• 한국정밀공학회지
• /
• 제24권7호
• /
• pp.120-125
• /
• 2007

Analysis of elders' behavioral characteristic during showering provides important fundamental data when developing an automatic showering system. We recorded showering behavior of 37 elders' at the front, back, left and right view using four CCTV cameras. The photographic data were analyzed by counting the frequencies of body scrub and identifying zones where hands could reach. And we measured their body sizes, and conducted questionnaire of showering for 302 peoples. Analysis was done according to the analysis criteria established. The human body was divided into 14 zones from a body, and the numbers of body scrub for each zone were counted. The average total numbers of body scrub were 170.8 excluding the head, the face and the neck. The average numbers of body scrub with right hand were 70.2, left hand were 88.2, and both hands were 81.8. The percentages of body scrub frequencies were 16.3% (breast), 12.2%(crotch), 8.8% (abdomen), 7.5% (waist), 8.8% (shoulder), 7% (hips), 0.4% (back), 15.2% (arm), and 23.9% (leg). Elders scrubbed the breast, crotch and abdomen more frequently than the back and hips. According to the video analysis and questionnaire results, the distribution of shower heads (or nozzles) at the front side should be arranged at the ratio of 40% of the trunk(breast, shoulders, abdomen), 20% of the thighs, the calves, and the crotch, respectively. The distribution of shower heads (or nozzles) of the back side were arranged at the ratio of 20% of the waist and the arms, 20% of the back, the thighs, the calves, and the hip, respectively.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.768-773
• /
• 2009

A numerical study has been performed to investigate the thermal Performance of Solar heating system with baffle type of storage tank by using the commercial code TRNSYS. As a result, the solar fraction depends strongly on the efficiency and heat loss coefficient of solar collector as well as the heating capacity of house and the water temperature supplied to the shower. In addition, the solar fraction has been basically ranked to higher level in baffle type of storage tank than typical type of single storage tank for the range of operation condition.

• 설비공학논문집
• /
• 제22권11호
• /
• pp.805-811
• /
• 2010

A numerical study has been performed to investigate the thermal performance of solar heating system with baffle type of storage tank by using the commercial code TRNSYS. As a result, the solar fraction depends strongly on the efficiency and heat loss coefficient of solar collector as well as the heating capacity of house and the water temperature supplied to the shower. In addition, the solar fraction has been basically ranked to higher level in baffle type of storage tank than typical type of single storage tank for the range of operation condition.

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.653-658
• /
• 2011

In general, the purpose of packaging fasteners is a series of management activities to maintain the condition at the time of production until they get delivered to the end user. An automatic packing system for fasteners is consisted of bucket conveyor, slide feeder, vision inspection system, box-magazine conveyor system and automatic packing machine. Also, the automatic packing machine is consisted of six modules including charging device, clamping/opening device, sealing/cutting device, feeding/air-shower device, supplying/adjusting device and device frame, etc. In this paper, we proposed an automatic packing mechanism of the one station concept for packing work of fastener objects where the continuous batch work is performed in a finite space. The proposed one-station packing mechanism has been optimized through mechanical, dynamical, structural and fluid analyses. And it had been manufactured as the prototype of automatic packing machine. The field test for validation of performance was performed directly at the production line of bolt and screw. In the field test, this packing machine showed an efficiency of about 4.5 times the manual operation. It also showed 30% reduction in the consumption of packing materials compared to the manual operation. This automatic packing machine for fastener objects will be commercialized soon.

• 가정과삶의질연구
• /
• 제19권5호
• /
• pp.259-277
• /
• 2001

The purpose of this study was to identify household’s level and standard of consumption and their related variables in order to derive some useful implications for developing sustainable lifestyle. Data were collected from 567 household wives living in Seoul and the five Metropolitan cities in Korea. The results showed that most households owned such goods as central heating system, shower and bath, refrigerator, microwave oven, vacuum cleaner, washer. TV video player, personal computer, mobile phone, and car. They thought that most of the goods were necessary for the desired level of living and has a strong aspiration to buy those goods. This implied a tendency of uniformity in need perceptions and consumption patterns among Korean households. However, level and standard of consumption measured in selected living area differed according to age. education family size, household income, occupation, and the size housing, which showed that different approach was needed for developing sustainable lifestyle according to these variables.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2002년도 추계학술발표대회
• /
• pp.161-166
• /
• 2002

Functional ability is an important criterion to predict the capability of older persons to maintain independent living in the community setting. This study focused on the effect of built-environment features to ameliorate declines in functional ability and reduce the likelihood of relocation. Using longitudinal data from the Asset and Health Dynamics Among the Oldest Old (1993, 1995), relocation was analyzed for 6,225 respondents aged 70 or older. Findings are that while functional decline in household activities of daily living among older persons increased their residential moves in the community, functional declines in basic activities of daily living, household activities of daily living, and advanced activities of daily living among them increased their entrance into an institutional care facility However, they were less likely to enter an institutional care facility when their home was equipped with built-environment features such as street level ramps, special railings, modifications to allow someone in a wheelchair, grab bars or shower seat in the bathroom, and special call device or system to get help.

• 한국실내디자인학회논문집
• /
• 제14권4호
• /
• pp.45-53
• /
• 2005

Compared with a lot of comprehensive and alternative studies on elderly housing facilities until now, specialized studies of dimensional and detailed standards have hardly made. Therefore we intends to examine the status of bathroom planning on representative elderly housing facilities in Korea. As the methods of this study, we executed a field study into five representative elderly housing facilities in Korea. We visited each two units out of the outstanding 5 facilities and surveyed the total ten bathrooms. Then we analyzed the space planning of them and the state of bathroom commodities, and measured the bathroom equipment. In addition, we collected questionnaires about satisfaction, preference, and problems from the residents. As a result, most of the bathrooms had powder rooms and were furnished with bathtubs(4) and shower stalls(6). One or more grab bar and emergency calling system were provided but the heights of the handles were different from each bathroom. The floor material of bathroom should be installed with no-slippery material.

• 한국축산시설환경학회지
• /
• 제21권2호
• /
• pp.55-64
• /
• 2015

This survey was conducted to give the basic information and temperature and humidity variation by cooling systems in dairy farms in Korea. A total of 36 farms were surveyed in Gyeonggi province with the general information of farms such as milk production, and milk quality, types of cooling systems, and its operation method of dairy farms. All of surveyed farms have cooling fan and some have 1 more cooling systems such as sprinkler, foggy systems, ventilation duct, and shower system. Although the indoor THI of cow house was decreased by either ventilation duct or foggy system during hot season, the range belongs to mild heat stress scale for dairy cows.

• Archives of Plastic Surgery
• /
• 제34권1호
• /
• pp.60-63
• /
• 2007

Purpose: Free transverse rectus abdominis musculocutaneous(TRAM) flap is one of the most popular methods of breast reconstruction. But if fat necrosis and fatty induration occur at the reconstructed breast, they can make the breast harder and make it difficult to differentiate a tumor recurrence from them. To expect and prevent these complications, we measured the pressure change of the superficial venous system whose congestion can be the cause of them. Methods: An intraoperative clinical study was done to compare venous pressure of superficial inferior epigastric vein(SIEV) before and after the elevation of free TRAM flap. Fourteen TRAM flaps were included and the pressures of SIEV were measured two times at the beginning of the elevation and just before the division of the inferior pedicle. Results: The venous pressure in free TRAM flap was significantly higher after the flap elevation at both contralateral side and ipsilateral(p=0.005 and p=0.026 respectively). The four cases with vertical scar shower significantly greater increase at contralateral side than ipsilateral side(p=0.020). Conclusion: Intraoperative venous pressure recording can be an objective data for evaluating the congestion of TRAM flap and can help to prevent the complications of fat necrosis and fatty induration with venous superdrainage.

• 대한안전경영과학회지
• /
• 제19권4호
• /
• pp.115-123
• /
• 2017

Recently there is a growing interest in the airborne spread of virus. In particular, there is growing interest in secondary infection through the air in the hospital. The distribution of air-born virus depends on ventilation system installed in a hospital. In this study, simulations were carried out to predict the move of air-born virus by ventilation system at hospital. Simulation results showed that pressure distribution was -372.05Pa ~ -3.45 Pa at 1st floor incase of only used mechanical exhaust at bathroom, shower stall, storage, kitchen etc.. if ventilation switch from used mechanical exhaust to mechanical exhaust & mechanical supply. Simulation results showed that pressure distribution was -336.44Pa at stair hall < -0.2Pa at bathroom < mean 1.19Pa at other room. So simulation results showed that using all of the mechanical supply and mechanical exhaust was more effective then the mechanical exhaust for maintain the pressure distribution in hospital. It was also showed that when using the mechanical supply and mechanical exhaust more effectively prevention of air born virus diffusion.