• 대한조선학회논문집
• /
• 제49권1호
• /
• pp.52-59
• /
• 2012

Among many factors to be considered for higher safety level requirements, the hull stability in intact and damaged conditions in seaways is of utmost importance. Since the assessment of a damaged ship is complicated due to the highly non-linear behavior, it is widely acknowledged that computational fluid dynamics (CFD) methods are one of the most feasible approaches. Although many research activities are being reported on the damaged ship stability recently, most of them are not designed for validation of CFD studies. In this study, well-designed model tests were performed to build a CFD validation database, which is essential in developing better CFD methods for the damage stability assessment. The geometry of the damaged compartment and test conditions were determined based on preliminary CFD simulations. Free roll decay tests in calm water with both intact and damaged ships were performed and the roll motion characteristics were compared. The damaged ship showed a larger roll damping coefficient and more rapid decrease of roll amplitude than the intact ship. The primary reason of these efforts can be explained by the movement of the flooded water.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.209-214
• /
• 1999

The turning circle of a ship is the path followed by her center of gravity in making a turn of 360$^{\circ}$degrees or more with helm at constant angle. But generally it means her path traced at full angle of the rudder. For the ordinary ship the bow will be inside and the stern outside this circle.It has been usually understood that the turning circle is not essentinally affected by ship's speed at Froude numbers less than about 0.30. However, it is recently reported that the speed provide considerable effects upon the turning circle in piloting many ships actually at sea. In this paper, the author analyzed what effects the speed could provide on the turning circle theoretically from the viewpoint of ship motions and examined how the alteration of the speed at Froude no. under 0.30 affect the turning circle actually, through experiments of actual ships of a small and large size.The main results were as follows.1. Even though ship's speed at Froude no. under 0.30, the alteration of the speed affects the turning circle considerably.2. When the full ahead speeds at Froude no. under 0.30 of small and large ships were increased about 3 times slow ahead speeds, the mean rates of increase of the advances, tactical diameters and final diameters of thease ships were about 16%, 21% and 19% respectively.3. When the full ahead speeds at Froued no. under 0.30 of small and large ships were increased about 3 times slow ahead speed, the mean rate of increase of the turning circle elements of large ships was greater 10% than that of small ships. 4. When the full ahead speeds at Froued no. under 0.30 of small and large ships were increased about 3times slow ahead speeds, the mean rates of increase of the tactical diameter and final diameter of thease ships were greater than that of the advances of thease ships. 5. When only alteration of speed or sip's head turning is the effective action to avoid navigational fixed hagards, reducing the speed is always more advantageous than increasing the speed in order to shorten fore or transverse distance.

• 수산해양기술연구
• /
• 제35권3호
• /
• pp.210-210
• /
• 1999

The turning circle of a ship is the path followed by her center of gravity in making a turn of 360$^{\circ}$degrees or more with helm at constant angle. But generally it means her path traced at full angle of the rudder. For the ordinary ship the bow will be inside and the stern outside this circle.It has been usually understood that the turning circle is not essentinally affected by ship's speed at Froude numbers less than about 0.30. However, it is recently reported that the speed provide considerable effects upon the turning circle in piloting many ships actually at sea. In this paper, the author analyzed what effects the speed could provide on the turning circle theoretically from the viewpoint of ship motions and examined how the alteration of the speed at Froude no. under 0.30 affect the turning circle actually, through experiments of actual ships of a small and large size.The main results were as follows.1. Even though ship's speed at Froude no. under 0.30, the alteration of the speed affects the turning circle considerably.2. When the full ahead speeds at Froude no. under 0.30 of small and large ships were increased about 3 times slow ahead speeds, the mean rates of increase of the advances, tactical diameters and final diameters of thease ships were about 16%, 21% and 19% respectively.3. When the full ahead speeds at Froued no. under 0.30 of small and large ships were increased about 3 times slow ahead speed, the mean rate of increase of the turning circle elements of large ships was greater 10% than that of small ships. 4. When the full ahead speeds at Froued no. under 0.30 of small and large ships were increased about 3times slow ahead speeds, the mean rates of increase of the tactical diameter and final diameter of thease ships were greater than that of the advances of thease ships. 5. When only alteration of speed or sip's head turning is the effective action to avoid navigational fixed hagards, reducing the speed is always more advantageous than increasing the speed in order to shorten fore or transverse distance.

• 한국항해항만학회지
• /
• 제28권3호
• /
• pp.207-211
• /
• 2004

LMTT(Linear Motor-based Transfer Technology)는 항만 자동화를 위한 컨테이너 터미널용 수평 이송 장치이며, rail과 shuttle car(mover)에 부착된 stator module로 구성된 PMLSM(Permanent Magnetic Linear Synchronous Motor)에 의해 구동된다. 본 논문은 inner beam과 outer beam의 높이비가 LMTT용 shuttle car의 frame 강도 및 강성에 미치는 영향을 살펴보았다. 설계변수는 inner beam의 단면형상 및 높이비로 설정하였으며, 유한요소해석을 통하여 설계변수가 frame의 강도 및 강성에 미치는 영향을 살펴보았다.

• 대한조선학회논문집
• /
• 제33권4호
• /
• pp.60-65
• /
• 1996

1축 1타선에 대한 조종운동 수학모델은 통상적인 경우 이미 확립되어 널리 사용되고 있다. 또한 저속이나 천수역에서의 조종운동계산에도 응용되고, 새로운 국면의 조종운동 해석에도 기존의 조종수학 모델이 근간이 되고 있다. 한편 2축 2타선과 같은 특수선형에 대해서는 Lee 등에 의한 상세한 구속모형시험 결과로 그 특성이 알려지게 되었고, 1축 1타를 기본으로 하는 기존 수학모델에 약간의 수정을 가함으로서 충분이 조종운동을 추정할 수 있음을 보였다. 본 논문에서는 2축 2타선에 대한 Propeller Effective Wake($1-w_p$)와 유효중립타각 (Effective Neutral Rudder Angle) ${\delta}_R$에 대한 추정모델을 제안하고, Hull의 유체력에 관해서도 Inoue의 추정식을 사용하여, 초기설계단계에서 선박의 주요치수, Propeller 및 타 제원만으로서 개략적인 2축 2타선의 조종운동 계산을 가능하도록 하였다. 이 추정법에 의한 조종운동 계산결과를 엄밀한 구속모형 시험 Data에 의한 계산과 비교하여, 본 논문에서 제안된 추정법의 유용성을 검증하였다.

• 대한조선학회논문집
• /
• 제29권2호
• /
• pp.38-47
• /
• 1992

본 연구에서는 항만내 파도응답과 항만안에 계류된 선박의 운동응답을 선형포텐셜이론으로 해석하고 모형시험을 수행하여 항만공진문제의 물리적 특성과 항만내 계류된 선박의 운동특성을 밝혔다. 유체영역을 해양과 항만영역으로 나누어 각 영역에서 경계치문제를 독립적으로 푼 다음, 두 영역의 해를 항만입구에서 정합하여 미지수를 구함으로써 선박에 입사하는 항만내 파도응답을 유도하였다. 선박에 작용하는 파기진력을 계산하고 선체운동에 따르는 동유체력을 해석하였다 얻어진 유체력을 이용하여 운동방정식을 풀어 선박의 운동변위를 구하였다. 사각형 항만안에 계류된 선박의 운동응답에 대한 실험을 수행한 결과 계산치와 실험치는 정성적으로 서로 비슷한 경향을 보이나 정량적으로 차이를 보이고 있음을 확인하였다. 여기서는 우선 선체운동중 대칭운동(전후동요-수직동요-종동요)만을 취급하였다. 비대칭운동(좌우동요-횡동요-선수동요)과 실험결과는 다음 기회에 발표할 예정이다.

• 한국기계연구소 소보
• /
• 통권17호
• /
• pp.157-165
• /
• 1987

The SWATH concept hull form which is capable of high speed navigation with small oscillatory motions in waves, was developed from the catamaran type hull forms. This paper describes how the motion of a SWATH ship in irregular waves can be reduced by regulating the stabilizing fins. The optimal regulator and LQG (Linear Quadratic Gaussian) controller for vertical plane motion have been applied for both platforming mode and contouring mode controls. The calculations of hydrodynamic coefficients and external forces are possible for defining the system equation for the design purpose of motion control. Performances of the controlled system are compared with those of original system.

• Ocean Systems Engineering
• /
• 제4권2호
• /
• pp.117-136
• /
• 2014

The increased interest in the design of energy efficient ships post IMO regulation on enforcing EEDI has encouraged researchers to reevaluate the numerical methods in predicting important hull design parameters. The prediction of added resistance and stability of ships in the rough sea environment dictates selection of ship hulls. A 3D panel method based on Green function is developed for vessel motion prediction. The effects of parametric instability are also investigated using the Volterra series approach to model the hydrostatic variation due to ship motions. The added resistance is calculated using the near field pressure integration method.

• 대한조선학회논문집
• /
• 제45권1호
• /
• pp.63-72
• /
• 2008

This study considers the motion response of multiple adjacent floating bodies in waves. As a method of solution, a three-dimensional Rankine panel method is adopted in time domain. For the validation of the developed numerical method, the motions of two adjacent Series 60 hulls and ship-barge model are estimated. The computational results are compared with other numerical and experimental analyses, showing favorable agreement.

• 대한조선학회지
• /
• 제24권1호
• /
• pp.35-41
• /
• 1987

An approximate method for calculating added resistance due to regular wave reflection has been established. In order to confirm the applicability of this method, an experimental work was carried out using a Series 60 model with oscillations in the 6-degrees of freedom restricted. Particular attention was paid to the case of the shorter wave length range where the effect of wave reflection is dominant compared to the effects of the ship's motions($\lambda/H=10.6-101.0,\;\lambda/L=0.23-1.18,\;F_n=0.10-0.25$). When comparing the measured and the computed resistance due to wave reflection in a head sea, good agreement is shown. This paper is based on research done by the Author as a member of the Ship Performance Group in the Department of Naval Architecture and Shipbuilding of the University of Newcastle-upon-Tyne in England, under the supervision of Dr. R.L. Townsin.