• Resources Recycling
• /
• v.10 no.4
• /
• pp.34-41
• /
• 2001

A research was performed to evaluate a use of shredder residue to currently dispose of at landfills. Laboratory analyses were conducted to determine especially the fuel characteristics of shredder residue. For this aim, shredder residue was classified by the particle size as well as by the type of material and the content of Cl, S, ash, and calorific value were determined. Due to the chlorinated plastic content of shredder residue, mean concentration of Cl was found to exceed 4wt% except one sample while that of S was ranged from 0.25 to 0.39 wt%. As far as calorific value was concemed, plastic was observed to be more than 10,000 kcal/kg while wood/paper and fiber accounted for approximately 4,000 kcal/kg. Shredder residue was found to contain varying trace amounts of metal elements, including Fe of 6∼8.5 wt%. Hg and Cr(VI) were not detected, however, while Cd was contained as small as 0.0004-0.0009 wt%.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.1 s.178
• /
• pp.56-63
• /
• 2006

The aim of this study is to find the best cutting conditions as analyzing cutting process of paper shredder and shape of cutter. The test has been done variation of torque and cutting velocity according to load. When shape of cutter and distance between cutter and shaft are changed, The variation of cutting force according to cutting angle and load is geometrically analyzed. The result of geometrical analysis is presented that the radius and array of cutter is the method to improve torque of paper shredder. In this paper it is presented as basic method of design to improve cutting performance of paper shredder.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.5
• /
• pp.401-409
• /
• 2013

Recently, almost all data has stored and managed in the shape of digital as development of IT infrastructure. Digital data is able to store the huge data in very small space. but if the disk should be stolen or lost, it would have many secure problems such as data leakage. Currently, digital data is protected by encryption method to prevent data leakage. However, the encryption method is not enough to protect data because the performance of attack system is higher and the attack methods is various. Therefore, there is a need for a new advanced data protection method. To solve secure problems, many research has been progressed like Cloud Shredder, which distributes data and then store. In this paper, We found out the problem of the Cloud Shredder and proposed an advanced method of digital data protection to solve those problem.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.160-160
• /
• 2010

ELVs (End-of-Vehicles) in Korea incrasease continusely because of increase of used car. Automobile Shredder Residue (ASR) is final product of ELVs (End-of-Vehicles) after recycling. Automobile Shredder Residue are composed of light and heavy fluffs and soil/dust. In this study, 5 ton/day pilot plant of shaft type has been designed and constructed and 15 times of test run were performed. For the stable operation, operation conditions such as the amount of fed ASR and cokes, air flow and temperature in the gasification melting system have been changed and the composition of the produced gas such as $H_2$, CO and $CH_4$ and air pollution compound including dioxin discharged from the stack have been analyzed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.122-127
• /
• 2004

The purpose of this study is to introduce the standard of the durability and evaluation method for paper shredder. The major evaluation criteria include shredding capability, shredding blade (or cutter) hardness and edge roughness, and durability. Due to the difficulties in assessing the durability directly, performance deterioration of the shredder was assessed by measuring the torque variation along with the variation in shredded chip size and load, thereby proposing the indirect method of assessing the paper shredder durability.

• The Korean Journal of Ecology
• /
• v.19 no.6
• /
• pp.529-541
• /
• 1996

During the period of December 1992 (winter-spring) and from February 1995 (winter-spring), the leaf processing rates of oak (Quercus serrata) and tulip (Liriodendron tulipifera) tree was investigated in the headwater streams in southeastern part of Korea in conjunction with the distribution pattern of macroinvertebrate fauna. Using two types of bags ($10\times30cm$ with 5 g of dry leaves; open bag with holes, closed bag without holes), decomposition rates of oak and tulip tree by shredder and/or microbiota at a reatively undisturbed 2nd-order stream were compared, Regardless of leaf type, leaves in the open bage decomposed slightly faster than those in the closed bags. In the 1992 experiment, osk leaves decomposed much slower than tulip leaves (after 138 degree days, osk : closed, 0.006% loss/day ; open, 0.008 ; tulip: closed, 0.021 ; open, 0.023; n=2). The of the first experiment using oak leaves in 1995 were similar to those of the first experiment (after 151 degree days, oak: closed, 0.005% loss / day; open, 0.006; n=6). Over 50% of invertebrates from 122 leaf pack samples collected from 12 streams during the winter period of 1994 were identified as shredders (shredder, 56.2; collector, 32.7; scraper, 8.65; predator, 2.45%). Among shredders, Gammarus sp. and Tipula sp. were dominant species in terms of number and biomass (8.2 ind./g, 1.0 ind./g AFDW of leaves). Among many physico-chemical parameters, the width of stream channel was found to be the most influential factor in the distribution of Gammarus and Tipula (Gammarus: r=-0.34, P<0.001;Tipula:r=0.40, P<0.001). Considering the fact that oak is one the dominant riparian vegetation in the southeastern part of korea, the patterns of oak processing and shredder distribution shown in theis study may well represent some of the important characteristics of headwater steams in southeastern Korea.

• New & Renewable Energy
• /
• v.4 no.2
• /
• pp.81-86
• /
• 2008

Rotary kiln in cement work has been evaluated for a wide variety of organic wastes such as wood, used tyres, plastic wastes and automobile shredder residue (ASR). However the presence of chlorine hampers the use of ASR as fuel in rotary kiln. Therefore, the behavior characteristics of chlorine components in rotary kiln should be considered to develop an effective method for ASR treatment to recovery energy resources. The aim of this paper is to present the chlorine control system applied to a cement manufacturing process for ASR use as an alternative fuel. In this work, the simulation of bypass unit and cyclones for chlorine control in rotary kiln has been studied and compared with the operation results of field test.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.729-732
• /
• 2007

폐 자동차에서 발생하는 폐차잔재물(Automobile shredder Residue)의 시멘트 열원 활용을 위하여 시멘트 킬른에서의 염소제어기술을 확립하고자 하였다. 이를 위하여 본 연구에서는 ASR 발생공정에서 발생량이 가장 많은 light fluff 시료를 채취하였으며, 채취한 시료의 염소함량 분석 및 이를 토대로 하여 시멘트 킬른에서의 염소함량 순환거동을 예측하였다. 아울러 킬른내 염소제어설비의 안정적 가동을 위하여 기존 염소제어 시스템인 태평양 시멘트회사 시스템과 우베 시멘트회사 시스템의 장단점을 비교분석하여, 시멘트 킬른 내부에 함유되어있는 다량의 염소성분을 제어할 수 있는 기술개발 방향을 제시하고자 하였다.

• Resources Recycling
• /
• v.11 no.4
• /
• pp.11-16
• /
• 2002

Analysis and separation of constituent materials of old car have been performed by using the industrial shredding line. For this aim, three old cars made by domestic automobile manufacturers, Sonata II, Sephia and Prince were chosen and delivered in pressed form without engine, tires and doors, etc. Shredding line was substantially composed of pre- and main-shredder. cyclone, magnetic separation, eddy current separation and man-power separation. From the separation of shredder products, iron scrap was observed to be the major material of old car accounting for 60.1 ％ of total weight and non-ferrous metals involving Al, Cu and Zn, etc. were about 2％. Light fluff, about 90％ of total fluff product, was comprised with plastic, fiber and sponge, etc. and the fraction of 5 cm undersize in light fluff was 70.5%. In case of heavy fluff, however. rubber and plastic were found to be the major constituent materials of it. Among the constituent materials of fluff, plastic showed the highest calorific value, more than 10,000 cal/gr and leather and rubber showed relatively high chlorine content, 10.3 and 2.55 wt%, respectively.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.660-669
• /
• 2018

Domestic automotive shredder residue (ASR) recycling facilities must comply with 60% of the energy recovery criteria calculated by the waste control act, based on resource circulation of electrical and electronic equipment and vehicles. The method of calculating energy recovery criteria was newly enacted on November 6, 2017, and it has been judged that it is necessary to consider applicability. In this study, the energy recovery efficiency of 7 units was calculated by past and present calculation methods. Furthermore, this study attempts to find applicability and a method of increasing the energy recovery efficiency by taking advantage of available potentials. An analysis of the calculation results showed that the average values calculated by past methods, present methods, and the method that includes available potentials are 76.35%, 70.68%, and 78.24%, respectively. Therefore, the new calculation method for energy recovery efficiency is also applicable to domestic automotive shredder residue recycling facilities.