• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.70-73
• /
• 1992

This paper describes the modeling of human memory using a nerve field model which is proposed for modeling the mechanism of brain mathematically. In our model, two phases of memory, retention and recollection, are focused on. The former consists of two stages, short-term memory (STM) and long-term memory (LTM). The proposed model consists of three parts, the STM Layer, LTM Layer and the Intermediate Layer between them. Each of these is constructed by a nerve field. In the STM Layer, memorized information is retained dynamically in the form of the reverberating states of units within the layer, while in the LTM Layer, it is stored statically in the form of structures of the weight on the links between units. the Intermediate Layer is introduced to translate this dynamic representation in the STM Layer to the LTNI Layer, and also to extract the static information from the STM Layer. In addition to this, we consider the recollection of information stored in the LTM. Finally, the behavior of this model is demonstrated by computer simulation.

• 한국정밀공학회지
• /
• 제28권3호
• /
• pp.308-314
• /
• 2011

In micro electrochemical machining (micro ECM), machining conditions have been determined to maintain a small side gap and to machine a workpiece stably However, machining speed is slow. To improve machining speed while maintaining the form accuracy, the paper investigates machining parameters such as pulse amplitude, duty ratio, pulse on-time, and the electrolyte's temperature and concentration. The experiment in this study shows that the electrolyte's concentration is the key factor that can reduce machining time while maintaining the form accuracy Micro square columns were fabricated to confirm the machining parameters' effects.

• 한국과학교육학회지
• /
• 제14권2호
• /
• pp.236-240
• /
• 1994

Recently computers are transforming our classroom by means of initiating and expanding teaching and learning. Lloyd (1989) indicates that computers show great promise in a way augmenting the classroom instructional process under the guidance of the teacher. In this paper computer program for mineral identification (called CPMI) is introduced. This program is is to provide a short list of 26 minerals. These mineras are classified using some properties for mineral identification that is color, streak, hardness, specific gravity, luster, and crystal form. Mineral properties can be divided into two groups for operating this program: (1) properties with numeric values, that is hardness and specific gravity; (2) properties whith a single word, that is color, streak, luster, and crystal form.

• 감성과학
• /
• 제5권2호
• /
• pp.51-61
• /
• 2002

This study deals with Rhythm which is one of aesthetic variables. Aesthetics among the factors of consumer preference has been importantly considered in competitive market environment. Therefore , consumers' purchasing standard has been also changed as their consciousness has been changed according to the variation of their lire style. Besides, the technique and method of design faces up to the change because of consumers' diverse wishes. Hence, to satisfy consumers' needs and the market front now on characterized as the short durability cycle of products, a distinctive design should be developed in the form of products that can be an important factor to attract consumers preference. So, in this study, 1 will try to understand typology based on a categorization theory and the conceptual structure of aesthetics, which are importantly considered at the same time. In addition, I will establish a new design process by extracting Rhythm affecting aesthetic. Ultimately, this study aims develop more consumer preferring design beyond the limit of a designer's idea and design generation by the result of this study.

• 한방재활의학과학회지
• /
• 제25권4호
• /
• pp.65-74
• /
• 2015

Objectives The purpose of this study is to describe the origin of Wuqinxi and transition to various forms. Also evaluating the feasibility of Wuqinxi as a modern medical exercise. Methods For collecting data, various documents came from China, Taiwan, and Korea. Also we searched Pubmed, KISS, NDSL and National assembly library using "Wuqinxi (오금희)" for clinical trials. Results In this study, Chinese Wuqinxi can be divided into 10 forms, 15 forms, 18 forms, 20 forms, 30 forms and 40 forms while Taiwanese Wuqinxi can be divided into classic form (125 forms) and short form (84 forms). Also we found some evidence that Wuqinxi played a certain role for health promotion. Conclusions These days Wuqinxi has a 8 different major forms and some of the exercises can be used as a preventive medical exercise to promote health for people.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.329-334
• /
• 2011

The characteristic of sheet metal process is the few loss of material during process, the short processing time and the excellent price and strength. The static implicit finite element method is applied effectively to analyze stamping processes from using AutoForm software. The simulation analysis can be applied to the membrane elements and shell elements. Membrane elements can be applied to good efficiency, but lower than the accuracy of shell elements. Therefore, simple drawing process applies membrane element, and spring-back and analysis of stamping process are judged that it is most efficient that apply shell clement. This study, the simulated results for stamping processes are shown and discussed.

• 한국컴퓨터정보학회지
• /
• 제15권1호
• /
• pp.185-190
• /
• 2007

An image retrieval system is a piece of software that searches identical or similar images based on various image-specific features. This paper proposes a trademark image retrieval system that uses image colors and forms. In the proposed system, input images are segmented into several other regions, and color distribution histograms for different regions are extracted for use as color information. The proposed system uses form information through the preprocessing process such as boundary surface extraction, centroid extraction, angular sampling and, and through calculating the sums of the distances between the centroid and the boundary surfaces, standard deviations, and the ratios between long and short axes. Like this, the color and form information extracted is used to perform retrieval through measuring similarity.

• Bulletin of the Korean Chemical Society
• /
• 제33권4호
• /
• pp.1264-1267
• /
• 2012

We rationally designed and synthesized metallopolymers with organic 1,4-benzenedicarboxylic acid (BDC) linkers with different lengths of oxyethylene side chains in order to examine the influence of side chains on the coordination characteristics. While in a previous report the BDC linkers with alkyl side chains were found to form three-dimensional (3D) isoreticular metal-organic framework (IRMOF) structures or one-dimensional (1D) coordination polymeric structures with short $-O(CH_2)_6CH_3$ or long $-O(CH_2)_9CH_3$ side chains, respectively, new BDC linkers with oxyethylene side chains of the same lengths, $-(OCH_2CH_2)_2CH_3$ and $-(OCH_2CH_2)_3CH_3$, form only 3D IRMOF structures. This result is attributed to the higher flexibility and smaller volume of oxyethylene side chains compared to alkyl side chains.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.781-785
• /
• 2005

Cutting forces and tool deflection in end milling are represented as the closed form of tool rotational angle and cutting conditions. The discrete cutting forces caused by tool entry and exit are continued using the Fourier series expansion. Tool deflection is predicted by direct integration of the distributed loads on cutting edges. Cutting conditions, tool geometry, run-outs and the stiffness of tool clamping pan are considered for cutting forces and tool deflection estimation. Compared to numerical methods, the presented method has advantages in short prediction time and the effects of feeding and run-outs on cutting forces and tool deflection can be analyzed quantitatively. This research can be effectively used in real time machining error estimation and cutting condition selection for error minimization since the ferm accuracy is easily predicted by tool deflect ion curve.

• ALGAE
• /
• 제24권2호
• /
• pp.67-77
• /
• 2009

The marine phytoplankton diatom Thalassiosira species are described from the Korean coastal waters, based onobservations of Fine structutre of its frustules. As a fourth series, this study deals with 5 Thlassiosira species (T. decip-iens, T. ecgentrica, T. mala, T. nodulolinmta, and T. proschinae). The most striking features of these species are also theform and position of two processes on frustules. There is a central strutted process on valve face except T. nodvlolin-eata, which has a modified one on its center. The extemal tubes of marginal strutted processes are divided twoforms: "pile" form in T. decipiens and T. proschkinae, "short straw" form in T. eccentrica and T. nodulolineata. T. maladoes not present the extemal tubes in valve margin. The labiate processes are located in valve margin except T.proschkinae, which has it on valve face. Of theae, thrce species (T. mala, T. nodulineata at a final contentration of 5%and T. proschkinae were newly recorded in the coastal waters of Korea.