• 한국염색가공학회지
• /
• 제11권2호
• /
• pp.9-18
• /
• 1999

In order to establish fundamental data for the betterment of Polyester microfiber fabric handle, a study by using fixed warp of ITY yarn samples with P/F, DTY, and ITY weft yarns was performed. For this purpose the samples of total 27 kinds were prepared. That is, each sample yarn was twisted in three ways and for each twisted yarn the fabric structures were modified in three ways, plain, twill, and satin. The examination was done by focusing on the point of the change of handles and the characteristics of the mechanical properties of the samples with the change of yarn and the fabric structure. The handles and the mechanical properties were examined with the KES-F system suggested by Kawabata. The results were as follows : 1. WT and MIU increased with increasing the twist. By comparing WT and MIU by yarn, DTY was higher than P/F. It appeared that twill and satin were higher than plain. 2. The bending rigidity change in DTY with increasing the twist was not significant, however in P/F it appeared apparently decreased with increasing the tlvist. Also, it appeared that when using P/F as weft the bending rigidity was higher than when using DTY and the twill structure appeared higher than the satin structure. 3. In shear force the increasing rates of plain and the twill were higher than satin. When DTY and P/F were used as weft, the shear force was higher in ITY and DTY than in P/F case. 4. Koshi appeared higher in the order of plain, twill and satin. When DTY and P/F were used as the weft Koshi increased with increasing the twist in plain, however in twill and satin it appeared to decrease. In hand value ITY(=7.5) appea.ed to be highe. than DTY and P/F(=6.5). 5. In all cases Shinayakasa decreased with increasing the twist. The hand values observed that satin was =4, twill was =3, and plain was =1.5. 6. Fukurami showed no significant change with increasing the twist in DTY, however in P/F and ITY it decreased.

• 한국의류학회지
• /
• 제27권8호
• /
• pp.883-891
• /
• 2003

In this study, a change of hand of fabrics dyed with persimmon juice was measured using Kawabata Evaluation System. Using various cotton fabrics, linen fabric and silk fabric used frequently for persimmon juice dyeing, we examined the changes of physical properties and hand according to persimmon juice dyeing and washing. The dynamic characteristics of hand were measured tensile, shear, bending, compression, surface properties, thickness and weight. Linearity of load-extention and tensile resilience were increased in all kinds of fabrics after dyeing. Tensile energy decreased in cotton fabric 2(gauze), cotton fabric 3(muslin) and linen fabric. Shear stiffness and hysteresis of shear increased in most of fabrics. Bending rigidity of the bending property and hysteresis of bending, linearity of compression of the compression property, compression energy and compression resilience increased in all kinds of fabrics after dyeing. Thickness and weight increased much in all kinds of fabrics after dyeing. In the primary hand value, stiffness and anti-drape stiffness increased in all kind of fabrics after dyeing. The fullness and softness, crispness, scrooping feeling and flexibility with soft feeling decreased. As the stiffness after persimmons dyeing increased, it was suitable for clothes material of summer.

• 한국의류학회지
• /
• 제26권1호
• /
• pp.160-167
• /
• 2002

Stretch fabrics are wide-spread for high performance clothing use with requirements of fitness and adaptability to human's movement. A newly developed 100% PET high stretch fabric has excellent properties with respect to stretch, softness, bulkiness, and apparent volume compared to PET filament fabrics. The 100% PET high stretch fabric shows advantages of a dimensional stability, dye and agent adaptability in dying and finishing process, a property of stretch recovery after washing and lower production cost than that of spandex fabric. KES-FB was used to measure mechanical properties to various directions of the fabric. This study centered on whether the 100% PET high stretch fabric is suitable to quality and shape retention of fabric by testing several properties including tensile, compression, shear, bending and surface characteristic to various measuring directions. Tensile linearity showed maximum value at $0^{\circ}$ in plain and $90^{\circ}$ in twill. Shear Stiffness of plain and twill showed maximum value equally at $45^{\circ}\;and\;135^{\circ}$. Bending rigidity showed maximum value at $0^{\circ}$ in plain and $45^{\circ}$ twill. Mean deviation of MIU showed maximum value at $0^{\circ}\;and\;90^{\circ}$ in plain and $135^{\circ}$ in twill.

• Earthquakes and Structures
• /
• 제9권1호
• /
• pp.145-171
• /
• 2015

Due to earthquakes, many structures suffered extensive damages that were attributed to the torsional effect caused by mass, stiffness or strength eccentricity. Due to this type of asymmetry torsional moments are generated that are imposed by means of additional shear forces developed at the vertical resisting structural elements of the buildings. Although the torsional effect on the response of reinforced concrete buildings was the subject of extensive research over the last decades, a quantitative index measuring the amplification of the shear forces developed at the vertical resisting elements due to lateral-torsional coupling valid for both elastic and elastoplastic response states is still missing. In this study a reliable index capable of assessing the torsional effect is proposed. The performance of the proposed index is evaluated and its correlation with structural response quantities like displacements, interstorey drift, base torque, shear forces and upper diaphragm's rotation is presented. Torsionally stiff, mass eccentric single-story and multistory structures, subjected to bidirectional excitation, are considered and nonlinear dynamic analyses are performed using natural records selected for three hazard levels. It was found that the proposed index provides reliable prediction of the magnitude of torsional effect for all test examples considered.

• 한국강구조학회 논문집
• /
• 제16권5호통권72호
• /
• pp.671-682
• /
• 2004

본 연구는 부분 전단연결을 가지는 강-콘크리트 합성보의 처짐에 미치는 전단슬립의 영향을 조사하는 것이다. 현재 각국의 설계규준에서는 합성보의 처짐 계산시 전단연결재의 강도와 관련되어 있지만, 본 연구에서는 하중조건에 상관없는 전단연결재의 강성에 기반을 둔 정확한 해를 유도하였다. 우선, 평형조건, 곡률의 적합조건에 기반을 둔 3가지 하중조건에서의 합성보의 등가강성을 유도하고, 이로부터 하중조건에 상관없이 슬립의 영향을 적용할 수 있는 간편한 제안식을 유도하였다. 이러한 제안식의 타당성을 검증하기 위해서 현재 AISC에서 사용하고 있는 합성보의 유효강성 및 Nie가 제안한 식과 비교하였다. 일반적으로 사용되는 보의 경우, 전단슬립의 영향은 스팬이 짧을 경우, AISC에 비해서 최대 18%까지의 강성의 감소를 나타냄을 알 수 있었다. 완전합성보의 경우, AISC의 제안 값이 본 연구의 결과 보다 크게 나타났는데, 이는 안전측이 되지 못함을 알 수 있었으며, 불완전 합성보의 경우, AISC 제안식이 본 연구보다 강성을 과소 평가하는 결과를 나타내었다.

• Structural Engineering and Mechanics
• /
• 제66권5호
• /
• pp.637-648
• /
• 2018

When the centers of mass and stiffness of a building do not coincide, the structure experiences torsional responses. Such systems can consist of the underlying soil and the super-structure. The underlying soil may modify the earthquake input motion and change structural responses. Specific effects of the input motion shall also not be ignored. In this study, seismic demands of asymmetric buildings considering soil-structure interaction (SSI) under near-fault ground motions are evaluated. The building is modeled as an idealized single-story structure. The soil beneath the building is modeled by non-linear finite elements in the two states of loose and dense sands both compared with the fixed-base state. The infinite boundary conditions are modelled using viscous boundary elements. The effects of traditional and yield displacement-based (YDB) approaches of strength and stiffness distributions are considered on seismic demands. In the YDB approach, the stiffness considered in seismic design depends on the strength. The results show that the decrease in the base shear considering soft soil induced SSI when the YDB approach is assumed results only in the center of rigidity to control torsional responses. However, for fixed-base structures and those on dense soils both centers of strength and rigidity are controlling.

• 한국식품조리과학회지
• /
• 제10권2호
• /
• pp.146-150
• /
• 1994

생선 어묵에 대두분리단백질, 난백, 유청단백질, 글르우텐과 같은 단백질들을 첨가하였을 때 그들이 어묵의 조직감을 수사하는 기능이 평가되었다. 단백질들은 어묵의 강도, 경도와 층밀림성을 감소시켰다. 단백질이 첨가된 어묵제품은 관능검사에서 제품의 질김성, 씹힘성 및 경도에 대한 강도는 감소시켜주는 반면 이들에 대한 종합적 기호도는 증가시키는 것으로 나타났다. 첨가제로 사용하였던 단백질 자체로 만든 겔의 강도는 이들 단백질을 첨가하여 만든 어묵의 겔 강도와 역비례 관계를 나타냈으며, 첨가한 단백질들이 어묵의 조직감을 수사하는 기능적 특성은 각 단백질들의 수화능력과 겔화 특성 등에 기인하는 것으로 나타났다.

• 한국염색가공학회지
• /
• 제17권5호
• /
• pp.26-36
• /
• 2005

This study was carried to evaluate mechanical characteristics of Poly(ethylene terephthalate) fabrics (by Kawabata evaluation system(KES)) which was systematically treated with $O_2$ low temperature plasma and chitosan acetate solution. Furthermore, surface structure was investigated by SEM, AFM, air permeability and wettability. Tensile energy(WT), shear rigidity(G) and surface roughness(MIU) properties calculated by KES-FB have increased with increasing plasma treatment time, while bending rigidity(G) and energy of compression(WC) value were decreased compared with those of the untreated. SEM photographs showed the identification of chitosan coating but did not confirm the plasma etching structure. Air permeability was decreased according to plasma treatment time with increasing concentrations of chitosan. The water absorption rate made rapid progress by chitosan treatment.

• 수산해양기술연구
• /
• 제38권2호
• /
• pp.101-109
• /
• 2002

본 논문에서 알루미늄 하니콤 샌드위치판 구조(AHSP)의 특성에 대해 해석한 결과는 다음과 같다. 1) AHSP의 H/T비가 낮아질수록 응력이 감소하며, 셀 크기(H)보다는 코어의 두께(T)가 두꺼워질수록 강도와 강성이 증가함을 알 수 있다. 2) AHSP 구조가 동일한 질량에서부터 증가하면서 EASP 구조에 비해 2.5～6.0배 정도의 높은 강도를 보이는 것을 알 수 있다. 3) AHSP의 면재의 두께변화는 AHSP 전체의 강성에 별로 영향을 미치지 못했으나, 심재의 두께가 증가할수록 단면 2차 모멘트의 값이 커지기 때문에 AHSP의 강성이 매우 커짐을 알 수 있다. 4) EASP보다 강성이 큰 AHSP의 고유진동수가 크며, 진동 모드 사이의 차도 커짐을 알 수 있다. 5) 비교연구 결과 AHSP 구조가 EASP 구조보다 적은 질량으로 훨씬 더 높은 강성을 갖는, AHSP 구조의 우수성이 입증된다. 따라서 중량경감이 가장 중요한 문제 중의 하나인 초고속선 및 대형선의 경우 AHSP 구조가 높은 굽힘강성을 갖고 다른 재료에 비해 상대적으로 적은 중량이 필요하므로 구조 재료로서의 적합성을 알 수 있다.

• 패션비즈니스
• /
• 제12권6호
• /
• pp.46-60
• /
• 2008

Lyocell is a regenerated cellulosic fiber manufactured by an environmentally friendly process. The major advantages of lyocell are the excellent drape forming property, the genuine bulkiness, smooth surface, and high dry/wet tenacities. However, one drawback of lyocell is its fibrillation property, which would degrade its aesthetic quality and lower the consumer satisfaction. In our previous studies, lyocell was treated with epichlorohydrin, a non-formalin based crosslinker, to reduce its fibrillation tendency. To investigate the changes of physical properties upon ECH-treatment, the hand characteristics of ECH-treated fabric were observed using KES-FB system and the 3D-virtual sewing image of the fabrics were obtained using 3D CAD simulation system in this study. Since epichlorohydrin(ECH) treatment was conducted in the alkaline medium, the weight reduction was observed in all treated lyocell. The treated lyocell became light, smooth and flexible in spite of ECH crosslinker application. LT and RT in tensile property upon the ECH treatment did not change significantly, however, EMT and WT in the tensile property increased. The significant decrease in bending rigidity was resulted in all ECH-treated lyocell, which is the result of the weight loss upon the alkali condition of ECH treatment. The bending rigidity increased again in the ECH 30% treated lyocell, however, the B value is still lower than the original. Therefore, the ECH-treated lyocell would be more stretchable and softer than the original. Shear rigidity was also decreased in all ECH-treated lyocell, which would result in more drape and body fitting when it is made as a garment. The ECH-treated fabric showed the softer smoother surface according to SMD value from KES evaluation. The virtual 3D sewing image of the ECH-treated lyocell did not show a significant change from that of the original except ECH 30% treated lyocell. ECH 30% treated lyocell showed a stiffer and more puckered image than the original.