• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.4
• /
• pp.10-15
• /
• 2012

The design of automobile occupant seat belt system has been studied by using MADYMO. Based on the FMVSS 208 (Federal Motor Vehicle Safety Standards 208) and the USNCAP (United States New Car Assessment Program) regulations, seat belt design parameters were chosen for the design improvement to the 5th percentile female dummy: limit force of load limiter, time to fire of shoulder belt, inlet length of shoulder belt, inlet length of lap belt. The design of experiment method was employed to optimize the design parameters of passenger seat belt. Range of injury probability due to the change of H-point position was estimated by the simulation.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.3
• /
• pp.259-267
• /
• 2014

The purpose of this study was to find the relationship between standing posture biomechanics and physical fitness in the elderly. Physical fitness variables and postural variables for 227 (140 women and 87 men) elderly individuals were tested. Physical fitness tests (Korean Institute of Sports Science, 2012) included 3m sit, walk, and return, grip test, 30 second chair sit and stand, sit and reach, figure 8 walks, and 2 minute stationary march. Postural biomechanics variables included resting calcaneal stance position (RCSP), shoulder slope, pelvic slope, knee flexion angle, leg length difference, thoracic angle, and upper body slope. In statistical analysis, multiple regression was conducted by using stepwise selection method via SAS (version 9.2). Analysis for both men and women revealed significant relationships between physical fitness and age, upper body slope, knee flexion angle, leg length difference. Pelvic and thoracic angle were only related to figure 8 walking and sit and reach in women, while RCSP and shoulder slope had no relationship with any physical fitness variables.

• Journal of the Korean Home Economics Association
• /
• v.30 no.3
• /
• pp.63-77
• /
• 1992

The purpose of this study is to improve clothing construction by analyzing form variation of upper trunk & upper arms with the use of plaster cast. Experimental research was performed by plaster gypsum method. The subjects were males between age 21 and 25, classified Standard somatotype by their bust size and Rorher Index. Arm movements were consisted of 5 types(0$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$, 135$^{\circ}$, 180$^{\circ}$) to each vertical motion in front. The statistical analyses used in this study were mean, standard deviation, repeated mesure design. The result obtained from this study were as follows; 1. As a result of investigating into the rate of the expantion and contraction of basic body-surfact-lines, the side seam length showed the maxium rate of expantion in 180$^{\circ}$ degrees, the shoulder length showed the maxium contraction in the same degrees. 2. The variation of the upper part of the body form by increasing the upper limb motions, shoulder point was moved to be the inside or upside. And the anterior armfit point, posterior armfit point and armfit point were moved to upside. The form of the armhole-line in Drafts of a body surface was differently changed by increasing the movements. 3. Increasing the upper limb motions, the height of sleeve cap decresed and width of the sleeve decreased but girths of the sleeve cap was not show consistant change.

• The Research Journal of the Costume Culture
• /
• v.23 no.3
• /
• pp.512-522
• /
• 2015

The aim of this study was to investigate the change in women's somatotype with aging. The subjects were 1,123 women aged 40~69. Their anthropometric data were from the 6th Size Korea. The data were analyzed by factor analysis and cluster analysis. Seven factors were extracted: body mass, body length, back shoulder, arm length factor, front interscye factor, body rise factor, and shoulder angle. The upper body types of middle-aged and elderly women were classified into five types: skinny, short stout body type with forward posture, composite, tall & full body type, and short & skinny. The skinny and composite body type appeared more often than the short stout body type in the early 40s of Korean women. Starting in the mid-50s, composite body type was less often found. However, the number of women with short stout body type increased. In the 60s, the number of women with short stout and tall & full body types decreased. These results reveal that the body types of middle-aged and elderly women changed with some pattern with aging. And women in their early 40s, mid-50s, and 60s women had different body shapes and postures.

• Journal of the Korean Home Economics Association
• /
• v.26 no.2
• /
• pp.1-13
• /
• 1988

The purpose of this study was to classify somatotype of males, to show changes of the body skin surface by the somatotype. The size of sample was 156 males between age 20 and 24. Somatotype classified into Bending somatotype, Standard somatotype, Turning over somatotype. And according to the somatotype, changing of the upper part of the body by the arm movements analyzed through gypsum experiment. The result obtained from this study were as follows; 1. the variation of the upper part of the body form by changing the am movements, by the increasing of movements, shoulder-point ws moved to be inside or upside, the anterior armpit point & armpit point were moved to the upside. 2. As a result of investigating into the rate of the expansion and contraction of the basic lines and body surface area by the arm movements, the rate of expansion and contraction of the basic lines by the arm movements, the side sea length showed the maximum rate of extension in 135 degrees, the shoulder length showed the maximum rate of contraction in 135 degrees. The rate of expansion and contraction on the body surface area by the arm movements showed the phenomenon of contraction, of items F1, F6, B1, B9 showed the phenomenon of extension, of items F3, F4, F8, F9, B8, B9. 3. According to somatotypes, items which show the significant difference were, of items f3, f8, b3, b8, F2, F7, F8, B3, B7, in all movements.

• Journal of the Korean Home Economics Association
• /
• v.32 no.2
• /
• pp.219-230
• /
• 1994

The purpose of this comparative research is to investigate the change of the drafting method of the basic patterns for women in Korea. Followings were the findings of this research: 1) The concept of the basic pattern could be found after the first of the 1950s and there was introduction of the many basic patterns. At first measurement couldn't be found. Gradually the personal body type could be expressed in the basic pattern through the practical measurements such as the width of highest bust level and the length of neck to bust. 2) Through the ages the changes of the basic patterns were between 1950,60s and 1980,90s distinctively at the back width back shoulder angle front and back shoulder height from biceps line back neck ratio(height/width) BP position at the biceps line the amounts of underarm dart underarm dart position from the biceps lines and front ease angle at BP line. 3) 4 Grouping the types of the basic pattern followings are their characters; 1st Munwha or Doreme style 2nd waist dart group 3rd underarm dart and rectangular front ease 4th the usage of many measurements like as front length upper bust girth etc.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.6
• /
• pp.482-489
• /
• 2018

Most of the numerical and experimental studies on supercavitating flows are focused on the cavitator only. However, the partial cavity growing into the supercavity is affected by the shape of the body placed behind the cavitator. In this paper, we develope a numerical method which is based on the boundary element method to predict supercavitating flow around three-dimensional axisymmetric bodies. We estimate the influence of the body shape on the supercavity growth. Here, we consider various parameters of the body such as cavitator shape, shoulder length and body diameter, and compare the results with the case of the cavitator only. In summary, it is found that the body may impede the cavity growth, the shoulder mainly affects the cavity length, and the supercavity occurring in the cone type cavitator is strongly influenced rather than that of the disk type cavitator.

• Fashion & Textile Research Journal
• /
• v.2 no.4
• /
• pp.353-359
• /
• 2000

The purpose of this study was to develop the jacket pattern drafting method for Korean middle-aged women. The study was composed as follows : 1. Body measurement and statistical analysis : Two hundreds and forty four middle-aged women between the ages of forty five and fifty nine were measured on 52 items. 2. Development of new jacket pattern drafting method : Measurement items necessary to draft new jacket pattern were back waist length, bust girth, waist girth, hip girth, back interscye breadth, front interscye breadth, neck base girth, nipple length, nipple to nipple breadth, 1/2 posterior shoulder length and sleeve length. Basic jackets constructed from the experimental patterns were examined through the fitting test. 3. Evaluation of the new pattern drafting method : The sensory evaluations for appearance and comfort were applied to evaluate the new jacket pattern by comparing it with one of the conventional jacket patterns (Lee Hyung-Suk's). According to the result of sensory evaluation, the new jacket pattern was more positive.

• Journal of Fashion Business
• /
• v.9 no.1
• /
• pp.79-88
• /
• 2005

The purpose of this study is to propose the design of the patient's clothes for a disabled child between 4 and 6. For this, in this study, I would present the following design plan which includes 3 upper garments, 2 trousers and a one-piece dress. In case of the damage on head and neck, a neck line should be deep and wide thereby providing ease to the clothes. To facilitate injection and dressing/undressing, there should be parting from neck to cuff which can be fixed by snap or button. By rolling up sleeves with strings inside the cuffs and fixating plaster cast with snap button outside the cuffs. In case of body cast with plaster cast around body part, front adjusting part should be wider and the width should be adjusted with strings. In case of hip spica cast which covers waist, I separated front part and rear part, fixated them with snap buttons, gave more width to front adjusting part with strings to adjust width, which constitute one-piece dress. In case of shoulder spica cast, the other shoulder which is not covered with plaster cast should be exposed, and to prevent clothes' coming down, strings with snap button or velcro should be attached over a shoulder so that the length of the strings can be adjusted. In case of applying plaster cast or aid to the whole part of a leg, one part of trousers should be shorter so as to expose the injured part and there should be a parting with strings or velcros on the side for easy dressing/undressing. When plaster cast or splint is short, The strings are meant to adjust length of trousers. The partings are located 2 cm from side lines toward the center.

• Journal of Fashion Business
• /
• v.7 no.4
• /
• pp.78-92
• /
• 2003

The upper-body characteristics of the right-handed and the left-handed are examined and compared through 1-dimensional measurement and 2-dimensional measurement. The results were as follows: 1. According to 1-dimensional measurement results, the clearest differences were seen in girth items rather than height or length items. In particular, hand girth, lower arm girth, and upper arm girth were bigger on the left side in the left-handed group and the right side in the right-handed group. This is thought to be relevant to the arm muscles frequently used. 2. According to 2-dimensional measurement results, significant differences appeared in the females of the left-handed group: shoulder point among width items. In the right-handed group, some differences of significance were shown in females (shoulder point, rear armpit point, and B.P. point among width items) and males (front neck point among extreme vertical distance items). In summary, the body type characteristics of the left-handed and the right-handed reveal great differences in the items related to arm length and arm girth. In other words, the sleeve and shoulder patterns production based on the right-handed don't rightly reflect the somatotype characteristics of the left-handed. In addition, in the cases of athletes, laborers, and the disabled who frequently use particular muscles or parts of the body, this sort of research in the patterns is consistently needed in order to reflect the size differences in girth items in upper body.