• 패션비즈니스
• /
• 제27권5호
• /
• pp.26-43
• /
• 2023

This study sought to typify and characterize the upper body shape of women with large breasts by classifying only Korean adult women aged 20-69 years whose difference dimension between bust and underbust circumference was 12.5 cm or greater. This study attempted to provide necessary information for the development of upper body clothing for women with large busts. Upper body horizontal, upper body height, shoulder size, upper body length, and shoulder slop factor were extracted to constitute upper body shapes of women with large busts. Upper body shapes of women with large busts were classified into four types: low obese upper body tall body type, high normal upper body short body type, drooping shoulders slender upper body tall body type, and broad shoulders slender upper body short body type. Upper body proportions of women with and without large busts were analyzed as follows. Women with large breasts had narrower shoulder width compared to bust width and waist width. Their underbust and waist circumferences were larger than their bust circumferences. For the development of tops for women with large busts, bodice pattern development was required, taking into account shoulder width, chest, and upper body length. Future studies should focus on angles of busts in more detail. Research should be conducted on the development of bodice by upper body type of women with large busts analyzed.

• 복식
• /
• 제49권
• /
• pp.25-48
• /
• 1999

The purpose of this study is to offer fundamental data for classification of somatotype for boys of elementary school age. The subject were 458 elementary school boys aged from 7 to 12 living in Pusan, Data were collected by 57 anthropometric and 11 photographic measurements and analyzed by factor analysis according to SAS package 1. Through the factor analysis by each period of school ages 6-7 factor were obtained in upper half and they are as followings: 1) Factor 1 is horizontal size of upper half in every period 2) Factor 2 is vertical size of upper half in every period 3) Factor 3 is shoulder shape in the first period and length of upper half in the middle and latter period 4) Facto 4 sis length of upper half in the first period and shoulder shape in the middle and latter period 5) Factor 5 is angle shape of the breast and back in the first period angle shape of the lower breast and back in the middle of period and angle shape of the upper breast and back in the latter of period 6) Factor 6 is angle of shoulder in the first period angle shape of the upper breast and back in the middle of period and angle shape of the lower breast and back in the latter of period 7)Factor 7 is angle of shoulder in the latter of period 2. Through the factor analysis by each period of school ages 5-6 factor were obtained in lower half and they are as followings: 1) factor 1 is horizontal size of upper half in every period 2) Factor 2 is vertical size of upper half in every period 3) Pactor 3 is angle shape of the belly and upper buttock in the first period and length of lower half in the middle and latter period 5) Factor 5 is angle shape of the lower buttock in the first period angle shape of the upper belly and buttock in the middle of period and angle of the side posture in the latter of period 6) Factor 6 is angle shape of the lower buttock in the middle of period and angle shape of the lower belly and buttock

• 복식
• /
• 제56권4호
• /
• pp.48-64
• /
• 2006

The purpose of the study was to demonstrate how to recreate spencer jacket in the empire style in an attempt to apply this historic style to theatrical costumes and other high fashion items in modern times. The study was carried out through 2 steps. (1)Block patterns of spencer jacket of its basic design were developed through draping based on the design characteristics mentioned above. (2)Spencer jackets of three designs, which were the typical designs of each category have been made of velvet to find out more specific structural characteristics. The structural characteristics of Spencer jacket in draping were as follows: (1)Jacket length position was suitable 9cm below body's bust line and neckline should be enlarged front & side neck point 2cm, back neck point 1.5cm. (2)Cut out the front bodice after CF line moved 1cm outwards and bust dart amount should not exceed 2-3cm. Shoulder point moved inwards. (3)Side back grain line was parallel to princess line of the back bodice. Add 0.5cm ease to the under arm of the front and side bark bodice, it was good for the activity of arm. (4)Armhole line was trued as maintaining to across back width 14-15cm at least. Shoulder line was to connect from the point 2cm depart shoulder point along armhole line to point 2cm side neck point along neck line. (5)Sleeve length was suitable 70cm, cut out the bias direction to move forwards the grain line from shoulder point. Puff position was good from the 2cm depart shoulder point to shoulder line.

• 복식문화연구
• /
• 제17권2호
• /
• pp.203-215
• /
• 2009

The purpose of this study was to investigate current garment sizes of women's formal jackets, targeting plus-size women in online shopping malls, and to identify effective size information involved in online apparel purchase behaviors to overcome the short comings of current garment sizes from the perspectives of consumers. Basic 88 size formal jackets from the seven companies found on the 22 websites were collected and analyzed. The data were collected from March to October 2007, and analyzed using SPSS 14.0. The results were summarized as follows. First, there was no website using standard garment size labeling with 'bust-hip-height' set up by KS K 0051 among the 22 websites. Instead, all 22 websites used garment size labeling with figures such as 88, 99, 100, 110, and 120 or with letters such as L, XL, and XXL. The websites presented no body size, but listed garment size. Furthermore, the size information was presented differently, ranging from three items of bust circumference, upper arm length, and jacket length to six items of shoulder width, bust circumference, waist circumference, sleeve width, sleeve length, and jacket length. In addition, no website presented basic information for hip circumference, despite the jacket length covering the hips. Second, a total of 85.7% the websites listed bust circumferences in 88 garment sizes collected as 100cm. Shoulder widths were presented as 39cm or 37cm. Sleeve circumferences were addressed the same, 36cm, in all websites. Third, comparing the differences between guidance sizes and measurement sizes, only 28.5% of the web sites posted guidance sizes of shoulder widths the same as those of the measurement sizes. All web sites presented guidance sizes of bust circumstances as 1 to 5cm smaller than those of the measurement sizes.

• Clinics in Shoulder and Elbow
• /
• 제7권2호
• /
• pp.70-75
• /
• 2004

Purpose: To evaluate the results of arthroscopic repair of traumatic anterior shoulder instability with glenoid bone defect. Materials and Methods: Nineteen patients who had underwent arthroscopic repair for the shoulder with traumatic anterior instability and glenoid bone defect were retrospectively reviewed. Mean age was 24.6 years(range, 20 to 39) and mean follow-up was 23 months(range, 19 to 55). No glenoid bone defect was greater than 7mm in length and 20% of the glenoid. The results were evaluated according to stability, range of motion and function. Results: All patients obtained excellent-good results according to Rowe scoring system. Two patients(10.5%) had instability. The mean loss of external rotation was 15 degrees (range, 0 to 25). Functionally, 17 patients could participate in preinjured work or sports to the same level with or without mild discomfort. The remained 2 patients who had 25 degree loss of external rotation could not play sports. Conclusion: Though arthroscopic repair is a good treatment for traumatic anterior shoulder instability with small glenoid bone defect, it is possible to cause loss of external rotation

• 한국의류학회지
• /
• 제15권2호
• /
• pp.139-150
• /
• 1991

The purpose of this study is to do the Somatotype classification according to the type of shoulder-neck and to give the thinkness of shoulder pad according to them. Therefore this study was measurement body size of 201 and the somatotypes were classified as their plumb line. The standard somatotype of this measurement was classified as 9 type according to its angle of shoulder inclination and neck length. Pads which have different thickness (1 cm, 1.5 cm, 2 cm) were attached to the 9 body type and the set-in sleeve blouse and raglan sleeve blouse were made and tring test and sensory test were accomplished. The results of this study were as follows: 1 . Classification of shoulder-neck relationship. Angles of shoulder inclination ($15^{\circ},\;21^{\circ},\;27^{\circ}$), lock lenaths (10 cm, 12.5 cm, 15 cm) were classi- fied as 3 type each and these types were combined as 9 types. II . The result of angle difference of shoulder inclination according to pad thickness. 1) In case of set-in pad. angle is increased $5.75^{\circ}$ per 1 cm of pad thickness. 2) In case of raglan pad. angle is increased $6.45^{\circ}$ per 1 cm of pad thickness. III. The most fit pad thickness to the 9 types. In case of set-in sleeve blouse. 1) High shoulder-long neck, Standard shoulder-long neck Low shoulder-long neck, Stan-dard shoulder·standard neck. Low shoulder-standard neck: 1.5 cm. 2) High shoulder-standard neck, Standard shoulder-short neck, Low shoulder-short neck: 1 cm. 3) High shoulder-short neck: 0 cm(without pad) In case of raglan sleeve blouse. 4) High shoulder-long neck, Standard shoulder-long neck, Low shoulder·long neck, Stan-dard shoulder-standard neck, Low shoulder-standard neck: 1.5 cm. 5) High shoulder-standard neck, Standard shoulder-short neck, Low-shoulder-short neck: 1 cm. 6) High shoulder-short neck: 0 cm(without pad)

• 한국의류학회지
• /
• 제15권4호
• /
• pp.341-349
• /
• 1991

This study was done to provide basic data for clothing design and thus to contribute to the academic development of the clothing and textile area. The focus of this study was to charac­terize the somatotype based on each individual's lateral view. For this purpose, firstly, categorization of the subjects based on their lateral view and definition of each category, secondly, characterization of each somatotype, and thirdly, sugges­tion of the deterministic criteria of each category were complished. The subjects in this study were female college students of 18 to 26 year-old whose somatotypes were comparatively invariable after cessation of physical growth. The metrical items characterizing upper body lateral view were chosen. Data were collected through Anthropometry and Photometry and analyzed by Factor analysis. The results were as follows; 1. Each subject's side view contour was classified as straight type, lean-back type, bend­forward type, and swayback according to its position to the relative plumb line. Straight type was defined as the type in which the plumb line passes through the lobe of the ear, the shoulder joint, and the mid abdominal region laterally. Lean-back type positioned the plumb line more posteriorly than straight type. Bend-forward type positioned the plumb line more anteriorly than straight type. Swayback positioned the plumb line at about the same line as straight type. And curvature of side view contur was more prominent in this type than in straight type. 2. Seven factors were figured out. The first factor was representing upperbody volume, and the second factor was representing size, the third factor was horizontal distance from lateral view representing size view contour. The fourth factor was front body length, the fifth factor was back body length. The sixth factor was shoulder length and shoulder width representing shoulder shape. The seventh factor was the bust shape.

• Clinics in Shoulder and Elbow
• /
• 제21권4호
• /
• pp.207-212
• /
• 2018

Background: Delaminated rotator cuff tear is known to be a degenerative tear having a negative prognostic effect. This study undertook to compare the anatomical and clinical outcomes of delaminated tears and single layer tears. Methods: Totally, 175 patients with medium to large rotator cuff tears enrolled for the study were divided into 2 groups, based on the tear pathology: single layer tear (group 1) and delaminated tear (group 2). Preoperatively, length of the remnant tendon, muscle atrophy of supraspinatus (SS), and fatty degeneration of SS and infraspinatus (IS) muscles were assessed on magnetic resonance imaging (MRI). For follow-up, the repair integrity of the rotator cuff was evaluated by ultrasonography. Clinical outcomes were assessed by evaluating the Constant score (CS) and Korean Shoulder Score (KSS). Results: Retears were detected in 6 cases of group 1 (6.5%) and 11 cases of group 2 (13.3%). Although higher in group 2, the retear rate was significantly not different (p=0.133). Preoperative MRI revealed length of remnant tendon to be $15.46{\pm}3.60mm$ and $14.17{\pm}3.16mm$ (p=0.013), and muscle atrophy of SS (occupation ratio) was $60.54{\pm}13.15$ and $56.55{\pm}12.88$ (p=0.045), in group 1 and group 2, respectively. Fatty degeneration of SS and IS in both groups had no significant differences. Postoperatively, no significant differences were observed for CS and KSS values between the groups. Conclusions: Delaminated rotator cuff tears showed shorter remnant tendon length and higher muscle atrophy that correlate to a negative prognosis. These prognostic effects should be considered during delaminated rotator cuff tear treatment.

• Clinics in Shoulder and Elbow
• /
• 제25권3호
• /
• pp.195-201
• /
• 2022

Background: This study aimed to examine the preliminary clinical results of the infraspinatus rotational transfer procedure for irreparable posterosuperior rotator cuff tears. Methods: This study included 34 patients (mean age, 68.4 years). Their mean tear width and length measurements were 50.9 mm and 50.6 mm, respectively. The functional outcomes, including physician-determined and patient-reported scores, were evaluated before and at 1 year after surgery. The structural outcomes determined using the magnetic resonance imaging examination results were also assessed. Results: The clinical scores significantly improved after surgery compared with the scores before surgery: the Constant-Murley score (53.3±21.1 to 76.8±10.5), University of California at Los Angeles Shoulder score (15.6±3.6 to 27.8±6.7), American Shoulder and Elbow Surgeons Shoulder score (51.8±18.3 to 89.1±13.5), and WORC score (925.0±436.8 to 480.3±373.2) (all p<0.001). Postoperative re-tears were noted in two patients (5.9%). Conclusions: One year postoperatively, the patient's clinical scores significantly improved, with a re-tear rate of 5.9%.

• 한국의류학회지
• /
• 제23권6호
• /
• pp.864-875
• /
• 1999

This study was done to classify type os arms and to correspond these types with partial somatotype of upper body such as lateral views of upper body shapes of shoulder. The subjects of this study were female college students of twenties 58 anthropometric and photographic data were measured. The results were as follows : 1. Form the factor analysis arm girth/armscye size factor arm length factor the slope of lower arm, arm factor the curves of armscye the roundness of arm/shapes of shoulder the slope of upper arm factor were obtained. 2. By using factor scores 4 clusters of arm types were extracted. The characteristics of these clusters were projections of armscy slant of lower arm thick-set canelike. 3. Four types of arm were corresponded with the specified lateral views of upper body directions of shoulder slopes of shoulder.