dynamic behavior of main chain, side chain, and the low molecular weight LC were characterized by X-ray scattering and time resolved FTIR..