• Journal of the Korean Society of Safety
• /
• v.9 no.1
• /
• pp.161-164
• /
• 1994

Computer aided unloading elastic compliance method was employed to measure the closure and the length of short cracks. The most significant factor that influences the fatigue growth behavior of short cracks is the crack closure Phenomenon. dc/dN-$\Delta$ $K_{eff}$ relationships of short cracks are found to coincide well with the corresponding long crack relationships. Non-propagating behavior of short cracks at notch root can be predicted from the crack opening SIF of short cracks, $K_{op}$ , and the growth equation of long cracks in Region I and II.n Region I and II.I.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.4
• /
• pp.743-753
• /
• 2001

This paper proposed the sizing system for womens lower clothes. The sizing system was classified according to 4 body types and 5 age groups. The size intervals of waist girth, hip girth, stature, and slacks length were 3cm, 4cm, 8cm, and 5cm respectively. Frequency distribution analyzed with waist girth, hip girth, and stature showed that the most frequent sizes were 86-100-158 in the fattest-medium length H type, 77-92-158 in the fat-short M type, 68-92-158 in the balanced-long A type, and 65-88-158 in the balanced-medium length A type. The number of the sizes for lower clothes, which had frequencies more than 4∼5%, was 33 and each size was presented with slacks length, skirt length, thigh girth, and knee girth. Also frequency distribution analyzed with waist girth, hip girth, and slacks length showed that the most frequent sizes were 86-100-90 in the fattest-medium length H type, 74-96-90 in the fat-short M type, 68-92-90 in the balanced-long A type, and 65-88-90 in the balanced-medium length A type. The sizing system classified by age group had 21 cases in the early twenties, 21 cases in the late twenties, 18 cases in the early thirties, 16 cases in the late thirties, and 8 cases in the forties. This result will contribute to clothing fitness and efficient production.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.9 no.3
• /
• pp.136-147
• /
• 2009

In this paper we analyze the influence of source/drain (S/D) extension region design for minimizing short channel effects (SCEs) in 25 nm gate length single and double gate Silicon-on-Insulator (SOI) and Germanium-on-Insulator (GOI) MOSFETs. A design methodology, by evaluatingm the ratio of the effective channel length to the natural length for the different devices (single or double gate FETs) and technology (SOI or GOI), is proposed to minimize short channel effects (SCEs). The optimization of non-overlapped gate-source/drain i.e. underlap channel architecture is extremely useful to limit the degradation in SCEs caused by the high permittivity channel materials like Germanium as compared to that exhibited in Silicon based devices. Subthreshold slope and Drain Induced Barrier Lowering results show that steeper S/D gradients along with wider spacer regions are needed to suppress SCEs in GOI single/double gate devices as compared to Silicon based MOSFETs. A design criterion is developed to evaluate the minimum spacer width associated with underlap channel design to limit SCEs in SOI/GOI MOSFETs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.169-174
• /
• 2011

For a double-walled carbon nanotube resonator with a short outer nanotube, the free edge of the short outer wall plays an important role in the vibration of the long inner nanotube. For a double-walled carbon nanotube resonator with a short inner nanotube, the short inner nanotube can be considered as a flexible core, thus, the fundamental frequency is influenced by its length. In this paper, we analysis frequency variation in ultrahigh frequency nanomechanical resonators based on double-walled carbon nanotubes with different wall length. This results will widely apply to the realization of frequency devices controlling the length of the inner or outer nanotube.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.10
• /
• pp.24-31
• /
• 2003

Short channel effects (SCE) of bulk MOSFET with super-steep retrograded channels (SSR), fully-depleted SOI, and double-gate MOSFET have been analyzed using a evanescent-mode analysis. Analytical equations of the characteristics scaling-length (λ) for three structures have been derived and the accuracy of the calculated λ was verified by comparing to the device simulation result. It is found that the minimum channel length should be larger than 5λ and the depletion thickness of the SSR should be around 30 nm in order to be applicable to 70 nm CMOS technology. High-$textsc{k}$ dielectric shows a limitation in scaling due to the drain-field penetration through the dielectric unless the equivalent SiO2 thickness is very thin.

• The Journal of Korean Physical Therapy
• /
• v.34 no.4
• /
• pp.175-180
• /
• 2022

Purpose: Leg length discrepancy causes the posture deformation, gait asymmetry, and lower back pain. The purpose of this study is to investigate the correlation among functional leg length discrepancy (FLLD), muscle activity, muscle contraction onset time and vertical ground reaction force (vGRF) during simple lifting task. Methods: Thirty-nine subjects participated in this study. FLLD was measured from the umbilicus to medial malleolus of left and right leg using a tape. The subjects performed to lift a 10 kg box from the floor to chest. The muscle activity and muscle contraction onset time of rectus abdominis, erector spinae and rectus femoris was measured using EMG system and vGRF was measured by two force plate. Pearson correlation was used to fine out the correlation among FDDL, muscle activity, muscle contraction onset time and vGRF during simple lifting task. Results: Correlation between FLLD and difference of muscle activity of short-long side was very high (r>0.9) during simple lifting task. Correlation between FLLD and difference of muscle contraction onset time of short-long side was very high (r>0.9) during simple lifting task. And correlation between FLLD and difference of vGRF of short-long side was high (r>0.7) during simple lifting task. Conclusion: This study suggests that there is high correlation between FLLD and muscle activity, muscle contraction onset time, and ground reaction force during simple lifting task. Therefore, FLLD could negatively affect the postural balance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1189-1192
• /
• 2009

Short channel a-Si:H TFT devices with Cu electrodes have been investigated. Short channel TFTs are defined by new plasma etch process. When the channel length becomes shorter, the TFT characteristics (threshold voltage, off current, sub threshold voltage, etc.,) are degraded. These degraded characteristics can be improved through the hydrogen plasma treatment and new gate insulator structure. Using these processes, 15.0 inch XGA LCD panel was fabricated successfully where the channel length of the TFT devices was about 2.5 micrometers.

• Phonetics and Speech Sciences
• /
• v.9 no.2
• /
• pp.85-94
• /
• 2017

Conventional speaker verification systems using time delay neural network, identity vector and probabilistic linear discriminant analysis (TDNN-Ivector-PLDA) are known to be very effective for verifying long-duration speech utterances. However, when test utterances are of short duration, duration mismatch between enrollment and test utterances significantly degrades the performance of TDNN-Ivector-PLDA systems. To compensate for the I-vector mismatch between long and short utterances, this paper proposes to use probabilistic linear discriminant analysis (PLDA) model adaptation with augmented data. A PLDA model is trained on vast amount of speech data, most of which have long duration. Then, the PLDA model is adapted with the I-vectors obtained from short-utterance data which are augmented by using vocal tract length perturbation (VTLP). In computer experiments using the NIST SRE 2008 database, the proposed method is shown to achieve significantly better performance than the conventional TDNN-Ivector-PLDA systems when there exists duration mismatch between enrollment and test utterances.

• Nuclear Engineering and Technology
• /
• v.34 no.2
• /
• pp.105-116
• /
• 2002

In special industrial fields such 3s nuclear power plants and chemical plants, it is often necessary to repair system components without plant shutdown or drainage of system having many piping structures which may have hazardous or expensive fluid. A temporary ice plugging method for blocking internal flow is considered as a useful method in that case. According to the pipe freezing guideline of the nuclear power plant, the length of a freezing jacket must be longer than twice of the pipe diameter. However, for applying the ice plugging to short pipes which do not have enough freezing length because of geometrical configuration, it is inevitable to use shorter jacket less than twice of the pipe diameter. In this study, the integrity evaluation for short pipes in the nuclear power plant Is conducted by an experiment and the finite element analysis. From the results, the ice plugging process in short pipes can be safely carried out without any plastic deformation and fracture.

• The Research Journal of the Costume Culture
• /
• v.16 no.6
• /
• pp.1087-1098
• /
• 2008

The purpose of this study is to conduce the survey of three groups of college women living in different residential districts, Seoul, Gyeonggi-do and a district, each other, analyze the actual condition of wearing blue jeans, comparative investigate actual condition in each residential district of wearing blue jeans and cognition by change of crotch length and trend through comparison of cognition on dressed blue jeans with short crotch length. By which investigation, it was intended to understand their condition and propose of blue jeans as may offer fit with short crotch length. As the result of this study, it presented college women had hipbone blue jeans in order of $2\sim3$ and more than 4 in all of residential districts, they purchased hipbone blue jeans with crotch length in order of for middle crotch(23 cm) and short crotch(21cm) commonly in all of residential districts, and they care a lot for exposing back waist and hip of hipbone blue jeans without reference to residential district. They had a bad feeling for exposure, and as an alternative to deal with this, they answered mostly on 'wearing hipbone underwear' or 'wearing long upper garment', and there was significant difference between residential districts in silhouette and exterior fitness of crotch length among important factors when wearing hipbone blue jeans.