• 한국항공우주학회지
• /
• 제37권1호
• /
• pp.1-16
• /
• 2009

최근 공학적으로 응용 범위가 넓은 액체-기체의 2상 유동장에 대한 전산 해석이 주목을 받고 있다. 본 연구에서는 밀도차가 큰 압축성 2상 유동장을 해석하기에 적합하도록 기존에 개발된 RoeM과 AUSMPW+ 공간 이산화 기법을 확장하였다. RoeM과 AUSMPW+에서 사용되는 충격파 포착항을 2상 혼합류의 상태방정식으로부터 새롭게 정의하여, 밀도와 음속이 상이한 두 유체에서도 정확성을 보장하면서 충격파 불안정성을 제거할 수 있도록 하였다. 개발된 2상 유동 RoeM과 AUSMPW+를 몇 가지 예제 문제에 적용하여 검증하였으며, 해석 결과는 두 수치기법이 일반적인 2상 유동에서도 충격파 안정적이며 정확한 특성을 갖는 것을 보여주었다.

• 항공우주기술
• /
• 제3권2호
• /
• pp.191-196
• /
• 2004

현재까지의 착륙장치의 연구동향은 대부분이 공기-유압식 완충기의 충격흡수 성능해석에 집중되어 있으며 이러한 연구내용을 판스프링식 복합재료 착륙장치의 해석에 적용하기에는 많은 문제점이 있는 실정이다. 공기-유압식 완충기의 충격흡수 특성은 착륙장치 구조물의 유연성보다 내부 구조의 설계 방식에 따라 영향을 받으나, 판스프링식 복합재료 착륙장치는 재료 자체가 지니는 탄성거동과 감쇠특성으로 충격흡수 역할을 수행한다. 따라서 구조물을 구성하는 재료의 선정 및 형상이 매우 중요하다. 본 연구에서는 실제 착륙장치의 충격 낙하 상태를 정확히 모사 할 수 있는 시험치구를 이용하여 현재 개발 중에 있는 고정식(fixed)복합재료 착륙장치가 갖고 있는 충격흡수특성, 탄성거동 및 감속특성 등을 파악하였다.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.478-483
• /
• 2009

Thermal shock and hot corrosion resistance of silicon nitride ceramics are investigated in this study. Silicon nitrides are fabricated by nitride pressureless sintering (NPS) process, which process is the continuous process of nitridation reaction of Si metal combined with subsequent pressureless sintering. The results of thermal shock test show it sustains 400MPa of initial strength during test in the designated condition of ${\Delta}T=700{\sim}25^{\circ}C$ up to maximum 4,800 cycles. Hot corrosion tests also reveal that the strength degradation of NPS silicon nitride did not occur at $700^{\circ}C$ with an exposure in Ar, $H_2$, Na and K for 1,275 h.

• 한국추진공학회지
• /
• 제22권5호
• /
• pp.97-106
• /
• 2018

본 논문은 충격파 터널을 이용한 이중압축램프 흡입구 형상의 모델 스크램제트 시험에서 나타난 기술적 난제 및 그 해결 방안들을 정리하였다. 시험 설비 불시동, 격막 파편에 의한 유동 교란 및 모델 손상, 다중 분사에 따른 연료 제트 미발달, 그리고 짧은 시험 시간이 이에 해당한다. 파악된 기술적 난제들을 해결한 이후, 개선된 결과를 쉐도우그래프 이미지 및 저압관 끝단 전압력 측정 결과를 통해 확인하였다.

• 산업기술연구
• /
• 제24권A호
• /
• pp.9-15
• /
• 2004

The flexural strength from 3-point bend test and fatigue properties were measured to evaluate mechanical properties of metal/ceramic interface of the multilayer ceramic package produced through tape casting. From the results, the specimens with three electrode layers showed the highest strength. The temperature distribution with time during thermal cycle and thermal stresses with the change of electrode's shape have been estimated by mathematical modelling. Specimen affected by thermal shock, produced microcracks by the difference of thermal expansion coefficient. The results of tensile test and fatigue test showed the rupture at pin. The fact that the pin brazed specimens were always fractured at the pin proved the good bonding condition between pin and electrode.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1538-1541
• /
• 2005

For reliability evaluation of AC-PDP, one of the most important factor is sealing property. In this paper, the reliability evaluation test method of the commercialized sealing glass frit in AC-PDP was studied. 6 inch AC-PDP panels were tested for evaluation of sealing glass frit by vibration shock test, thermal shock test, non -destructive X-ray inspection, residual stress inspection and residual gas detection. These test methods are proposed as a standard for testing the reliability of sealing glass frit. The main failure mode of sealing glass frit in AC-PDP seems to be the crack propagation from thermal cycling rather than mechanical factor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1772-1777
• /
• 2000

The Combat Computer Consoles installed in surface ships should endure harsh environment such as vibration from engine or propeller and shock from underwater explosion. Generally, commercial isolation mounts are selected and used for anti-vibration and anti-shock design. In this research, the environment of the Combat Computer Console was analyzed first. Selected proper mount was modeled and computer simulation was performed to emulate the environment test. The real environment test was conducted with a manufactured Combat Computer Console. The test results were same as the simulation and satisfied the performance requirements. The computer simulation proved to be a useful design tool to predict the performance before the final environment test.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.602-613
• /
• 2015

As one of the mission payloads to be verified through the cube satellite mission of Cube Laboratory for Space Technology Experimental Project (STEP Cube Lab), we developed a hinge driving separation nut-type holding and releasing mechanism. The mechanism offers advantages, such as a large holding capacity and negligible induced shock, although its activation principle is based on a nylon cable cutting mechanism triggered by a nichrome burn wire generally used for cube satellite applications for the purpose of holding and releasing onboard appendages owing to its simplicity and low cost. The basic characteristics of the mechanism have been measured through a release function test, static load test under qualification temperature limits, and shock measurement test. In addition, the structural safety and operational functionality of the mechanism module under launch and on-orbit environments have been successfully demonstrated through a vibration test and thermal vacuum test.

• 전기학회논문지
• /
• 제66권7호
• /
• pp.1155-1161
• /
• 2017

This study examines environmental performance of the arcing measurement module according to international standards. The module assesses the collected current performance using a computer system. The module is required to assess environmental impact resulting from electromagnetic waves, shock and temperature change during train operation. The test includes testing EMI/EMC, vibration, shock and temperature cycling for interface between trains and the arcing measurement module. The module test items were determined in compliance with the standards suggested by the International Electrotechnical Commission (IEC) and Europaische Norm (EN). This study describes the method of test, test equipment operation and how to choose relevant performance standards. The analysis and test results of environmental performance for the module based on computer system are described in this study.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.747-750
• /
• 2004

After launching, spacecraft is exposed to extreme environments. So spacecraft should be tested after design/manufacture to verify whether components can be operated functionally. Acceleration transferred from launch vehicle to spacecraft produces quasi-static load, sine vibration and random vibration. Random vibration is also induced by acoustic vibrations transferred by surface of spacecraft. And shock vibration is produced when spacecraft is separated from launch vehicle. To verify operation of spacecraft under these launch environments, separation shock test, sine vibration test, acoustic vibration test and random vibration test should be performed. This paper describes these launch environment test requirements.