• Journal of the Korean Wood Science and Technology
• /
• 제24권4호
• /
• pp.32-39
• /
• 1996

The overall purpose of this study was to investigate the dimensional changes of melamine sheet laminated medium density fiberboard(MDF) floorings by sub-heating system(Ondol). This study was also conducted to improve the properties of melamine sheet laminated MDF floorings. The effects of density, resin content, manufacturing speed of MDF and types of melamine sheet on dimensional and weight changes of floorings were investigated. The results were as followings. 1. Dimensional and weight change of melamine sheet laminated MDF flooring by heating decreased with decreasing the density of MDF. 2. Dimensional and weight change of melamine sheet laminated MDF flooring by heating decreased with increasing the resin content of MDF. 3. Dimensional and weight change of melamine sheet laminated MDF flooring by heating decreased with decreasing the manufacturing speed of MDF. 4. Dimensional change of melamine sheet laminated MDF flooring in width direction by heating was doubled than that in machine direction. 5. Dimensional change and curling of high pressure melamine laminate(HPM) laminated MDF flooring by heating was less than those of low pressure melamine laminate(LPL) flooring. 6. Weight loss of melamine sheet laminated MDF flooring by heating has linear relationship with shrinkage.

• Composites Research
• /
• 제13권2호
• /
• pp.81-90
• /
• 2000

자동차의 경량화를 위해서 AA5182/Polypropylene/AA5182 형태의 알루미늄 합금과 폴리프로필렌으로 구성된 샌드위치 판재가 개발되었다. 샌드위치 판재의 성형성을 평가하기 위해서 0.2mm 두께의 AA5182 판재와 1.2mm 두께의 샌드위치 판재의 성형한계도를 수정된 Marciniak-Kuczynski(M-K) 이론에 의해서 구하였다. 판재의 이방성을 표현하기 위해서 Hill의 1948년 항복곡선 표현 식을 사용하였다. 그 결과 샌드위치 판재의 성형한계도가 AA5182판재보다 더 우수하게 평가되었으며 이것은 실험값과 잘 일치하였다.

• 한국CDE학회논문집
• /
• 제5권3호
• /
• pp.242-254
• /
• 2000

This paper describes an efficient solid modeling method for thin-walled plastic or sheet metal parts, based on the non-manifold offsetting operations. Since the previous methods for modeling and converting a sheet into a solid have adopted the boundary representations for solid object as their topological framework, it is difficult to represent the exact adjacency relationship between topological entities of a sheet model and a mixture of wireframe and sheet models that can appear in the meantime of modeling procedure, and it is hard to implement topological operations for sheet modeling and transformation of a sheet into a solid. To solve these problems, we introduce a non-manifold B-rep and propose a sheet conversion method based on a non-manifold offset algorithm. Because the non-manifold offset aigorithm based on mathematical definitions results in an offset solid with tubular and spherical thickness-faces we modify it to generate the ruled or planar thickness-faces that are mostly shown in actual plastic or sheet metal parts. In addition, in order to accelerate the Boolean operations used the offset algorithm, we also develope an efficient face-face intersection algorithm using topological adjacency information.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1155-1156
• /
• 2006

In this paper, we analyzed the effect of EVA Sheet Gel Content depending on curing condition for photovoltaic module. Gel Content was measured by manufacturing Glass/EVA Sheet/Back Sheet scheme at several curing temperature and curing time. And the surface analysis of EVA Sheet depending on process condition could be observed using SEM(Scanning Electron Microscope). Through this experiment, we could confirm that there are differences on Gel Content of EVA Sheet and surface configuration depending on curing temperature and curing time. To find out the optical characteristic dependency on curing condition, Class/EVA Sheet/Glass scheme was fabricated. The optical transmittance of EVA Sheet at visible wavelength was enhanced 5% when compared to Glass/Glass scheme. And the transmittance of $130^{\circ}C$/4min, $110^{\circ}C$/4min, $160^{\circ}C$/6min process condition was higher at ultraviolet wavelength range. These curing conditions could be regarded as the best process for suppression the discoloration speed of EVA Sheet under UV light.

• 한국정보통신학회논문지
• /
• 제14권8호
• /
• pp.1943-1949
• /
• 2010

본 논문에서는 하나의 층에 두 가지의 주파수 대역을 내장해서 인레이를 구성하는 One-Sheet Inlay 패턴을 이용한 RFID 태그 안테나를 개발하였다. One-Sheet Inlay RFID 태그 안테나는 이종의 RFID 안테나를 하나의 카드에 내장해서 사용하는 방법이 아니라 하나의 시트에 13.56MHz와 900MHz RFID 태그 안테나를 구현하였다. 제안한 방법을 유용성을 입증하기 위하여 실험 장치를 구성하였고, 6개의 패턴을 설계하여 각각의 패턴에 대해서 인식거리를 평가하였다. 설계한 One-Sheet Inlay RFID 태그 안테나 중에서 패턴 5가 13.56MHz RFID 태그에 대해서는 인식거리 3.5cm이고, 900MHz RFID 태그에 대해서는 인식거리 5.34m로 우수한 성능을 나타내었다.

• 한국산학기술학회논문지
• /
• 제8권1호
• /
• pp.103-109
• /
• 2007

본 논문에서는 시스템 파라미터의 변동이나 모델의 불확실성 및 외부 외란 등에 강인한 외란 관측기에 기초로 한 강인 제어기의 설계를 제안한다. 제어기는 두 개 루프의 구조를 갖는 모델기반 보상기와 궤환 제어기 구조로 구성되어 있다. 내부 루프 보상기는 내외부의 외란을 제거하고, 외부 루프 궤환 제어기는 주어진 사양을 만족하도록 하는 역할을 수행한다. 결과적으로, 제안한 강인 제어기를 이용함으로써 외란에 대해 시스템을 안정화시킬 수 있으며, 제어 성능을 향상시킬 수 있음을 보인다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.169-170
• /
• 2023

In this study, light-heat generating materials were produced in two ways, and the performance of two light-generating insulation sheets was reviewed. As a result of the experiment, it was possible to confirm the improved heating performance of the light heating insulation sheet compared to the existing bubble sheet. The light heat insulation sheet (b) showed improved thermal properties compared to the existing bubble sheet, and it is believed that the temperature has increased due to the combined effect of initial hydration heat and heat generation after installation. In future studies additional experiments are needed to compensate for the insufficient insulation performance due to the single bubble sheet through the double bubble sheet and to adjust the amount of light-generating materials added as a consideration of the optimal heat-generating effect of the light-generating insulation sheet (b).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1483-1486
• /
• 2004

Purpose of this paper is to accummulate database of automotive steel sheet from mild steel to high strength steel in cold rolled steel sheets. Physical properties, mainly mechanical properties, of steel sheet are tested and all data are arranged to one sheet. Methods of test are composed of FLD, tensile strength test, chemical composition, surface roughness and product conditions. Finally this database will be helpful to automotive body designers and die designers to design automotive body parts and tools in a material point of view.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.30-40
• /
• 1999

The possibility of the characterization of sheet formation by image analysis with transmitted light was evaluated. Specific perimenter, average perimeter and variation could not be used to predict the sheet formation because there were no corrleation. Although image analysis method still have a lot of problems , it was found that the contrast intensity obtained by image analysis with transmitted light can be used to predict the sheet formation. In the case of highly filled sheet, the intensity of transmitted light was too low to characterize the sheet formation . However, it was possible to characterize the formation of unfilled heavy weight paper($\leq$200g/㎡).

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1125-1130
• /
• 2005

This paper presents a method for inter-sheet spacing control in a flexible media handling device. In order to verify the performance of inter-sheet spacing control by experiment, system of section structure is introduced in the first place. In the introduced system, each section is driven by different servo motor for independent section freedom. And suitable inter-sheet spacing control algorithm that is more optimal than conventional inter-sheet spacing control algorithm is proposed. Finally experiments are performed to confirm the performance of inter-sheet spacing control. And two inter-sheet spacing control algorithms, conventional and proposed, are compared with each other.