• Tribology and Lubricants
• /
• v.35 no.1
• /
• pp.37-43
• /
• 2019

This paper presents an optimization method to determine the shoulder height of an angular contact ball bearing by 3D contact analysis using nondimensional-shaped variables. The load analysis of the ball bearing is performed to calculate the internal load distributions and contact angles of each rolling element. From the results of bearing load analysis and the contact geometry between the ball and inner/outer raceway, 3D contact analyses using influence function are conducted. The nondimensional shoulder height and nondimensional load are defined to give the generalized results. The relationship between the shoulder height and radius of curvature of the shoulder under various loading conditions is investigated in order to propose a design method for the two design parameters. Using nondimensional parameters, the critical shoulder heights are optimized with loads, contact angles, and conformity ratios. We also develop contour maps of the critical shoulder height as functions of internal loads and contact angles for the different contact angles using nondimensional parameters. The results show that the dimensionless shoulder height increased as the contact angle and dimensionless load increased. Conversely, when the conformity ratio increased, the critical shoulder height decreased. Therefore, if the contact angle is reduced and the conformity ratio is increased within the allowable range, it will be an efficient design to reduce the shoulder height of ball bearings.

• The Research Journal of the Costume Culture
• /
• v.23 no.1
• /
• pp.117-125
• /
• 2015

The purpose of this study is to evaluate the differences of body compensation image on variations in the shoulder height and width of power shoulder raglan sleeve jacket. Nine samples were examined: 3 variations of the shoulder height and 3 variations of the shoulder width. The data was evaluated by 123 fashion design majors. The results were as follows; as a result of analyzing the body compensation image according to changes in the shoulder height and width of power shoulder raglan sleeve jacket, five factors were selected; the shoulder compensation factor, the bust compensation factor, the waist compensation factor, the arm compensation factor and the neck compensation factor. Among these factors, the shoulder compensation factor is the most important factor. Examining the major effect of the body compensation image based on changes in the shoulder height and width of power shoulder raglan sleeve jacket, it had an independent influence on factors about waist, neck, shoulder and arm compensation except a factor about bust compensation, had an influence on interacting effect of factors about shoulder, bust, waist, arm compensation, and it had no influence on interacting effect of a factor about neck compensation. This shows that the shoulder height has larger effect on neck compensation image than the shoulder width in power shoulder raglan sleeve jacket.

• Journal of the Korean Society of Physical Medicine
• /
• v.18 no.4
• /
• pp.1-17
• /
• 2023

PURPOSE: The purpose of this study was to compare how the shoulder height and respiratory function are affected by applying shoulder stabilization exercises and core stabilization exercises that are effective for strengthening the trunk muscles and postural stability for adults with a round shoulder posture (RSP). METHODS: The participants were 28 young adults with RSP. They were assigned randomly to two groups: shoulder stabilization exercise and core stabilization exercise. They performed the exercises for 30 minutes twice a week for four weeks. They measured the shoulder height and respiratory function before and after exercise. RESULTS: No significant difference in shoulder height was found between the groups. A significant decrease in shoulder height was found in the shoulder stabilization exercise group after exercise. The core stabilization exercise group showed a significant decrease after exercise. In respiratory function, no significant difference was found between the groups. The forced vital capacity (FVC) and forced expiratory volume in one second (FEV₁) were increased significantly in the shoulder stabilization exercise group before and after exercise. The FEV₁, FEV₁/FVC, and peak expiratory flow were significantly higher in the shoulder stabilization exercise group after exercise than in the core stabilization exercise group. CONCLUSION: Shoulder stabilization exercise and core stabilization exercise improved the postural alignment and pulmonary function, and the exercises could be helpful in shoulder rehabilitation as well as the clinical part of the treatment of rounded shoulder posture.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.2
• /
• pp.9-16
• /
• 2015

PURPOSE: The objective of this study was to identify the effects of shoulder abduction strength and EMG activities of the selected scapular and shoulder muscles during isometric shoulder abduction. METHODS: Thirty-four healthy young females were recruited for this study. Surface EMG equipment with inline force sensor was used to determine the shoulder abductor strength and the activity of the serratus anterior (SA), upper trapezius (UT), lower trapezius (LT), and middle deltoid (MD) during three shoe heel height conditions: (1) barefoot, (2) 3-cm shoe heel height, and (3) 7-cm shoe heel height. RESULTS: Isometric shoulder strength showed statistically significant difference among the conditions (p<0.05), and post-hoc test showed lower strength during the 7-cm condition ($49.98{\pm}17.56kg$) than during the barefoot ($44.97{\pm}20.15kg$) and 3-cm conditions ($36.59{\pm}17.07kg$). Furthermore, EMG activities of the SA, UT, and MD appeared to be statistically significantly different among the conditions, with lower values in the 7-cm condition compared to the barefoot condition (p<0.05). EMG ratios (MD/UT and SA/UT) were lower during the 7-cm condition than during the barefoot condition (p<0.05). CONCLUSION: These findings suggest that isometric shoulder abduction strength and EMG activities of scapular and shoulder muscles may be adversely changed with increasing shoe heel height.

• Journal of the Ergonomics Society of Korea
• /
• v.18 no.1
• /
• pp.91-108
• /
• 1999

In our previous work using a motion analyzer and 3-dimensional sonic digitizer, the arm shapes for 23 women in their early twenties were classified into three characteristic types. In order to design sleeves, suitable for arm movements for the three characteristic arm shapes, a relationship between arm length variation and shoulder/elbow angles has been investigated for four cases of arm movements (flexion, extension, adduction and abduction). Each arm movement can be characterized by the changes in shoulder angle and the changes in elbow angle at the maximal shoulder angle. In all the four cases of arm movements, the changes of shoulder length and cap height are largest at the maximal shoulder angle. These changes were little affected by changes in elbow angle. The changes in the lower arm length and the difference between cap height and upper arm length are the largest at the maximal elbow angle of the maximal shoulder angle. There is a linear relationship between cap height and shoulder angle during arm movements; thus, in designing sleeves the cap height can be determined from the regression of cap height vs. shoulder angle.

• The Research Journal of the Costume Culture
• /
• v.26 no.1
• /
• pp.95-108
• /
• 2018

This study analyzed the body shape of the body of 17~19 years old female students using the SPSS 20.0 statistical program according to the 7th Korea Human Body Survey. Factor analysis was based on six factors including body size, body height, shoulder length, and width, upper body length, hip length, and shoulder inclination related factors. Through this cluster analysis, the body shape of late adolescent female student was classified into four types. Body type 1 was the highest body height factor, and the upper body length and the hip length factor were lower. It was analyzed as 'Long leg in the body'. Body type 2 is the 'narrow shoulder skinny type' with high hip and shoulder slope factors and low body size, body height, shoulder length, and width factor. Body type 3 showed body size, shoulder length, height and hip length factor, and body height factor was rather low 'low hip obese body shape'. Body type 4 was analyzed as 'lower shoulder long upper body type' with higher upper body length factor and lower body size and shoulder slope factor. It is thought that when the pattern is made, it is possible to produce excellent patterns by fitting the dimensions of the body, as well as the dimensions of the shoulder width, the slope, and the hip length.

• Tribology and Lubricants
• /
• v.38 no.6
• /
• pp.281-286
• /
• 2022

In this study, the effects of Elasto-hydrodynamic lubrication pressure on the critical shoulder height of raceway in an angular contact ball bearing were investigated. Both 3D contact analyses using an influence function and the EHL analysis were conducted for the contact geometry between the ball and raceways. The pressure distributions by 3D contact analysis and EHL analysis for an example bearing were compared. The effect of ellipse truncation on the minimum film thickness also investigated from EHL analysis. The critical shoulder height in the dry contact and the EHL state were compared for various applied loads. It is shown that when the ellipse truncation occurs, the pressure spike for the EHL conjunction is higher than that for the dry contact, and its location moves more inward of the contact center. The steep pressure gradients would increase the flow rate, so in order to maintain flow continuity a significant reduction in film thickness and an abrupt rise in pressure occurs in the edge of shoulder. Significant reduction of the minimum film thickness occurs near the edge of shoulder. The critical shoulder heights in the EHL state are calculated as higher values compared with in the dry contact. This results shows that the determination of critical shoulder height by the EHL analysis is more proper.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.4
• /
• pp.46-53
• /
• 2002

Push-pull strength has been found to be associated with various work factors such as height, distance, repetition, duration, posture and individual factors. Therefore, this study was performed to investigate the effect of various work factors on push-pull strength and muscle recruitment pattern. Work factors were consisted of grip height(elbow, shoulder), grip distance(100%, 50%, and 25% of maximum grip distance) and shoulder angle(neutral($90^{\cire}$), and abduction($45^{\cire}$, $0^{\cire}$)) during sitting work. The results showed that the normalized strength and EMG value were higher at the elbow height than the shoulder height, and increased with grip distance and shoulder adduction. The results of ANOVA showed that there was significant difference on muscle recruitment patterns among the task conditions. Therefore, it is necessary to consider work factors as well as strength to prevent workers from work-related injuries.

• Tribology and Lubricants
• /
• v.24 no.5
• /
• pp.228-233
• /
• 2008

In this study, the methodology for determination of shoulder height in the internal shape design of ball bearing using 3D contact analysis is proposed. The static analysis of a ball bearing was performed to calculate the distribution of applied contact load and angles among the rolling elements. From each rolling element loads and the contact geometry between ball and inner/outer raceway, 3D contact analyses using influence function are conducted. These methodology is applied to HDD ball bearing. A critical axial load and a critical shoulder height which are not affected by edge are calculated. The proposed methodology may be applied to other rolling element bearing for the purpose of reducing the material cost and improving the efficiency of the bearing design process.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.3
• /
• pp.563-575
• /
• 2024

This study analyzed 2D bodice sloper changes according to combinations of the lateral neck and shoulder points of a 3D mannequin's shoulder lines. The relationship between the 3D shape and 2D pattern was analyzed. The shoulder line was set to a default of 1cm in front of or behind the lateral neck point, 1cm in front or behind the lateral shoulder point and 1cm vertically above the lateral neck or shoulder point. When the lateral neck point was moved backward, the front neck depth, front and back shoulder height, and shoulder length in the 3D shape increased, whereas the back neck's depth and width decreased. In the 2D pattern, the back shoulder height decreased. As the lateral shoulder point moved backward, all items of the 3D shape showed little change. However, the front shoulder height for the 2D pattern decreased. Consequently, the back shoulder height increased, and the lateral neck point was raised vertically by 1cm. Meanwhile, only the back neck depth and shoulder length decreased while all other items increased; however, in the 2D pattern, the front neck width and shoulder line showed no notable change. The shoulder point was raised vertically by 1cm, and the front and back shoulder heights of the 3D shape and 2D pattern were decreased.