• Journal of Biosystems Engineering
• /
• v.19 no.1
• /
• pp.17-21
• /
• 1994

This reasearch was performed to provide the fundamental intonation for the mechanization of Korean pine cone harvest when the shoot shearing method is adopted. Shear force and stress of pine cone shoots were measured and analyzed for this purpose. Samples are selected along their harvesting time and tested in 17 levels of shoot diameter from 10 to 26mm with 1mm increment. 1) Shear force-deformation characteristics showed that shoot reached its rupture point after 2 to 4 of bio-yield points. It was supposed that these multiple bio-yield points were caused by the discrete compression of wood parts which are composed of water, nutrient, resin, etc. 2) Required shear force to shear shoot was proportional to the square of shoot diamter, however, shear force for shoots of early harvesting time(Aug. 31) was proportional to the shoot diameter. Variance of shear force was increased as the harvesting time was delayed. Shear forces were distributed from 468N(Aug. 31, 12mm dia) to 4153N(Aug. 31, 26mm dia) disregarding the sampling date. 3) The average shear stresses by sampling dates were 744,822, and 883N/m2, respectively, and for the earlier shoot samples shear stress was quite smaller than the others. Shear stress was proportional to shoot diameter squared, and the effect of shoot diameter on the shear stress was decreased as harvesting time was delayed.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.16 no.2
• /
• pp.105-114
• /
• 2013

This study was carried out to find growth increasing methods of Rhododendron mucronulatum in Mt. Biseul. 4 treatments(heavy pruning, light pruning, non-pruning+fertilization, non-pruning(control)) were used in the study area with different pruning methods. Growth characteristics of new shoot, number of creation of flower buds and leaf buds in new shoot were analysed. Significant differences were observed among the treatments and stem diameter degree. Diameter, length of new shoots and the number of flower buds, leaf buds per new shoots increased in the pruning treatments. But heavy pruning showed more effective growth increasing way than light pruning. Non-pruning and fertilization treatments were not effective to increase growth of Rhododendron mucronulatum. And pruning at the end of May was the most effective way for growth of new shoot.

• Journal of Forest and Environmental Science
• /
• v.33 no.2
• /
• pp.97-104
• /
• 2017

Investigation was carried out on response of Tetrapleura tetraptera (Schum. and Thonn.) to soil, water and light with the view of its domestication and introduction to different ecological regions. The experiment was arranged in a factorial experiment of $3{\times}3{\times}3$ in a completely randomized design (CRD) with three replicates. The factors were: soil textural class (Loamy sand, Sand and Sandy clay loam), watering regime (daily, twice a week and once a week) and light intensity (100%, 75% and 50%). Soil textural classes had significant influence on collar diameter, stem height, number of leaflets, root/shoot ratio and relative growth rate of Tetrapleura seedlings. Seedlings grown on loamy sand recorded the highest mean value- 2.28 mm for collar diameter, stem height- 12.9 cm, number of leaflets- 19.9, chlorophyll b- $0.34mg\;mL^{-1}$, leaf relative water content- 27.4% and relative growth rate- $0.037mg\;g^{-1}\;day^{-1}$. Watering regime had significant influence on the collar diameter of Tetrapleura. Seedlings watered daily recorded the highest mean value- 2.25 mm for collar diameter. Light intensity significantly influenced collar diameter and root/shoot ratio. Seedlings exposed to 100% light intensity recorded higher mean value for collar diameter- 2.28 mm and root/shoot ratio- 1.481 cm. The interaction between soil textural class and light intensity significantly affected collar diameter, stem height and number of leaflets. Higher mean value for collar diameter (2.47 mm) stem height (13.25 cm) and number of leaflets (21.16) were recorded while the interaction between soil textural class, light intensity and watering regime was significant for only number of leaflets. Tetrapleura exhibited some level of tolerance to different soil texture, drought and light intensity. Therefore, Tetrapleura has the potentials to be raised in different ecological zones characterized by difference in soil, rainfall and amount of sunshine.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.421-426
• /
• 2014

To investigate the optimal size of fruit bearing branches (FBBs) of 'Kawanakajima Hakuto' peach (Prunus persica Batsch) for production of high quality fruits, we evaluated shoot growth and fruit characteristics relative to FBB direction and thickness. FBB diameter, shoot length, fruit weight, and soluble solids content (SSC) averaged 6.9 mm, 32.6 cm, 333.6 g, and $11.2^{\circ}Brix$, respectively. Coefficients of variation of FBB diameter and shoot length were high as 35.8% and 75.3%. The highest frequency values revealed that 76.4% of FBBs had a diameter below 9.0 mm, 70.0% of shoot lengths were less than 40 cm, 24.8% of fruits were 310-340 g, and 66.9% of SSCs were $10.5-12.5^{\circ}Brix$. Shoot length and SSC were significantly affected by FBB diameter without direction, and fruit weight was significantly affected by interaction of FBB diameter and direction. There was a negative correlation ($r^2=0.094^*$) of FBB diameter and fruit weight with upward FBB directions, whereas FBB diameter and fruit weight were positively correlated ($r^2=0.246^{**}$) with downward FBB direction. With thick FBB diameter, shoot length, and SSC were significantly increased, but fruit weight was decreased. Therefore, downward FBBs below 9.0 mm in thickness are suitable for producing high-quality fruits of 'Kawanakajima Hakuto' peach.

• Journal of agriculture & life science
• /
• v.45 no.6
• /
• pp.9-19
• /
• 2011

This study aimed to investigate the effect of night temperature on tomato and grafted watermelon seedlings, particularly, shoot height, leaf area, stem diameter, and total dry weight and relationship among the growth parameters which are used to evaluate healthy seedling. Plants were grown at 10, 15, and $20^{\circ}C$. Leaf area index (LAI) and total dry weight of tomato seedlings weight deceased more significantly under $10^{\circ}C$ than other night temperature regimes. In grafted watermelon seedlings, shoot height increased shapely and stem diameter decreased under $20^{\circ}C$. Increasing the integral temperature, leaf area of tomato seedlings under $10^{\circ}C$ decreased and shoot height of grafted watermelon seedlings increased although temperature integrals are same. The relationships among the growth parameter were changed upon the night temperature. Stem diameters of tomato seedlings had upward tendency with increase of shoot height, but there were no significant differences among night temperature regimes. Shoot hight of grafted watermelon seedlings had no relationship with shoot height. These results indicate that shoot height and stem diameter of tomato seedlings is not appropriate for assessing seedlings quality but shoot height of grafted watermelon seedlings with stem diameter is available.

• Journal of Korean Society of Forest Science
• /
• v.2 no.1
• /
• pp.48-51
• /
• 1962

1. The analysis of the shoot height growth of Phyllostachys edulis A. et C. Rivi$\acute{e}$re which stand is growing at the middle part of South Korea is presented in the present paper. The shoot height was carefully measured twice a day, 10 am and 4 pm. With this, six hours from 10 am to 4 pm is regarded as day-time-length and 18 hours of the rest as night-length. 2. The measurement were made in 1954. The very young shoots were classed into three diameter groups basing at the ground surface level to see the the afterwards influences of shoot size on height growth. 3. The hourly mean height growth in day time was higher than that in night time. The standard deviations and coefficients of variations of the daily growth of the shoot are presented in Figures 2 and 3 respectively. 4. The hourly mean height growth of the shoot by diameter groups and by day and night period are presented in Fig. 4 and 5 respectively. 5. The growth percentages of the shoot by diameter groups and by day and night is graphed in Fig. 6.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.66 no.2
• /
• pp.112-119
• /
• 2021

In order to develop a safe seeding technology for low-density transplantation, we analyzed the changes in seeding growth according to different seeding rates and seeding days. We detected changes in leaf number and shoot diameter on the 10th seeding day, and in plant height on the 20th seeding day according to seeding rate. The increase in shoot and leaf number, and shoot diameter per seeding day decreased with anincrease in seeding rate. On seeding day 20, the reductions in shoot and root dry weights according to seeding rate was lower compared with those recorded at seeding day 10. Shoot dry weight was significantly related to root dry weight, plant height, and shoot diameter. With an increase in seeding rate, seeding health decreased and there was an increase in the rate of seeding health per seeding day decreased. For low-density transplantation, the optimal number of seeds required for transplanting 3-5 plants per hill is 11,000, which is estimated to be approximately 280-300 g of seeds for 22 g brown rice. Furthermore, the appropriate number of seeding days is estimated to be 13 to 16 days, which corresponds to a small reduction in seeding health.

• The Plant Pathology Journal
• /
• v.19 no.6
• /
• pp.288-290
• /
• 2003

Shoot blight of suckers of common lilac plants (Syringa vulgaris) was found in an apartment garden in Daegu, Korea. The causal organism was a species of Phytophthora, which was homothallic with paragynous antheridium. Oogonia were globose and measured 21.5-34.0 $\mu\textrm{m}$ with an average of 29.7$\pm$3.2 $\mu\textrm{m}$ in diameter. Oospores in oogonia were round, light orange brown when mature, mostly plerotic, and measured an average of 25.6$\pm$3 $\mu\textrm{m}$ in diameter. Antheridia were ovoid and around 11.7$\times$7.8 $\mu\textrm{m}$. Sporangia seldom formed on agar media but formed abundantly in water. Sporangia that formed in water were semipapillate, ovoid obpyriform, non-caducous, and 23.4-66.3$\times$17.6-37.1 $\mu\textrm{m}$ in dimension with I/b ratio of 1.46. The causal organism was identified as Phytophthora citricola Sawada on the basis of morphological characteristics. This is the first report of shoot blight caused by P. citricola Sawada in lilac suckers in Korea.

• Journal of Biosystems Engineering
• /
• v.20 no.3
• /
• pp.245-249
• /
• 1995

In this study power requirements to saw shoots with circular saw were determined by measuring and analyzing the required maximum torque to provide the information for the mechanization of Korean pine cone harvest. Two levels of feed rate of shoots, 10.4mm/s and 20.8mm/s, three levels of sawing speed 5.8㎧, 11.6㎧, and 17.4㎧, and 14 levels of shoot diameter from 7.7 to 18.1mm were used as variables. 1) The maximum torques were significantly affected by all three variables. The average maximum torque, 18.2 N-cm for feed rate of 20.Bmm/s was greater as much as 80% of 10.1 N-cm for feed rate of 10.4mm/s. 2) As the sawing speed was increased from 5.8㎧ to 11.6㎧ and 17.4㎧, the maximum torques were decreased to 14.8N-cm, 8.5N-cm, and 7.IN-cm, respectively when the feed rate was 10.4mm/s. The maximum torque ranged from 4.5 to 19.3N-cm as shoot diameter increased from 7.7 to 18.1mm. The minimum power requirements to saw shoots of 18.1mm with circular saw was 30W for the feed rate of 10.4mm/s. 3) The maximum torques were 28.6N-cm, 14.6N-cm, and 11.4N-cm when sawing speeds were 5.8㎧, 11.6㎧, and 17.4㎧, respectively when the feed rate was 20.8mm/s and these torques were increased as much as 93%, 36%, and 61% of those for the feed rate of 10.4mm/s. The maximum torque increased from 9.7N-cm to 30.7N-cm as shoot diameter increased from 7.7 to 18.1mm. The minimum power requirements to saw shoots of 18.1mm was 54W which was 1.8 times of 30W for the feed rate of 10.4mm/s.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.4
• /
• pp.256-261
• /
• 2009

This study was carried out to examine the effects of cutting condition on the rooting and their subsequent growth of cut flower in plug cutting of summer-flowering chrysanthemum 'Iwanohakusen'. The more leaves were attached to the cutting, the higher shoot growth and rooting were. Shoot growth of cuttings was not affected by cutting length, but rooting was better in over 5 cm long cutting. Shoot growth was enhanced by increasing thickness of cutting, and 5.5 mm thick cutting was favored in rooting. When the many leaves were attached on the cutting, the length and weight of cut flower increased. Over 7 cm long cutting showed higher values in growth of cut flower and ray flower number. Cutting of 5.5 mm diameter showed more favorable growth of cut flower than the other treatments. Therefore, it is concluded that rooting of cutting and consecutive growth of cut flower was improved when 7 cm long and 5.5 mm diameter cutting with 4 leaves was used in plug cutting of chrysanthemum 'Iwanohakusen'.