• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1358-1366
• /
• 2006

In order to study the effects of shell contents on the liquefaction resistance of the shelly sand, NGI cyclic simple shear tests were performed for the shelly sands with shell contents of 0%, 5%, 10%, 20% and 30% under the effective vertical stress of 50kPa, 100kPa and 150kPa for 40% and 55% of relative density, respectively. Cyclic simple shear test results showed that for the low effective vertical stress, liquefaction resistance increased rapidly with the increase of shell contents in both 40% and 55% relative density. On the other hand, for the high effective vertical stress, the liquefaction resistance increased slightly in 40% relative density whereas the resistance was almost same in 55% relative density. Liquefaction resistance decreased with increasing effective vertical stress for both 40% and 55% relative density. In the same effective vertical stress and shell contents, liquefaction resistance increased with the increase of relative density of sands.

• Computers and Concrete
• /
• 제29권2호
• /
• pp.81-92
• /
• 2022

The influence of normal stress perpendicular to the potential shear plane was always neglected in existing researches, which may lead to a serious deviation of the shear strength of concrete members in practice designs and numerical analyses. In this study, a series of experimental studies are carried out in this paper, which serves to investigate the shear behavior of concrete under compression shear loading. Based on the test results, a three-phase shear failure model for cohesive elements are developed, which is able to take into consideration the influence of normal stress on the shear strength of concrete. To identify the accuracy and applicability of the proposed model, numerical models of a double-noted concrete plate are developed and compared with experimental results. Results show that the proposed constitutive model is able to take into consideration the influence of normal stress on the shear strength of concrete materials, and is effective and accurate for describing the complex fracture of concrete, especially the failure modes under compression shear loadings.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.293-302
• /
• 2010

2 types of geogrids and geotextiles was used to evaluate shear behaviors after installation damage test. Shear behaviors were compared after installation damage test and coefficient of resistance to direct sliding($f_{ds}$) was estimated by theoretical shear analysis. Shear strength of damaged geogrid decreased under high normal stress of 150kPa and shear strength of geotextile decreased with increasing normal stress. It is seen that $f_{ds}$ values after installation damage decreased than before installation damage through comparison calculated $f_{ds}$ by direct theoretical shear analysis. $f_{ds}$ values to be calculated by theoretical shear analysis were changed with before and after installation damage.

• 동력기계공학회지
• /
• 제12권2호
• /
• pp.41-47
• /
• 2008

This article deals with the stress analysis of the friction drive, which transmits the power via the rolling resistance on the contract area between the two rotating bodies. On the contact area, friction drives are normally involved with shear stress due to the transmitted force, as well as normal stress. Thus the stress analysis including the shear stress is necessary for the design of the friction drive. Hertzian results can be used to estimate the normal stress distribution and elastic deflection of the contact area, although the shear stress distribution is not well defined. In order to investigate the shear stress distribution and its effects in a friction drive, we have performed the stress analysis of the spherical continuously variable transmission(CVT) using finite element method. The spherical CVT is one of friction drives, which is used in small power applications. The numerical results show that the normal stress distribution is not affected by the transmitted shear force, and the maximal shear stress is increased in small amount along with the shear force.

• 한국지반신소재학회논문집
• /
• 제21권3호
• /
• pp.61-69
• /
• 2022

본 연구에서는 지반조건을 고려한 말둑의 인발저항 성능의 합리적인 평가방법 확립의 일환으로써, 지반의 세립분 함유율 및 구속압 조건에 따른 말뚝과 지반 경계면의 전단특성을 평가하기 위한 대형직접전단시험을 수행하였다. 그 결과, 수직하중이 증가하고 모형지반의 세립분 함유율이 작을수록 전단변형에 따른 전단응력이 크게 발생됨을 알 수 있었다. 그리고 동일한 수직하중과 세립분 함유율 조건에서 말뚝 모형체의 표면이 거칠수록 최대전단응력은 다소 크게 나타났다. 강도정수로써 내부 마찰각과 점착력을 산정하여 분석한 결과, 모형지반의 세립분 함유율이 증가할수록 모형체 경계면에서의 내부마찰각은 감소하였으나 점착력은 증가하는 것을 알 수 있었다. 또한, 말뚝 모형체 표면이 거칠수록 모형지반의 세립분 함유율에 관계 없이 내부마찰각과 점착력은 크게 나타났다.

• Structural Engineering and Mechanics
• /
• 제78권2호
• /
• pp.199-207
• /
• 2021

In the present paper, an analytical model is proposed to determine the flexural and shear strength of normal and high-strength reinforced concrete beams with longitudinal bars, in the presence of transverse stirrups. The model is based on evaluation of the resistance contribution due to beam and arch actions including interaction with stirrups. For the resistance contribution of the main bars in tension the residual bond adherence of steel bars, including the effect of stirrups and the crack spacing of R.C. beams, is considered. The compressive strength of the compressed arch is also verified by taking into account the biaxial state of stresses. The model was verified on the basis of experimental data available in the literature and it is able to include the following variables in the resistance provision: - geometrical percentage of steel bars; - depth-to-shear span ratio; - resistance of materials; - crack spacing; - tensile stress in main bars; - residual bond resistance including the presence of stirrups;- size effects. Finally, some of the more recent analytical expressions able to predict shear and flexural resistance of concrete beams are mentioned and a comparison is made with experimental data.

• 한국지반환경공학회 논문집
• /
• 제8권6호
• /
• pp.69-76
• /
• 2007

해안 연약지반 개량공사에 사용되는 모래는 대부분 다소간의 패각을 함유하게 된다. 본 연구에서는 패각 함유량이 패각질모래의 액상화 저항에 미치는 영향을 연구하기 위하여 중량비에 의해 0%, 5%, 10%, 20%, 30%의 패각을 함유한 모래의 입도를 조성하고 건조퇴적 방법으로 상대밀도가 40%와 55%인 공시체를 성형하여 50kPa, 100kPa, 150kPa의 압밀유효연직응력으로 NGI형 직접단순전단시험기를 이용해서 반복단순전단시험을 수행하였다. 연구 결과, 압밀유효연직응력이 낮을 경우에는 상대밀도가 40%, 55% 모두 패각 함유량이 많아질수록 액상화강도가 크게 증가하는 경향을 보였다. 그러나 압밀유효연직응력이 높을 경우에는 상대 밀도가 40%일 경우 약간 증가하는 경향을 얻었으나 상대밀도가 55%일 경우에는 거의 일정한 값으로 수렴하는 결과를 얻었다. 그리고 상대밀도에 관계없이 압밀유효연직응력이 증가하면 액상화 저항이 감소하는 경향을 보였다. 또한 같은 압밀유효연직응력과 패각함유량에서 상대밀도가 높아질수록 액상화강도가 증가하는 것으로 나타났다.

• 동력기계공학회지
• /
• 제22권6호
• /
• pp.44-50
• /
• 2018

As a type of bolt with a spherical head, the ball stud is widely used as a part of a ball joint in steering or suspension systems in automobiles. Balls and studs are subjected to heat treatment suitable for each material; in particular, the shear strength of the ball stud must meet the specifications of the production company. This study evaluated the shear strength of joints according to the cooling method of ball studs subject to resistance welding. The shear stress of water cooling was higher than that of air cooling (as-received material). Note, however, th at oil cooling showed lower stress than that of as-received. When judged by standard deviation, mean, and coefficient of variation according to the arithmetic statistics and shape parameter as well as scale parameter, oil cooling is suitable.

• 한국지반공학회논문집
• /
• 제33권7호
• /
• pp.5-16
• /
• 2017

쏘일 네일링 공법은 비탈면 안정을 위해 네일의 인발 및 전단저항력을 이용하여 비탈면을 보강하는 가장 일반적인 공법이다. 국내의 쏘일 네일링 설계법은 인발저항만을 고려하고 전단저항에 대한 고려가 충분히 이루어지고 있지 않다. 네일의 경우 인장응력에 의한 효과가 지배적이나 원호파괴가 일어나는 비탈면의 경우 전단응력까지 고려하여 설계하는 것이 바람직하다. 최근 지반분야에서 네일의 전단저항 효과에 관한 연구들도 진행되고 있다. 하지만 아직까지는 쏘일 네일링의 전단보강 효과에 관한 연구는 많이 이루어지고 있지 않은 실정이다. 대부분이 네일의 재료, 형상, 시공방법 등의 개선을 통한 인발저항 증대에 관한 연구이다. 따라서 쏘일 네일링의 전단저항에 대한 연구 및 전단력을 증대시킬 수 있는 새로운 공법개발이 필요한 실정이다. 본 연구에서는 이형철근 외측에 패커를 설치한 후 가압식 그라우팅을 통해 돌기를 형성함으로써 전단저항력을 증대시킬 수 있는 새로운 쏘일 네일링 공법에 대하여 대형전단시험 및 한계평형해석을 수행하였다. 연구결과 돌기네일의 전단저항력은 일반네일에 비해 향상되였으며, 강도정수가 큰 지반에 적용하였을 때 효과적임을 확인할 수 있었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 사면안정학술발표회
• /
• pp.145-154
• /
• 2003

When a nail pulled out in dense, granular soil, the soil in the vicinity of the nail tends to dilate, but its dilatancy results in a normal stress concentration at the soil/nail interface, thereby increasing the pull-out resistance of the inclusion. It is thought to be occurring within the resistance zone where the soil mass is at stationary state and the reinforcement are held in position by the soil, due to the friction or bond. In this paper, A series of direct shear and interface tests were conducted by using so called‘Constant Normal Stiffness Test Apparatus’which was modified and improved from the conventional direct shear box test rig. Unlikely the normal shear box test, this enables to simulate the different constraint effects of surrounding soil during shear under the conditions of constant stress and volume, constant normal stiffness. The aim of the research programme is to get better understanding of pull-out bond mechanism, thus to explore the possibility of evaluating the pull-out bond capacity of soil/reinforcement at the preliminary design stage from the laboratory test.