• 한국재료학회지
• /
• 제19권9호
• /
• pp.488-493
• /
• 2009

Thin films of single-wall carbon nanotubes (SWNT) with various thicknesses were fabricated, and their optical and electrical properties were investigated. The SWNTs of various thicknesses were directly coated in the arc-discharge chamber during the synthesis and then thermally and chemically purified. The crystalline quality of the SWNTs was improved by the purification processes as determined by Raman spectroscopy measurements. The resistance of the film is the lowest for the chemically purified SWNTs. The resistance vs. thickness measurements reveal the percolation thickness of the SWNT film to be $\sim$50 nm. Optical absorption coefficient due to Beer-Lambert is estimated to be $7.1{\times}10^{-2}nm^{-1}$. The film thickness for 80% transparency is about 32 nm, and the sheet resistance is 242$\Omega$/sq. The authors also confirmed the relation between electrical conductance and optical conductance with very good reliability by measuring the resistance and transparency measurements.

• 한국재료학회지
• /
• 제29권5호
• /
• pp.311-316
• /
• 2019

Transparent conducting electrodes are essential components in various optoelectrical devices. Although indium tin oxide thin films have been widely used for transparent conducting electrodes, silver nanowire network is a promising alternative to indium tin oxide thin films owing to its lower processing cost and greater suitability for flexible device application. In order to widen the application of silver nanowire network, the electrical conductance has to be improved while maintaining high optical transparency. In this study, we report the enhancement of the electrical conductance of silver nanowire network transparent electrodes by copper electrodeposition on the silver nanowire networks. The electrodeposited copper lowered the sheet resistance of the silver nanowire networks from $21.9{\Omega}{\square}$ to $12.6{\Omega}{\square}$. We perform detailed X-ray diffraction analysis revealing the effect of the amount of electrodeposited copper-shell on the sheet resistance of the core-shell(silver/copper) nanowire network transparent electrodes. From the relationship between the cross-sectional area of the copper-shell and the sheet resistance of the transparent electrodes, we deduce the electrical resistivity of electrodeposited copper to be approximately 4.5 times that of copper bulk.

• Ocean and Polar Research
• /
• 제26권3호
• /
• pp.489-499
• /
• 2004

The climatological characteristics of the polar ionospheric currents obtained from the simultaneous observations of the ionospheric electric field and conductivity are examined. For this purpose, 43 and 109 days of measurements from the Chatanika and Sondrestrom incoherent scatter radars are utilized respectively. The ionospheric current density is compared with the corresponding ground magnetic disturbance. Several interesting characteristics about the polar ionosphere are apparent from this study: (1) The sun determines largely the conductance over the Sondrestrom radar, while the nighttime conductance distribution over the Chatanika radar is significantly affected by auroral precipitation. (2) The regions of the maximum N-S electric field over the Chatanika radar are located approximately at the dawn and dusk sectors, while they tend to shift towards dayside over the Sondrestrom radar. The N-S component over Son-drestrom is slightly stronger than Chatanika. However, the E-W component over Chatanika is negligible compared to that of Sondrestrom. (3) The E-W ionospheric current flows dominantly in the night hemisphere over Chatanika, while it flows in the sunlit hemisphere over Sondrestrom. The N-S current over Chatanika flows prominently in the dawn and dusk sectors, while a strong southward current flows in the prenoon sector over Sondrestrom. (4) The assumption of infinite sheet current approximation is far from realistic, underestimating the current density by a factor of 2 or more. It is particularly serious for the higher latitude region. (5) The correlation between ${\Delta}H\;and\;J_E$ is higher than the one between ${\Delta}D\;and\;J_N$, indicating that field-aligned current affects ${\Delta}D$significantly.

• Journal of Astronomy and Space Sciences
• /
• 제19권1호
• /
• pp.75-88
• /
• 2002

전리층의 전기 전도도와 전기장을 구함으로써 극지방 전리층의 기후학적 특성을 살펴보았다 이를 위해, 총 109일간의 Sondrestrom 비간섭 산란 레이더 자료를 이용하였다. 전기 전도도와 전기장을 이용하여 전리층 전류 분포를 추정하였고, 구해진 전리층 전류 밀도와 그로 인해 유발되는 지상 지자기 변화를 비교하였다. 또한 지상 지자기 변화(특히, D 성분)에 대한 연자기력선 전류의 효과도 검토되었다. Sondrestrom 상공 전리층에 대한 몇 가지 흥미로운 기후학적 특성을 본 연구로부터 알 수 있었다: (1) 주간의 전기 전도도 분포는 주로 태양 EUV복사에 의한 것이며, 야간에는 미약하다. (2) 극관 영역 전리층의 전기 전도도 분포는, 주간에는 태양 EUV복사에 의한 분포를 보이는 반면, 야간에는 Hall 및 Pedersen 전기 전도도의 시간 평균이 각각 1.6 및 1.2 siemen으로 아주 낮다. (3) 남북 성분 전기장의 최대치가 낮 영역에 나타나는 경향이 있다. 동서 성분 전기장은 Chatanika에 비해 강하다 (4) 동서 성분 전류는 낮 영역에서 강하게 흐른다. 정오 바로 전에 강한 남향 전류가 흐른다. (5) 오로라제트전류와 동시에 관측된 지상 지자기 변화 $({{\Delta}}H)$ 사이에 높은 상관관계를 나타낸다. 하지만 무한판상을 가정한 전류가 크게 과소평가 된다. 또한 ${{\Delta}}H$의 관계보다 더 높게 나타나며, 이것은 연자기력선 전류가 ${\Delta}7$에 영향을 미친다는 것을 의미한다.

• Journal of Astronomy and Space Sciences
• /
• 제19권2호
• /
• pp.141-150
• /
• 2002

전리층은 우주환경의 변화에 매우 중요한 역할을 하고 있다. 특히 전기전도도 분포에 관한 정보는 자기권-전리층 상호작용을 이해하는데 필수적이다. 이러한 요구에 부응해서 전기전도도를 구하려는 다양한 시도가 있었다. 본 연구에서는 SuperDARN(Super Dual Auroral Radar Network) 레이더망 중 Goose Bay 및 Stokkseyri 레이더에서 관측한 전기장과 Greenland의 서부해안에 설치된 지자기 관측소에서 동시에 얻은 지상 지자기 기록을 이용하여 전기전도도를 추정하였다. 또한 전리층을 흐르는 전류를 무한판상으로 가정하고 Biot-Savart 및 Ohm의 법칙을 적용하여 Hall 및 Pedersen 전기전도도를 추정하였다. 예상한대로 Hall 전기전도도는 오로라 제트전류대의 중심을 따라 상당히 강화됨을 알 수 있었다. 그러나 Pedersen 전기전도도는 광범위한 지역에 서 음의 값이 나타났다. 이러한 문제를 보완하기 위해서 지자기 변화 성분인 ${\Delta}D$에 연자기력선 전류의 효과를 고려하였다. 그 결과 이전에 음으로 나타난 지역이 상당히 감소되었다. 따라서 지상 지자기 변화 자료와 레이더에서 관측된 전기장을 이용해서 전기전도도를 구하는 경우 연자기력선 전류의 효과를 고려해야 한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권3호
• /
• pp.189-198
• /
• 2006

A new analytical model has been proposed for predicting the sheet carrier density of Metal insulator Semiconductor High Electron Mobility Transistor (MISHEMT). The model takes into account the non-linear relationship between sheet carrier density and quasi Fermi energy level to consider the quantum effects and to validate it from subthreshold region to high conduction region. Then model has been formulated in such a way that it is applicable to MESFET/HEMT/MISFET with few adjustable parameters. The model can also be used to evaluate the characteristics for different gate insulator geometries like T-gate etc. The model has been extended to forecast the drain current, conductance and high frequency performance. The results so obtained from the analysis show excellent agreement with previous models and simulated results that proves the validity of our model.

• 한국정밀공학회지
• /
• 제17권8호
• /
• pp.180-188
• /
• 2000

Fine multi-hole sheet metal product(FMSMP) is a specific metal plate which is used in color TV and computer monitor. Processes of manufacturing FMSMP are generally composed of coating cleaning exposure and etching processes. After a thin metal plate is made by rolling photosensitive liquid is coated on the metal plate in coating process. Then the coated thin metal plate consecutively passes through exposure process in which upper and lower glasses are compressed by vacuuming the space between glasses and metal plate. In this lowered glasses are compressed by vacuuming the space between glasses and metal plate. In this lowered vacuum state certain part of metal plate is desirably exposed to light and will be etched into forming lots of well-arranged holes with a specific diameter, nowadays to manufacture FMSMP of 17 inch braun tube 80 second is required for complete vacuum but 35 second is applied to manufacture FMSMP in reality. In the present study vacuuming time is tried to reduce for improvement of productivity by analyzing vacuum system and proposing several solutions, for faster vacuuming speed degree of vacuum state between glasses and metal plate is improved by the proposed method and experiments using the proposed method are performed for verification. In addition microstructure of FMSMP is investigated to prevent stain phenomena and to improve quality of the product.

• Progress in Superconductivity
• /
• 제13권1호
• /
• pp.47-51
• /
• 2011

Mono-atomic-layer graphene is an interesting system for studying the relativistic carrier transport arising from a linear energy-momentum dispersion relation. An easy control of the carrier density in graphene by applying an external gate field makes the system even more useful. In this study, we measured the Josephson current in a device consisting of mono-layer graphene sheet sandwiched between two closely spaced (~300 nm) aluminum superconducting electrodes. Gate dependence of the supercurrent in graphene Josephson junction follows the gate dependence of the normal-state conductance. The gate-tunable and relatively large supercurrent in a graphene Josephson junction would facilitate our understanding on the weak-link behavior in a superconducting-normal metal-superconducting (SNS) type Josephson junction.

• Journal of Information Display
• /
• 제11권2호
• /
• pp.52-56
• /
• 2010

High-efficiency organic light-emitting diodes (OLEDs) based on multilayer transparent electrodes (MTEs) are reported. The dielectric/metal/dielectric (DMD) multilayer electrode based on a thin silver layer achieved high sheet conductance as small as $6{\Omega}/sp$ and a tuning capability in the optical and electrical properties by engineering the inner and outer dielectric layers. In the conventional normal bottom-emitting structure, a DMD-based OLED can be fabricated with 90% higher forward luminous efficiency and 30% higher external quantum efficiency (EQE) compared to ITO-based devices. Special attention was paid to the optimization method of such MTE structure considering both the injection and optical structures.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.87-91
• /
• 2019

As a highly conductive and transparent electrode, ITO/Ag/ITO multilayers are fabricated using an in-line sputtering method. Optimal thickness conditions have been investigated in terms of the optical transmittance and the electrical conductance. Considering the optical properties, in this study, the experimental characteristics are analyzed based on theoretical phenomena, and they are compared with the simulated results. The simulations are based on the finite-difference-time-domain (FDTD) method in solving linear Maxwell equations. Consequently, the results showed that ITO/Ag/ITO multilayer structures with respective thicknesses of 39.2 nm/10.7 nm/39.2 nm are most suitable with an average transmittance of about 87% calculated for wavelengths ranging from 400-800 nm and a sheet resistance of about $7.1{\Omega}/{\square}$.