• 한국농공학회지
• /
• 제30권3호
• /
• pp.82-94
• /
• 1988

A growing attention has been paid to the optimum design of structures in recent years. Most studies on the optimum design of reinforced concrete structures has been mainly focussed to the design of structural members such as beams, slabs and columns, and there exist few studies that deal with the optimum design of large-scale concrete shell structures. The purpose of the present investigation is, therefore, to set up an efficient optimum design method for the large-scale reinforced concrete cylindrical shell structures like intake tower of reservoir. The major design variables are the dimensions and steel areas of each member of structures. The construction cost which is compo8ed of the concrete, steel, and form work costs, respectively, is taken as the objective function. The constraint equations for the design of intake-tower are derived on the basis of strength design method. The results obtained are summarized as follows 1. The efficient optimlzation algorithrns which can execute the automatic optimum design of reinforced concrete intake tower based on the strength design method were developed. 2. Since the objective function and design variables were converged to their optimum values within the first or second iteration, the optimization algorithms developed in this study seem to be efficient and stable. 3. When using the strength design method, the construction cost could be saved about 9% compared with working stress design method. Therefore, the reliability of algorithm was proved. 4. The difference in construction cost between the optimum designs with substructures and with entire structure was found to be small and thus the optimum design with substructures may conveniently be used in practical design. 5. The major active constraints of each structural member were found to be the 'bending moment constraint for slab, the minimum longitudinal steel ratio constraint for tower body and the shearing force, bending moment and maximum eccentricity constraints for footing, respectively. 6. The computer program developed in the present study can be effectively used even by an uneiperienced designer for the optimum design of reinforced concrete intake-tower on the basis of strength design method.

• 한국농공학회지
• /
• 제30권2호
• /
• pp.67-81
• /
• 1988

The purpose of the present study is to set up an efficient optimum design method for the large-scale reinforced concrete cylindrical shell structures like intake tower of reservoir and to establish a solid foundation for the automatic optimum structural design combined with finite element analysis. The major design variables are the dimensions and steel areas of each member of the structures. The construction cost which is composed of the concrete, steel, and form work costs, respectively, is taken as the objective function. The constraint equations for the design of intake-tower are derived on the basis of the working stress design method. The corresponding design guides including the standard specification for concrete structures have been also employed in deraving the constraint conditions. The present nonlinear optimization problem is solved by SUMT method. The reinforced concrete intake-tower is decomposed into three major substructures. The optimization is then conducted for both the whole structure and the substructures. The following conclusions can be drawn from the present study. 1. The basis of automatic optimum design of reinforced concrete cylindrical shell structures which is combined with finite element analysis was established. 2. The efficient optimization algorithms which can execute the automatic optimum desigh of reinforced concrete intake-tower based on the working stress design method were developed. 3. Since the objective function and design variables were converged to their optimum values within the first or second iteration, the optImization algorithms developed in this study seem to be efficient and stable. 4. The difference in construction cost between the optimum designs with the substructures and with the entire structure was found to be small and thus the optimum design with the substructures,rnay conveniently be used in practical design. 5. The major active constraints of each structural member were found to be the tensile stress insteel for salb, the minimum lonitudinal steel ratio constraints for tower body and the shearing stress in concrete, tensile stress in steel and maximum eccentricityconstraints for footing, respectively. 6. The computer program develope in the present study can be effectively used even by an unexperienced designer for the optimum design of reinforced concrete intake-tower.

• 천문학회보
• /
• 제35권2호
• /
• pp.34.1-34.1
• /
• 2010

Studies suggest that activities in luminous AGNs, residing mostly in early-type galaxies, are triggered by merging. However, the observational evidence for the connection between mergers and AGN activity is not clear yet because tracer of the past merging activities such as tidal tail, shell are often too faint. To see if we can reveal the merging features with a small telescope, we observed an AGN, MARK 478, at z=0.077 with long exposure time (7550 seconds) in V filter at Maidanak observatory. Our 2-D fitting analysis shows that the host galaxy of MARK 478 has the bulge to the total luminosity ratio of 0.3. And the residual image, after subtracting point spread function (PSF), bulge and disk components, shows that the host galaxy has an arm-like feature that could be a spiral arm or a feature from minor merging. We also show that the structural parameters obtained from our 2-D fitting match well with those derived from HST image. The promising result suggests that studies of low redshift AGN host galaxies are possible with data from a small telescope. In order to allow a statistical analysis, we hope to expand our sample size in future.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.135-135
• /
• 2003

The fast evolution in the fold of optical communication systems demands powerful optical information treatment. These functions can be performed by integrated optical systems. A key component of such systems is erbium doped waveguide amplifier(EDWA). The intra 4f radiative transition of Er at 1.5 $\mu\textrm{m}$ is particularly interesting because this wavelength is standard in optical telecommunications. The fabrication of waveguide amplifier for integrated optics using sol-gel process has received an increasing attention. Potential advantage of lower cost by less capital equipment and easy processing makes this process an attractive alternatives to conventional technologies like flame hydrolysis deposition, ion exchange and chemical vapor deposition, etc. In addition, sol-gel process has been found to be extremely suitable for the control of composition and refractive index related directly with optical properties. The main drawback of such an amplifier with respect to the EDWA is the need for a much higher Er3+ concentration to compensate for the smaller interaction length. However, the high doping of Er might be resulted in the non-radiative relaxation by clustering of Er ions End co-operative upconversion. In order to solve this problem, we investigate the possibility of avoiding short Er-Er distances by encapsulation of Er3+ ions in hosts such as organic-inorganic hybrid materials. For inorganic-organic hybrid sols, methacryloxypropyltrimethoxysilane (MPTS), zirconyl chloride octahydrate and erbium(III) chloride hexahydrate were used as starting materials, followed by conventional sol-gel process. It was observed by TEM that nano sols having core/shell toplology were formed, depending on the mole ratio of Zr/Er. The surface roughness for the coatings on Si substrate was investigated by AFM as a function of Zr/Er ratio. The local environment and vibrational Properties of Er3+ ions were studied using Near-IR, FT-IR, and UV/Vis spectroscopy. Nano hybrid coatings derived from polymer and Er doped encapsulation Eave the good luminescence at 1.55$\mu\textrm{m}$.

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제6권2호
• /
• pp.87-94
• /
• 2017

최근 각종 공문서와 증빙 서류를 비롯하여 대부분의 문서가 디지털 데이터의 형태로 사용되고 있다. 특히 MS 오피스는 전 세계적으로 공공기관, 기업, 학교, 가정 등 다양한 곳에서 가장 많이 사용하고 있는 문서 편집 소프트웨어로써 악의적인 목적을 가진 사용자들이 해당 문서 프로그램의 범용성을 이용하여 MS 오피스 문서 파일을 악성 행위를 위한 매개체로 사용하고 있으며, 최근에는 단순한 사용자뿐만 아니라 국내외 정부 기관과 주요기업을 비롯하여 기반시설에서도 MS 오피스 문서 파일 형태의 악성코드가 유입되고 있다. MS 오피스 문서에 악성 코드를 삽입하는 방법은 단순히 미할당 영역에 은닉하는 방법을 사용할 뿐만 아니라 매크로 기능을 이용하는 등 다양한 방법을 통해 점점 정교한 형태로 진화되고 있다. 이러한 악성 코드들을 탐지하기 위해서 시그니처를 이용하거나 샌드박스를 이용한 탐지방법이 존재하지만, 유동적이고 복잡해지는 악성 코드들을 탐지하기에는 한계가 있다. 따라서 본 논문에서는 디지털 포렌식 관점에서 MS 오피스 문서 분석에 필요한 주요 메타데이터와 파일 포맷 구조 분석을 통해 매크로 영역과 그 외 악성 코드가 삽입될 가능성이 존재하는 영역들을 확인함으로써 MS 오피스 문서 파일 내 비정상 요소를 탐지하는 기법을 제안한다.

• 천문학회보
• /
• 제39권1호
• /
• pp.61.1-61.1
• /
• 2014

GSH 006-15+7 is a Milky Way supershell discovered by Moss et al. (2012). This supershell shows large shell-like structures in H I velocity maps. We have analyzed FUV emission for the supershell regions based on the FIMS and GALEX observations. Bright FUV flux at the boundaries of the supershell is mostly originated from dust scattering of FUV photons by dust clouds which was also observed at the boundaries of the supershell. We could find the distance to the supershell can be closer more than 30% compared with the distance of 1500 pc suggested by Moss et al. (2012) from the dust scattering simulation. And we also found the albedo and the phase function asymmetry factor of interstellar grains were 0.30 and 0.40, respectively. The confidence range for the albedo covers the theoretical value of 0.40, but g-factor is rather smaller than the theoretical value of 0.65. The small g-factor might mean the environment of turbulent ISM of the supershell. Meanwhile, the excess of C IV and X-ray emissions in the inside of the supershell can support the existence of hot gas and cooling in the supershell. And the C IV and X-ray emissions are monotonically decrease as away from the center of the SNR. This indicates the size of the hot bubble has considerably shrunk. We applied a simple simulation model to the PDR candidate region of the lower part of the supershell and obtained a H2 column density N(H2) = 1017.0-18.0 cm-2 and total hydrogen density nH ${\geq}$ 10 cm-3. This result shows the PDR candidate region represents a transition region from the warm phase to the cool phase in the PDR.