• 제목/요약/키워드: sheet pile

검색결과 94건 처리시간 0.027초

점토지반에 이중벽체가 적용된 해상폐기물매립장의 적정 차수 기준 (Proper Regulation of the Cutoff System in Offshore Landfill Built on Clay Ground with Double Walls)

  • 황웅기;김향은;최호성;김태형
    • 한국지반공학회논문집
    • /
    • 제35권8호
    • /
    • pp.5-15
    • /
    • 2019
  • 이 연구는 오염원 유출을 방지하기 위한 해상폐기물매립장 차수시스템에 요구되는 적절한 기준을 제안하기 위해 수행되었다. 차수시스템은 바닥층과 연직벽으로 구성된다. 바닥층은 불투수 점토층으로 연직벽은 이중벽체로 외곽벽체는 강관쉬트파일로 외력에 대한 저항을 담당하고 연직내부벽체가 차수를 담당하는 것으로 가정하였다. SEEP/W와 CTRAN/W 프로그램을 이용하여 침투-이류-분산 해석을 정상류 및 비정상류 조건에서 실시하였다. 해석결과, 정상류 조건에서 비정상류 조건 보다 오염원 이동이 크게 나타나 설계관점에서 차수기준은 정상류조건에서 산정된 값을 적용하는 것이 타당한 것으로 나타났다. 바닥층의 점토지반이 균질하고 연직차수시스템의 시공에 문제가 없다는 전제하에 정상류조건에서 오염원 이동의 차수에 요구되는 점토층 및 연직차수벽의 투수계수, 두께, 근입깊이 등이 제안되었다.

브레이싱을 이용한 자립식 흙막이 공법에 관한 연구 (A Study on the Self-contained Earth Retaining Wall Method Using Bracing)

  • 김종길
    • 디지털융복합연구
    • /
    • 제17권3호
    • /
    • pp.205-213
    • /
    • 2019
  • 건설현장의 굴토작업과 흙막이 가시설은 서로 밀접한 관계를 가지고 있다. 협소한 공간에서 가장 효율적으로 지하구조물을 축조하고 굴토작업시 외측 배면의 토사 이완을 방지하고 지하수위를 유지하기 위한 방안으로 안전성이 확보된 흙막이 가시설 설치는 반드시 필요하다. 본 연구는 기존 지하층 굴토공사에서 흙의 유실을 방지하기 위해 설치하는 가설흙막이를 종래에는 가설벽체를 형성하고 어스앵커, 래커, 스트러트 등을 이용하여 내부 지보를 하고 굴토공사를 시행하던 방식에서, RSB공법은 기존 재래식공법의 문제점을 개선하여, 내부 지보재를 제거하고 2열 엄지말뚝과 브레이싱을 이용하여 자립으로 토압에 저항하도록 하여 지반굴착을 진행하는 공법이다. 본 연구에서는 RSB공법 현장시범적용과 계측결과를 통하여 굴착방법에 따른 흙막이 가시설의 공법 적용성, 평가결과 발생변위가 모두 계측 허용치 만족하고. 기존 재래식공법에 비해 시공성과 경제성이 향상되었다.

GEOTECHNICAL DESIGNS OF THE SHIP IMPACT PROTECTION SYSTEM FOR INCHEON BRIDGE

  • Choi, Sung-Min;Oh, Seung-Tak;Park, Sang-Il;Kim, Sung-Hwan
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2010년도 추계 학술발표회 3차
    • /
    • pp.72-77
    • /
    • 2010
  • The Incheon Bridge, which was opened to the traffic in October 2009, is an 18.4 km long sea-crossing bridge connecting the Incheon International Airport with the expressway networks around the Seoul metropolitan area by way of Songdo District of Incheon City. This bridge is an integration of several special featured bridges and the major part of the bridge consists of cable-stayed spans. This marine cable-stayed bridge has a main span of 800 m wide to cross the vessel navigation channel in and out of the Incheon Port. In waterways where ship collision is anticipated, bridges shall be designed to resist ship impact forces, and/or, adequately protected by ship impact protection (SIP) systems. For the Incheon Bridge, large diameter circular dolphins as SIP were made at 44 locations of the both side of the main span around the piers of the cable-stayed bridge span. This world's largest dolphin-type SIP system protects the bridge against the collision with 100,000 DWT tanker navigating the channel with speed of 10 knots. Diameter of the dolphin is up to 25 m. Vessel collision risk was assessed by probability based analysis with AASHTO Method-II. The annual frequency of bridge collapse through the risk analysis for 71,370 cases of the impact scenario was less than $0.5{\times}10^{-4}$ and satisfies design requirements. The dolphin is the circular sheet pile structure filled with crushed rock and closed at the top with a robust concrete cap. The structural design was performed with numerical analyses of which constitutional model was verified by the physical model experiment using the geo-centrifugal testing equipment. 3D non-linear finite element models were used to analyze the structural response and energy-dissipating capability of dolphins which were deeply embedded in the seabed. The dolphin structure secures external stability and internal stability for ordinary loads such as wave and current pressure. Considering failure mechanism, stability assessment was performed for the strength limit state and service limit state of the dolphins. The friction angle of the crushed stone as a filling material was reduced to $38^{\circ}$ considering the possibility of contracting behavior as the impact.

  • PDF

선박충돌 시 돌핀 구조물의 거동에 대한 원심모형실험 (Centrifugal Test on Behavior of the Dolphin Structure under Ship Collision)

  • 오승탁;배우석;조성민;허열
    • 한국지반환경공학회 논문집
    • /
    • 제12권1호
    • /
    • pp.61-70
    • /
    • 2011
  • 충돌보호공은 해저지반에 깊게 근입되어 있으며 돌핀을 의미하는 상부는 단단한 콘트리트 뚜껑으로 막혀지고 쇄석으로 채워진 원형의 속채움 시트파일의 배열로 구성된다. 본 연구에서는 돌핀의 거동을 규명하기 위해 총 7회의 준정적실험과 11회의 동적 원심모형실험을 수행하였다. 주요한 실험적 결과는 다음과 같다. 우선, 준정적실험의 실험적인 힘-변위 결과는 채움재 강성과 관련된 채움 밀도의 변화로부터 구조물의 초기 강성에 대한 영향을 보여준다. 그리고 동일한 변위에서의 에너지 소산을 비교해보면 더 조밀한 채움에서 직경 20m 돌핀은 16%, 직경 30m 돌핀은 23% 정도 소산율이 증가하는 것으로 나타났다. 30m 직경의 돌핀이 더 큰 민감도를 갖는 것은 채움재의 변형률이 에너지소산에 대해 보다 크게 기여하기 때문이다. 동 정적 충돌실험결과, 일반적으로 동적 응답이 준정적 응답보다 26~58%까지 크고 더 작은 변위에서 에너지 소산이 발생되고 있음을 알 수 있다. 따라서 돌핀 구조물의 거동예측 시 준정적 응답특성을 사용하는 것이 보수적이라는 것을 알 수 있으며, 하부충돌 시 돌핀 저항력은 상부충돌 시와 동일하거나 더 우세한 것으로 나타났다.