• Title/Summary/Keyword: shooting rate

Search Result 104, Processing Time 0.027 seconds

A Study on Atmospheric Turbulence-Induced Errors in Vision Sensor based Structural Displacement Measurement (대기외란시 비전센서를 활용한 구조물 동적 변위 측정 성능에 관한 연구)

  • Junho Gong
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.28 no.3
    • /
    • pp.1-9
    • /
    • 2024
  • This study proposes a multi-scale template matching technique with image pyramids (TMI) to measure structural dynamic displacement using a vision sensor under atmospheric turbulence conditions and evaluates its displacement measurement performance. To evaluate displacement measurement performance according to distance, the three-story shear structure was designed, and an FHD camera was prepared to measure structural response. The initial measurement distance was set at 10m, and increased with an increment of 10m up to 40m. The atmospheric disturbance was generated using a heating plate under indoor illuminance condition, and the image was distorted by the optical turbulence. Through preliminary experiments, the feasibility of displacement measurement of the feature point-based displacement measurement method and the proposed method during atmospheric disturbances were compared and verified, and the verification results showed a low measurement error rate of the proposed method. As a result of evaluating displacement measurement performance in an atmospheric disturbance environment, there was no significant difference in displacement measurement performance for TMI using an artificial target depending on the presence or absence of atmospheric disturbance. However, when natural targets were used, RMSE increased significantly at shooting distances of 20 m or more, showing the operating limitations of the proposed technique. This indicates that the resolution of the natural target decreases as the shooting distance increases, and image distortion due to atmospheric disturbance causes errors in template image estimation, resulting in a high displacement measurement error.

Evaluation on the stress using HRV according to elapsed time of MRI noise (HRV를 이용한 자기공명영상 소음의 시간 변화에 따른 스트레스 평가)

  • Ye, Soo-Young;Kim, Dong-Hyun
    • Journal of the Institute of Convergence Signal Processing
    • /
    • v.16 no.2
    • /
    • pp.50-55
    • /
    • 2015
  • The noise of MRI shooting is 100dB loud and has an intensive psychological and physiological influences on the human body. ECG signals were measured by experimental methods, while wearing earplugs for 15 minutes in the stable state. Then the ECG signals were measured for 30 minutes while listening to about 100dB of sound in a MRI equipment. In this study, the heart rate variability of men and women was analyzed according to the MRI noise stress level through the frequency analysis. As the MRI noise level is about 100dB, HRV analysis resulted in an imbalance between the sympathetic and parasympathetic. During the period from the resting state up to 10 minutes, the maximum stress state was shown. This study will encourage MRI workers to take interests in hearing protection for the patient and to make objective indicators about MRI noises.

A Study on Usability Improvement of Camera Application of Galaxy S7 (갤럭시S7의 카메라 어플리케이션 사용성 개선에 관한연구)

  • Yu, Sung-ho;Lim, Seong-Taek
    • Journal of the Korea Convergence Society
    • /
    • v.8 no.12
    • /
    • pp.249-255
    • /
    • 2017
  • Recently, among smart phone functions, cameras are one of the most popular functions and have become one of the most influential functions for purchasing smartphones. However, the basic camera application of the smart phone has a complicated user environment, which is causing many difficulties for the first time user. In this study, Galaxy S7, which is the newest Galaxy S series among the most used Galaxy S series in Korea, was selected and the usability test of the camera application was limited to shooting and editing sharing functions. As a result, first, improvement of icon graphic and label of text form should be provided at the same time to increase the recognition rate and attention of the icon. Second, it is necessary to simplify the structure and provide an intuitive interface in order to facilitate access to various modes and functions. Third, it is necessary to simplify the provision of personalized customized menus or functions in the development of the camera application because it causes a high failure rate and inconvenience in the special functions which are not widely used.

Removal of RDX using Lab-scale Plug Flow Constructed Wetlands Planted with Miscanthus sacchariflorus (Maxim.) Benth (물억새를 식재한 플러그 흐름 습지에서의 RDX 제거동역학)

  • Lee, Ahreum;Kim, Bumjoon;Park, Jieun;Bae, Bumhan
    • Journal of Soil and Groundwater Environment
    • /
    • v.20 no.6
    • /
    • pp.85-94
    • /
    • 2015
  • RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine) is the most important explosive contaminant, both in concentration and in frequency, at military shooting ranges in which green technologies such as phytoremediation or constructed wetlands are the best option for mitigation of explosive compounds discharge to the environment. A study was conducted with two identical lab-scale plug flow constructed wetlands planted with Amur silver grass to treat water artificially contaminated with 40 mg/L of toxic explosive compound, RDX. The reactor was inoculated with or without RDX degrading mixed culture to evaluate plant-microorganism interactions in RDX removal, transformation products distribution, and kinetic constants. RDX and its metabolites in water, plant, and sediment were analyzed by HPLC to determine mass balance and kinetic constants. After 30 days of operation, the reactor reached steady-state at which more than 99% of RDX was removed with or without the mixed culture inoculation. The major transformation product was TNX (Trinitroso-RDX) that comprised approximately 50% in the mass balance of both reactors. It was also the major compound in the plant root and shoot system. Acute toxicity analysis of the water samples showed more than 30% of toxicity reduction in the effluent than that of influent containing 40 mg/L of RDX. In the Amur silver grass mesocosm seeded with the mixed culture, the specific RDX removal rate, that is 1st order removal rate normalized to plant fresh weight, was estimated to be 0.84 kg−1 day−1 which is 16.7% higher than that in the planted only mesocosm. Therefore, the results of this study proved that Amur silver grass is an effective plant for RDX removal in constructed wetlands and the efficiency can be increased even more when applied with RDX degrading microbial consortia.

Effect of Basal Medium and Plant Growth Regulator on in vitro Plant Regeneration from Axillary Buds of Walnut New Cultiver "Sinlyeong"

  • Kwon, Young Hee;Lee, Joung Kwan;Kim, Hee Kyu;Kim, Kyung Ok;Park, Jae Seong;Huh, Yoon Sun
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2019.10a
    • /
    • pp.15-15
    • /
    • 2019
  • The walnut (Juglans regia L.), a member of the Juglandaceae, is native to the mountain ranges of central Asia. This species of walnut is valued commercially for its nuts and in some areas for its timber. The seeds of walnut are recalcitrant and it has strong integument dormancy and their germination is irregular, making its natural propagation difficult. Low percentage of seed germination and long propagation cycle are the main problems of propagation. This study was conducted medium composition on in vitro plantlet regeneration from axillary buds of walnut. It has proved to be the most generally applicable and reliable method of in vitro propagation. Micropropagation culture that axillary buds are excised aseptically enables faster multiplication of plants. The axillary buds of walnut new cultivar "Sinlyeong" were cultured on two basal media which contained the different plant growth regulators depending on the respective shooting and rooting stage. After 12 weeks, the shoot generation rate was 85.3%, the shoot number and its length were 1.9/explant and 2.7 cm in the most favorable medium composition. The percentage of rooting was 25.4%. From these results, it was found the optimum basal medium and plant growth regulator for in vitro plant regeneration from axillary buds of walnut new cultivar "Sinlyeong". However, we have continued to search the other medium additives to enhance the rate of walnut root.

  • PDF

The effect of application time of fertilizer nitrogen on its uptake rate and distribution in rice plant (질소(窒素) 시용시기별(施用時期別) 질소흡수율(窒素吸收率)과 수도체내(水稻體內)의 분포(分布)에 관한 연구(硏究))

  • Shim, Sang Chil;Kim, Tai Soon;Song, Ki Joon
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.7 no.2
    • /
    • pp.113-118
    • /
    • 1974
  • A study was carried out to investigate the effect of application time of fertilizer nitrogen on its rate of uptake and its distribution in rice plant. The rate of applied fertilizer was 100kg/ha, as a single application at transplanting time and four equal split applications of 25kg/ha was applied at transplanting time, 3 weeks after transplanting, 1 week before the primodial initiation stage of growth and at the flag leaf stage of growth, respectively. The ammonium sulfate was labelled with N-15, as 1% atom excess for single application and 4.4% atom excess for split applications. The results are sumarized as follows: 1. The effect of split application of nitrogen on yield was observed. The yield of brown rice of the single application at transplanting time was 3.1 ton/ha and the split application was 3.4 ton/ha. However, without nitrogen the yield was reduced to 1.9 ton/ha. 2. The number of grains per panicle and 1000 grains weight were increased as split application of nitrogen, but for the number of panicles per hill and maturing rate, the single application of nitrogen revealed favorable results. 3. The rate of uptake of applied fertilizer nitrogen showed a tendency that the efficiency of fertilizer nitrogen increased by top dressing. The rate of uptake of applied nitrogen as basal application, first top dressing, second top dressing and third top dressing was 28%, 33% 51% and 63%, respectively. 4. After shooting stage of the growth, nitrogen in straws transfered to grains. The nitrogen applied at flag leaf stage was absorbed by root and easily accumulated in grains rather than straw.

  • PDF

Physio-ecological Characteristics of Sagittaria trifolia L., a Perennial Weed in Paddy Field 1. Effect of Environmental Factors on Emergence of Tuber of S. trifolia (논 다년생잡초(多年生雜草) 벗풀의 생리생태적(生理生態的) 특성(特性)에 관한 연구(硏究) - 1. 벗풀 지하경(地下莖)의 출아특성(出芽特性))

  • Han, S.S.;Ryang, W.J.
    • Korean Journal of Weed Science
    • /
    • v.12 no.1
    • /
    • pp.8-15
    • /
    • 1992
  • Arrowhead (Sagittaria trifolia L.), a perennial weed dominant in paddy field, is considerably difficult to control by herbicides. The investigation on the effects of environmental factors on emergence of arrowhead tuber can aid for controlling this weed. The results exmined were as follows : From the results of emergence characteristics at different levels of temperature, arrowhead tuber could germinated at 15$^{\circ}C$-40$^{\circ}C$. The optimal temperature for basal emergence was ranged from 25 to 30$^{\circ}C$. Basal emergence at 15$^{\circ}C$ and 20$^{\circ}C$ began at 56 and 12 days after tuber plantation, respectively and were later than those at the optimal temperature. At the different levels of shading, all the tested tubers could emerged. The days required for basal emergence at 25% and 50% shading plots were shorter than those at 70%, 80% and non-shading plots. The basal emergence was more effective under blue and clear films than any other phyto-selective materials. Some of arrowhead tubers could not emerged under green, red and yellow films. On the soil pH, the basal emergence was best at soil pH 6.0 and 7.0. At soil pH 4.0, 5.0 and 8.0, the required days for emergence were longer than those at soil pH 6.0 and 7.0 and some of tubers could not emerged. Arrowhead tubers more then 0.5 g showed the shorter shooting days than those less than 0.5 g. Tubers were able to emerge at water depth ranging from 0 to 20 cm. At 3 cm and 5 cm water depth, the required days for basal shooting were shorter than those at any other levels of water depth. The emergence of basals was best at molding depth of 0 cm, and the rates at 3 to 5 cm of plantation depth were decreased. At 10 cm plantation depth, the shooting rate was significantly decreased.

  • PDF

Studies on the improvement of the productivity of purse seine fishery-III - The characteristics on the motion with the flow velocity of model purse seine of the subjective power block and triplex during pursing - (선망어업의 생산성 향상에 관한 연구-III - 죔줄 체결시 파워불록과 트리플랙스용 선망 모형의 유속에 따른 운동특성 -)

  • Kim, Suk-Jong
    • Journal of the Korean Society of Fisheries and Ocean Technology
    • /
    • v.43 no.1
    • /
    • pp.12-27
    • /
    • 2007
  • This fundamental studies on for the productivity improvement and laborsaving of purse seine fishery. Given the difficulty posed from the distortion of net shape caused by the external forces, such as tide, at the time of shooting and pursing, we set the 4 steps of 0, 2, 4 and 6cm/sec in flow velocity in the flume tank for the experiment in order to examine those characteristics. We used two model seines designed on the scale of 1 to 180 based on the power block seine, which is the mackerel purse seine generally used in the near sea of Jeju Island and triplex seine, which is the mackerel purse seine of one boat system fishing expected in the future, for the experiment, and interpreted the characteristics of several motion in water, such as the shape of seine, the change in tension and area during pursing and its the analysis results are as follows. Though the experiment could be conducted up to 6cm/sec of flow velocity that was defined, the experiment could not go on because of the severe distortion in the seine at the flow velocity in excess of 6cm/sec. As for the depth of leadline and reduction rate of side area of seine when the pursing is connected, P seine turned out to be slightly higher than T seine, and the hauling speed and reduction rate of upper area of seine were found similar to each other. The correlation between the hauling time (Ht) and depth of lead line (Dhp, Dht) of P seine and T seine can be expressed by the equation, that is, Dhp=(0.99Pt-7.63)Pt+69.01, Dht=(1.03Pt-7.73)Pt+66.74. The correlation between the hauling time and hauling velocity (Hpp, Hpt) can be expressed by the equation, that is, $Hpp=-0.06Ht^2+0.88Ht+0.78,\;Hpt=-0.05Ht^2+0.81Ht+0.98$ here, Pt is pursing time. And the correlation between the pursing time and the reduction rate of side area (sArp, sArt) can be expressed by the equation, that is, $sArp=-0.48Pt^2+14.79Pt-16.74,\;sArt=-0.45Pt^2+14.56Pt-16.48$. The reduction rate of upper area of seine (tArp, tArt) can be expressed by the equation, that is, $tArp=0.34Pt^2-0.66Pt-0.74,\;tArt=0.34Pt^2-0.27Pt-1.80$. In addition, the correlation between the pursing time and tension of purse line (Tep, Tet) can be expressed by the equation, that is, $Tep=2.79Pt^2+2.26Pt-0.60,\;Tet=2.14Pt^2+8.08Pt-27.50$.

A Study on the Relation Characteristics between Bubble Size Distribution and Floating Time (버블의 크기별 입도분포와 부상시간과의 상관특성에 관한 연구)

  • Jeon, Gun;Park, Chul-Hwi
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.39 no.5
    • /
    • pp.277-281
    • /
    • 2017
  • Lately rainfall characteristics that it rains a lot in a short space of time often occurs. Because of this meteorological phenomena, the flow rate and concentration of initial rainfall for runoff and combined sewer overflows are changed. In the case of this inlet fluctuation, the flotation method at high surface loading rate is suitable for water quality management. the flotation method is able to meet the removal rate requirements of water public zone in 5 to 10 min which is irelatively short period. For assessment and diagonision of flotation method, A/S ratio is applied until now. But unfortunately, this has some limits for evaluation standard for certification and assessment of technical diagnosis and operation. This is why there is different efficiency in the bubble distribution at the same A/S ratio. The velocity and time of floating is changed by the different bubble distributions. The floating time affects the plant volume because the time factor make size dicision. Therefore the charateristics of bubble distribution and floating time at the same A/S ratio is necessary to apply to evaluation standard for certification and assessment of technical diagnosis and operation. For generalization of the method in certification and assessment, the characteristics of bubble distribution was studied. Until recently, using the optical device and shooting live video, there are some analysis technology of the floating factors. But this kind of technology is influenced by the equipment. with this level of confidence about the results, it is difficult to apply to generalize. According this reasons, this study should be applied on experiment generalization of method about measurement of relation between bubble distribution and floating time.

Development of automatic pipe grading algorithm for a diagnosis of pipe status (관로상태 진단을 위한 자동 관로 등급 판정 기법 개발)

  • 이복흔;배진우;최광철;강영석;유지상
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.6C
    • /
    • pp.793-800
    • /
    • 2004
  • In this paper, we propose a new automatic pipe grading algorithm for an efficient management of transmission pipe under the ground. Since the conventional transmission pipe evaluation was conducted by subjective decision made by an individual operator, it was difficult to grade them by means of numerical methods and also hard to realistically construct numerical database system. To solve these problems, we Int obtain some information on the current condition of pipes' sections by shooting laser beam at a regular rate and then apply grading algorithm after complete calculation of minimum diameter of pipe. We use some of preprocessing techniques to reduce noise and also use various color models to consider special conditions of each inner pipe. The measurement of pipes' minimum diameter and decision of grade are performed through a detailed processing stages. By some experimental results performed in the field, we show that over 90 percent of correct grade decisions are made by the proposed algorithm.