• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.1
• /
• pp.227-237
• /
• 1998

In case the systems have radioactivity, toxic liquid or expensive fluid, and have to be performed repair work at one point of the system pipe, the formation of an internal ice plug by the removal of heat from the pipe is often consideredas a useful method. In this procedure, an annular jacket is placed around the pipe, and the jacket is then filled with liquid Nitrogen(-196.deg. C). Thermal analysis by the finite element method based on the laboratory experiments has been constructed. The result of the finite element analysis on the experimental model shows to be reasonable, and thus the finite element analysis for different pipe size, material and thickness has been performed to see if the ice plugging procedure in various applications can be safely performed without possibility of damage to the pipe. It has been confirmed that in carbon steel pipes the maximum stress is found around the boundary of the freezing jacket, and the stress increases as pipe thickness increases, but the maximum stress shows no consistency along the increment of the pipe diameter. The maximum stresses appear lower than yield stress in carbon steel. It has been also shown that in stainless steel pipes the maximum stresses are also found around the boundary of the freezing jacket, but almost the same value in spite of different pipe size an thickness, and the maximum stresses show slightly higher than the yield stress of the stainless steel.

• Journal of the Korean Ceramic Society
• /
• v.39 no.10
• /
• pp.948-954
• /
• 2002

Porous reaction bonded SiC with high fracture strength was developed using Si melt infiltration method for use of the support layer in high temperature gas filter that is essential to develop the next generation power system such as integrated gasification combined cycle system. The porosity and pore size of porous RBSC developed in this study were in the range of 32∼36% and 37∼90 ${\mu}m$ respectively and the maximum fracture strength of porous RBSC fabricated was 120 MPa. The fracture strength and thermal shock resistance of porous RBSC fabricated by Si melt infiltration were much improved compared to those of commercially available porous clay bonded SiC due to the formation of the strong SiC/Si interface between SiC particles. The characteristics of pore structure of porous RBSC was varied depending on the amounts of residual Si as Well as the size of SiC particle used in green body.

• Journal of the Korean Ceramic Society
• /
• v.41 no.9
• /
• pp.663-669
• /
• 2004

Mullite and cordierite, which were stable oxides having excellent thermal and chemical characteristics, were widely used as an engineering and electronic materials. However, thermal shock resistance of the mullite was detriorated, and strength of the cordierite was also reduced at high temperatures. The mullite-cordierite composite powders were synthesized for solving these problems in this study. The mullite-cordierite composite powders were manufactured by the solution-polymerization method using mixtures of fused silica, aluminium nitrate, magnesium nitrate, and PVA. Crystallinity, phase formation, density, and surface area of the synthesis powders were characteristics. Fine mullite-cordlerite composite powders were successfully synthesized at 1300$^{\circ}C$ and their surface areas were about 20㎡/g after planetary milling for 1h. With increasing the milling time, surface area increased to 23 ㎡/g for 4h ana 24㎡/g for 8h.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.9
• /
• pp.1288-1302
• /
• 2011

The aim of this study was to analyze the proteome expression of bovine satellite cells from longissimus dorsi (LD), deep pectoral (DP) and semitendinosus (ST) muscle depots during in vitro myogenic differentiation. Proteomic profiling by twodimensional gel electrophoresis and mass spectrometry of differentiating satellite cells revealed a total of 38 proteins that were differentially regulated among the three depots. Among differentially regulated proteins, metabolic proteins like lactate dehydrogenase (LDH), malate dehydrogenase (MDH) were found to be up regulated in ST, while alpha-enolase (NNE) in LD and DP depot satellite cells were down regulated. Also, our analysis found that there was a prominent up regulation of cytoskeletal proteins like actin, actincapping protein and transgelin along with chaperone proteins like heat shock protein beta 1 (HSPB 1) and T-complex protein 1 (TCP-1). Among other up regulated proteins, LIM domain containing protein, annexin 2 and Rho GDP-dissociation inhibitor 1 (Rho GDI) are observed, which were already proven to be involved in the myogeneis. More interestingly, satellite cells from ST depot were found to have a higher myotube formation rate than the cells from the other two depots. Taken together, our results demonstrated that, proteins involved in glucose metabolism, cytoskeletal modeling and protein folding plays a key role in the myogenic differentiation of bovine satellite cells.

• Journal of Chest Surgery
• /
• v.11 no.3
• /
• pp.326-332
• /
• 1978

There appears some conduction defects frequently after total correction of Tetralogy of Fallot. Common defect is right bundle branch block due to surgical intervention. We experienced complete A-V block which occured 3 months later after total correction of Tetralogy of Fallot in a 8 year old boy. The patient was completely free of any A-V block after the operation for 3 months, and sudden onset of A-V block with coupled premature ventricular contractions resulted him in shock state during the attack of severe bronchopneumonia for 4 days prior to the second visit. Emergency implantation of Cordis demand type temporary pacemaker was necessary to control the complete heart block with bradyarrhythmia and frequent ventricular fibrillation. Permanent cardiac pacemaker was implanted two weeks later as indicated with Cordis Stanicor lambda demand pacemaker, and the patient was discharged uneventfully on the 8th post implantation day with the heart rate of 72/min. Another 3 months after the implantation, the patient was transported to this hospital as dead on arrival after an accidental fall from a 2 meter height, and all possible cardiopulmonary resuscitation was performed for 60 minutes at the emergency room in vain. Autopsy was done to find out the cause of sudden death and the etiology of complete heart block. Microscopic focal infarctions with scar formation were noted along the course of conduction system in the interventricular septum, which might be the main cause of complete heart block during the attack of severe bronchopneumonia complicated with acute bacterial endocarditis. The tip of the pacemaker wire was slipped from the granulation scar at the apex of the right ventricular cavity, and this might be the direct cause of pacing failure and death.

• Journal of Environmental Science International
• /
• v.8 no.4
• /
• pp.525-532
• /
• 1999

This study was conducted to evaluate capability of dyeing wastewater treatment for 3 type reactors. These reactors were Packed Bed Reactor(PBR), Fluidized Bed reactor(FBR) and Moving Media Complete Mixing Activated Sludge reactor(MMCMAS). Experiments of PBR and FBR were performed by various packing ratios and organic loading rates, experiments of MMCMAS were performed by various organic loading rates. In order to obtain ${SBOD}_5$ removal efficiencies of more than 90%, the F/Mv ratios of PBR, FBR, MMCMAS were 0.11 kgBOD/kgMLVSS$\cdot$d, 0.12 kgBOD/kgMLVSS$\cdot$d, and 0.37 kgBOD/kgMLSS$\cdot$d, respectively. So MMCMAS system which has more active microorganisms showed better capability of organic removal and also stronger dynamic and shock loadings than those of PBR and FBR. In PBR and FBR, the media packing ratio of 20% showed better performance of organic matters removal effciencies than 10% and 30%, but sludge production rate at media packing ratio of 30% was relatively lower than that of 10% and 20%. When more than 90% organic matters removal efficiency was obtained, the ratios of attached biomass to total biomass at PBR, FBR, MMCMAS were 89~99%, 87~98%, and 54~80%, respectively. The ratio of attached biomass to total biomass was low in MMCMAS. This was formation of thin biofilm due to shear force between rotaing disc and water. The average sludge production rates(kgVSS/kgBODrem.) of PBR, FBR and MMCMAS were 0.20, 0.29 and 0.54, respectively.

• Biomolecules & Therapeutics
• /
• v.23 no.6
• /
• pp.582-589
• /
• 2015

Several theories emphasize that aging is closely related to oxidative stress and disease. The formation of excess ROS can lead to DNA damage and the acceleration of aging. Vigna angularis is one of the important medicinal plants in Korea. We isolated vitexin from V. angularis and elucidated the lifespan-extending effect of vitexin using the Caenorhabditis elegans model system. Vitexin showed potent lifespan extensive activity and it elevated the survival rates of nematodes against the stressful environments including heat and oxidative conditions. In addition, our results showed that vitexin was able to elevate antioxidant enzyme activities of worms and reduce intracellular ROS accumulation in a dose-dependent manner. These studies demonstrated that the increased stress tolerance of vitexin-mediated nematode could be attributed to increased expressions of stress resistance proteins such as superoxide dismutase (SOD-3) and heat shock protein (HSP-16.2). In this work, we also studied whether vitexin-mediated longevity activity was associated with aging-related factors such as progeny, food intake, growth and movement. The data revealed that these factors were not affected by vitexin treatment except movement. Vitexin treatment improved the body movement of aged nematode, suggesting vitexin affects healthspan as well as lifespan of nematode. These results suggest that vitexin might be a probable candidate which could extend the human lifespan.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.6
• /
• pp.1101-1108
• /
• 2008

Geldanamycin and its analogs are important anticancer agents that inhibit the newly targeted heat-shock protein (Hsp) 90, which is a chaperone protein in eukaryotic cells. To resolve which geldanamycin biosynthetic genes are responsible for particular post-polyketide synthase (PKS) processing steps and in which order the reactions occur, we individually inactivated candidate genes in Streptomyces hygroscopicus subsp. duamyceticus JCM4427 and isolated and elucidated the structures of intermediates from each mutant. The results indicated that gel7 governs at least one of the benzoquinone ring oxidation steps. The gel16 was found to be involved in double-bond formation between C-4 and C-5 of 4,5-dihydrogeldanamycin, which confirmed our previous findings that this double bond is reduced during the post-PKS modification of the polyketide assembly. In addition, pro-geldanamycin, which does not possess a double bond at C-4/5, was purified from the gel7 and gel8 double-gene-inactivated mutant.

• Environmental Engineering Research
• /
• v.10 no.4
• /
• pp.181-190
• /
• 2005

Severe loss or hydrogen occurred in most anaerobic hydrogen fermentation reactors. Several selected methods were applied to suppress the consumption of hydrogen and increase the potential of production. As the first trial, pH shock was applied. The pH of reactor was dropped nearly to 3.0 by stopping alkalinity supply and on]y feeding glucose (5 g/L-d). As the pH was increase to $4.8{\pm}0.2,$ the degradation pathway was derived to solventogenesis resulting in disappearance of hydrogen in the headspace. In the aspect of bacterial community, methanogens weren't detected after 22 and 35 day, respectively. Even though, however, there was no methanogenic bacterium detected with fluorescence in-situ hybridization (FISH) method, hydrogen loss still occurred in the reactor showing a continuous increase of acetate when the pH was increased to $5.5{\pm}0.2$. This result was suggesting the possibility of the survival of spore fanning acetogenic bacteria enduring the severely acidic pH. As an alternative and additive method, nitrate was added in a batch experiment. It resulted in the increase of maximum hydrogen fraction from 29 (blank) to 61 % $(500\;mg\;NO_3/L)$. However, unfortunately, the loss of hydrogen occurred right after the depletion of nitrate by denitrification. In order to prevent the loss entangled with acetate formation, $CO_2$ scavenging in the headspace was applied to the hydrogen fermentation with heat-treated sludge since it was the primer of acetogenesis. As the $CO_2$ scavenging was applied, the maximum fraction of hydrogen was enhanced from 68 % to 87 %. And the loss of hydrogen could be protected effectively.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.96-100
• /
• 2009

One of the major drawbacks associated with the high-level expression of the recombinant proteins in Escherichia coli is the formation of insoluble inclusion bodies in the cytoplasm. Production of recombinant protein at reduced temperature has proven effective in improving the solubility of a number of structurally and functionally unrelated proteins, but a major limitation of using low temperatures for recombinant protein production in E. coli is the reduced rate of synthesis of the heterologous protein caused by the significant reduction of cell growth rate. Here we investigated the effect of co-expression of CspA, a cold-shock protein known to be RNA chaperone at low temperature, on the productivity of recombinant protein at various temperatures by using green fluorescence protein (GFP) as a model recombinant protein. We could observe that the co-expression of CspA enhanced the productivity of GFP at $15^{\circ}C$ by accelerating the growth of E. coli at the temperature. On the other hand, the CspA coexpression didn't affect the cell growth rate as well as the specific GFP production rate at other tested temperatures, $20^{\circ}C$, $25^{\circ}C$, and $37^{\circ}C$.