• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.302-307
• /
• 2017

Draft ice in polar regions is formed due to sea level changes and various environmental factors cause damage due to collision with offshore plants and ships for resource development. Drift ice in polar regions is a potential source of accidents for offshore plants that perform long-term operations in one place, as well as on the ship. To prevent accidents with drift ice, offshore plants and ships in polar regions use satellite image information and detection radar to detect drift ice. However, the inability to use visible satellite images at night significantly lowers the detection probability by radar for small drift ice. In this study, we used a thermal imaging system which can be operated day and night for the detection of drift ice, and carried out an experimental study on the detection characteristics of drift ice. To examine the night operation of the thermal imaging system, the experimental condition was set and the thermal image was measured according to the measurement angle change. Under this condition, the correlation was analyzed by theoretical calculating the radiant energy of the drift ice and the sea water.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.6
• /
• pp.407-413
• /
• 2013

In the conventional towing tank, the ordinary towing carriage has a speed barrier which caused not only by the limitation of the length of towing tank but also the limitation of acceleration. Therefore the length of the towing tank should be decided carefully from the planning stage of the towing tank construction. Consequently the acceleration of the towing carriage should be taken less than 0.06g practically to avoid the slip of the wheel on rail. Due to the increasing demand of the high speed experiments on the development of special novel ship, the requirement of the high speed towing carriage is continuously increased recently. When the minimum measuring time of the towing experiment is prescribed as five seconds, the carriage should be accelerated with higher than 0.12 g to get the speed of 18 m/sec even in the towing tank having a length of 400m in length approximately. This means that the requirement of acceleration is bigger than twice of the ordinary practices of carriage acceleration. In such a condition the exerted total power of motor could not converted to traction force for the acceleration of the carriage without slip. To over come these difficulties a pair of horizontal traction wheels are reinforced to each of the ordinary vertical carrier wheel and appropriate suspension system has been devised for the towing tank of super high speed operation. It is believed that the design of novel suspension system adaptable for the high speed acceleration of towing carriage will play a important role as a reference for the remodeling of the towing tank for high speed experiment.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.121-127
• /
• 2020

The small tracking radar targets the target in a real-time, fast-moving, fast-moving target against aircraft with a large RCS that is maneuvering at low speed and a small RCS aircraft maneuvering at high speed (fighters, drones, helicopters, etc.) It is a pulsed radar that detects and tracks. Performing a performance test on a tracking radar in a real environment is expensive, and it is difficult to quantitatively measure performance in a real environment. Describes the composition of the laboratory environment's comprehensive performance test facility and the main requirements and implementation of each configuration.Anechoic chambers to simulate the room environment, simulation target generator to simulate the signal of the room target, target It is composed of a horn antenna driving device to simulate the movement of a vehicle and a Flight Motion Simulatior (FMS) to simulate the flight environment of a tracking radar, and each design and implementation has been described.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.23 no.1
• /
• pp.113-129
• /
• 2012

This study focuses on two analysis: direct cognition of effectiveness of internship practicum, difference of career attitude maturity. The purpose of this experimental case study is to find out the practical problems of Internship education as a field-study of LIS by applying Job-Shadowing Internship methods. The results reveal that 71% of interns responded the positive effects of Job-Shadowing, but the effects to the career attitude maturity was not statistically significant. The implications of the case study are as follows; (1) systematic pre-instruction and orientation from the department are the critical factor of internship, (2) practicum guidelines(PEP), which is provided by the person in charge of tasks in internship institutions is the another important factor, and finally, (3) tools for measuring the effectiveness of internship is required for LIS practicum major course development.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.55-60
• /
• 2005

Plate that have cutout inner bottom and girder and floor etc. in hull construction absence is used much, and this is strength in case must be situated, but establish in region that high stress interacts sometimes fatally in region that there is no big problem usually by purpose of weight reduction, a person and change of freight, piping etc.. Because cutout's existence gnaws in this place, and, elastic buckling strength by load causes large effect in ultimate strength. Therefore, perforated plate elastic buckling strength and ultimate strength is one of important design criteria which must examine when decide structural elements size at early structure design step of ship. Therefore, and, reasonable elastic buckling strength about perforated plate need design ultimate strength. Calculated ultimated strength change several aspect ratioes and cutout's dimension, and thickness in this investigation. Used program applied ANSYS F.E.A code based on finite element method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.345-352
• /
• 2005

Recently the large shipping companies are reducing a port of call to cut down on expenses related to the large size of ship for economy of scale. Due to this, it is necessary to work out a strategy to overcome the severe competition among ports. According to the importance of port marketing, there were many studies on port marketing. But previous studies for domestic port marketing are considered more importantly Products, Price and Promotion than Place of the 4Ps of marketing mix strategy. But it has to preferentially consider the place strategy in Busan Port because the best advantage is geographical position. So this paper shows the strategic plan of Place Marketing.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.709-714
• /
• 2005

The purpose of this research is to verify the strategic fitness and relevance of the hub port strategy by SCM in Northeast Asia and to find a method to be a hub-port with a competitive edge. The fitness of the hub port development strategy is analysed by the structural equation model. The essential results of the research show that minimizing lead time from arrival of ship to inland transport and maximizing logistic services of each stage are important to provide optimal logistic service. And value-added port supply chain strategy is highly co-related with all the parts of port operation system, port transport system, distribution park and port information system. It shows that: various value added logistic service activity is more important than lowing cost; inland multimodal system should be rightly connected; distribution park should be connected to industry park to be a port cluster; and port information system should be developed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.7
• /
• pp.760-766
• /
• 2014

This paper represents a portable robot for use in the welding process of the double hulls in shipbuilding yards. It has 5 degrees of freedom and 3kg of payload. Its body weight is 17.3 [kg] so that human workers can carry it by hand to the work place. Its body is mainly made of magnesium and aluminum alloys. Since the robot is placed about 25m apart from its controller, EtherCAT is adopted for reliable connection between the robot and controller through a single light cable. RTX real-time kernel and KPA EtherCAT master are used to control the robot on a Windows XP environment. The performance of the developed robot is satisfactory to the requirement in welding tasks of U-type cells in shipbuilding yards.

• Spatial Information Research
• /
• v.17 no.1
• /
• pp.103-115
• /
• 2009

Recently, the seabed facility is gradually being increased based on the development of harbor and the coastal area. However, the comparison between the survey data with the chart still shows the significant differences leading to various disasters over sea accident. Therefore, in this study, the investigation on the seabed facility were performed in 5 areas through an accuracy analysis using an up-to-date surveying equipment(MBES, SSS and SBP). Based on the study more systematic management on the seabed facility, more accurate method on the surveying, and some considerations on the related policies are suggested. Through the study, we obtained more accurate measurement on depth and seabed piping forms in Jakdo and Pyong-tack, on sunken ship in a Mok-po, on seabed crater in Je-ju. In addition, it was possible to present the method for the construction of information infra and a connection with the seabed facility. The criteria on the equipment's specification, surveying method and procedures are set by the experiments and the investigation and surveying accuracy on the seabed facilities are also suggested.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1170-1174
• /
• 2014

If cavitation occurs in propeller, it generates vibration and noise accordingly which results in low efficiency of propeller. It's important to increase cavitation inception speed(CIS) since the noise of cavitation increases significantly from the beginning of cavitation. This paper describes the result of actual observation and measurement onboard ship with controllable pitch propeller(CPP), so as to verify the first occurrence phenomenon of cavitation. The research suggests new type of controllable pitch propeller with improved CIS at the bolt as it started with bolt cavitation as result of observation. It's not found bolt cavitation on the CPP proposed in this paper, furthermore its CIS is increased approximately by 4.5 knots than the existing CPP. The result of the research can be used for development of low-noise CPP and improving performance of CIS.