• 한국축산식품학회지
• /
• 제38권5호
• /
• pp.970-980
• /
• 2018

We evaluated the effects of pre-cooking methods on the quality of reheated marinated pork loin. Frozen marinated pork loins cooked using various methods (boiling, grilling, pan frying, infrared cooking, and superheated steam cooking) were reheated in a microwave, and their pH, color, cooking loss, re-heating loss, total loss, thiobarbituric acid reactive substance (TBARS) value, sensory properties, and shear force were determined. Although all parameters varied with different cooking methods, lightness values and TBARS values showed the tendency to decrease and increase, respectively, after reheating. Superheated steam-cooked samples showed the lowest values of cooking loss, total loss, TBARS value, and shear force (p<0.05) and the highest lightness, redness, and yellowssness values and juiciness, chewiness, and overall acceptability scores (p<0.05). These results show that pre-cooking with superheated steam maintains the quality characteristics of marinated pork loin upon reheating. Therefore, pre-cooking with superheated steam may be beneficial for the commercial distribution of frozen cooked marinated pork loin.

• 열처리공학회지
• /
• 제6권1호
• /
• pp.9-16
• /
• 1993

To investigate the properties of diffusion bonding of 7050 Al alloy, the diffusion bonding joints have been produced in self-made diffusion bonding hot-press which admits a defined application of the bonding pressure during the heating phase and also rapid cooling after the bonding process with various bonding condition. The strength of the bond increases with increasing the bonding time and temperature. Shear test at toom temperature showed that high strength up to 70% that of parent metal (320 MPa), 220 MPa for the specimen bonded 14 hr at $560^{\circ}C$, with 3 MPa. In this case, however, there is large deformation more than 20% reduction in thickness. The results were correlated with joint characteristics found by optical microstructure and by fractography by SEM. When the strengths of the bonds are more than 50% that of parent metal, a great deal of dimples stretched along the direction of shear stress are observed over the fractured surface of the bond. On the microstructure of the bond line, initial mophology of the bond line disapeared for the grain boundary migration with increasing the bonding time.

• 한국식품과학회지
• /
• 제29권5호
• /
• pp.932-938
• /
• 1997

Changes in viscosity and dynamic theological properties of Job's-tears were measured by Bohlin dynamic tester as a function of moisture, and measurement was performed within a linear viscoelastic range. The result of the shear stress vs shear rate of Job's-tears at different moisture contents $(50{\sim}75%)$ was applied to mathematical models and Herschel-Bulkley model showed the highest correlation coefficient. Lower moisture content (55%) produced higher yield stress and consistency index, but lower flow behavior index, whereas higher moisture content showed reverse effects. Job's-tears with $50{\sim}70%$ moisture contents showed a higher storage modulus (G') than loss modulus (G') at all frequencies, showing a higher concentrated polymer characteristics. However, higher moisture content (>75%) showed crossover point between G' and G', and frequency dependency. As the moisture content was increased, the amount of viscoelastic properties such as G', G', complex viscosity decreased during heating, and initial temperature and miximum value of viscoelastic properties shifted to higher temperatures, representing the moisture-dependence of Job's-tears upon theological properties.

• 한국공작기계학회논문집
• /
• 제16권6호
• /
• pp.29-36
• /
• 2007

The present study examined the mechanical properties of the friction welding of Ni-Cr-Mo to SM45C. Friction welding was conducted at welding conditions of 2,000 rpm, friction pressure of 100MPa, friction time of 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0 seconds, upset pressure of 150MPa, and upset time of 3.0 seconds. When the friction time was 1.6 seconds, the maximum tensile strength of the friction weld happened to be 1,020MPa, which is 120% of the base material's tensile strength(850MPa). At the same condition, the maximum shear strength was 438MPa, which is equivalent to 103% of the base material's shear strength(425MPa). At the same condition, the maximum vickers hardness was Hv490 at Ni-Cr-Mo nearby weld interface, which is higher Hv40 than condition of the friction time 0.8 seconds, and the maximum vickers hardness was Hv305 from weld interface of SM45C, which is higher Hv12 than condition of the friction time 0.8 seconds. The results of microstructure analysis show that the structures of two base materials have fined and rearranged along a column due to heating and axial force during friction, which has affected in raising hardness and tensile strength.

• 한국식품과학회지
• /
• 제22권2호
• /
• pp.111-115
• /
• 1990

원료 성분조성이 다른 시판용 정맥 및 소맥된장의 두 종류 시료를 대상으로 하여 여러 농도의 물 현탁액 (50-200v/w%)을 조제하고 각 현탁액의 리올로지적 거동을 검토하였다. 각 시료 된장 현탁액은 모두 thixotropic 거동을 보였으며, 가수량이 125% 이하인 고농도 현탁액의 경우 전단상승곡선과 하강곡선이 교차하는 Figure-eight 현상을 나타내었다. 시료 모두 가열에 따라 겉보기 점도가 뚜렷한 증가 경향을 보였으며 단백질의 등전점 부근에서 겉보기 점도가 가장 높은점, 가수량 200%의 묽은 현탁액의 경우 $60^{\circ}C$이상으로 가열했을 때 Figure-eight 현상을 보이는 점 등을 종합하여 볼 때 점성거동은 단백질 존재상태와 밀접한 관련을 갖는 것으로 추정되었다.

• Applied Biological Chemistry
• /
• 제38권4호
• /
• pp.353-358
• /
• 1995

옥수수 전분(초기 수분함량 11.4%)을 $130{\sim}220^{\circ}C$에서 건열처리하여 DSC로 열분석한 결과 $190^{\circ}C$이상에서 호화엔탈피는 감소하였고 알칼리호화시 열처리온도가 상승할수록 점도가 증가하였다. $170^{\circ}C$이상에서 열처리 온도가 높아질수록 원료전분에 비하여 최고점도를 포함한 아밀로그램상의 모든 값들, 전분호화액의 전단응력과 겉보기점도, 점조도지수 및 항복응력은 감소하였다. $90^{\circ}C$에서 호화진행에 따라 모든 시료들의 겉보기 점도와 항복응력은 상당히 증가하였으며 $190^{\circ}C$시료는 특히 초기에 급증하였으나, 점조도지수는 약간 증가한 반면에, 유동거동지수값들은 큰 차이를 보이지않았다. 그러나 $220^{\circ}C$의 경우 모든 값들이 다른 시료들에 비하여 크게 낮았다.

• 터널과지하공간
• /
• 제33권3호
• /
• pp.189-207
• /
• 2023

In the present study, the thermoshearing experiment on a rough rock fracture were modeled using a three-dimensional grain-based distinct element model (GBDEM). The experiment was conducted by the Korea Institute of Construction Technology to investigate the progressive shear failure of fracture under the influence of thermal stress in a critical stress state. The numerical model employs an assembly of multiple polyhedral grains and their interfaces to represent the rock sample, and calculates the coupled thermo-mechanical behavior of the grains (blocks) and the interfaces (contacts) using 3DEC, a DEM code. The primary focus was on simulating the temperature evolution, generation of thermal stress, and shear and normal displacements of the fracture. Two fracture models, namely the mated fracture model and the unmated fracture model, were constructed based on the degree of surface matedness, and their respective behaviors were compared and analyzed. By leveraging the advantage of the DEM, the contact area between the fracture surfaces was continuously monitored during the simulation, enabling an examination of its influence on shear behavior. The numerical results demonstrated distinct differences depending on the degree of the surface matedness at the initial stage. In the mated fracture model, where the surfaces were in almost full contact, the characteristic stages of peak stress and residual stress commonly observed in shear behavior of natural rock joints were reasonably replicated, despite exhibiting discrepancies with the experimental results. The analysis of contact area variation over time confirmed that our numerical model effectively simulated the abrupt normal dilation and shear slip, stress softening phenomenon, and transition to the residual state that occur during the peak stress stage. The unmated fracture model, which closely resembled the experimental specimen, showed qualitative agreement with the experimental observations, including heat transfer characteristics, the progressive shear failure process induced by heating, and the increase in thermal stress. However, there were some mismatches between the numerical and experimental results regarding the onset of fracture slip and the magnitudes of fracture stress and displacement. This research was conducted as part of DECOVALEX-2023 Task G, and we expect the numerical model to be enhanced through continued collaboration with other research teams and validated in further studies.

• 대한기계학회논문집A
• /
• 제34권10호
• /
• pp.1367-1375
• /
• 2010

본 연구에서는 핫스템핑 소재로 사용되는 보론합금강판 22MnB5의 단일 겹치기 점용접에서 용접부의 강도 향상을 위한 최적화를 수행하였다. 최적화 과정은 다구찌 실험계획법에 의해 행해졌으며 공정변수는 전류, 가압력 및 통전시간으로 선정하였고, 잡음인자로서 핫스템핑 시 소재의 가열온도와 유지시간을 고려하였다. 가열조건에 따라 22MnB5 표면의 알루미늄 도금층과 모재 간의 확산반응에 의해 화합물층 두께에 산포가 발생하였으며 이러한 산포는 너겟의 형성에 영향을 미치는 것을 알 수 있었다. 한편 용접부의 인장전단강도를 목적함수로 하였을 때, 이러한 가열조건에 강건한 최적의 용접 조건은 전류 8kA, 가압력 4kN, 통전시간 18cycle로 선정되었다. 최적 조건의 검증 결과 용접부의 인장전단강도 는 32kN으로서 요구되는 규격인 23kN보다 크게 증가되었다.

• Journal of Welding and Joining
• /
• 제23권3호
• /
• pp.61-67
• /
• 2005

Since lead (Pb)-free solders for electronics have higher melting points than that of eutectic Sn-Pb solder, they need higher soldering temperatures. In order to decrease the soldering temperature we tried to coat Sn-Bi layer on $Sn-3.5\%Ag$ solder by electroplating, which applies the mechanism of transient liquid phase bonding to soldering. During heating Bi will diffuse into the $Sn-3.5\%Ag$ solder and this results in decreasing soldering temperature. As bonding samples, the 1608 capacitor electroplated with Sn, and PCB, its surface was finished with electroless-plated Ni/Au, were selected. The $Sn-95.7\%Bi$ coated Sn-3.5Ag was supplied as a solder between the capacitor and PCB land. The samples were reflowed at $220^{\circ}C$, which was lower than that of normal reflow temperature, $240\~250^{\circ}C$, for the Pb-free. As experimental result, the joint of $Sn-95.7\%Bi$ coated Sn-3.5Ag showed high shear strength. In the as-reflowed state, the shear strength of the coated solder showed 58.8N, whereas those of commercial ones were 37.2N (Sn-37Pb), 31.4N (Sn-3Ag-0.5Cu), and 40.2N (Sn-8Zn-3Bi). After thermal shock of 1000 cycles between $-40^{\circ}C$ and $+125^{\circ}C$, shear strength of the coated solder showed 56.8N, whereas the previous commercial solders were in the range of 32.3N and 45.1N. As the microstructures, in the solder $Ag_3Sn$ intermetallic compound (IMC), and along the bonded interface $Ni_3Sn_4$ IMC were observed.

• 한국터널지하공간학회 논문집
• /
• 제18권2호
• /
• pp.213-220
• /
• 2016

최근 제한된 국토 면적에 비해 늘어나고 있는 인구와 그에 따른 교통량 증가에 따라 효율적인 공간 이용의 필요성이 급증하고 있다. 이를 위하여 여러 가지 지하구조물 건설이 증가하고 있으며, 그 중 대표적인 것이 복층터널이다. 복층터널 건설시 터널 라이닝과 주위 지반이 접촉하게 되고, 그 사이에 차수, 보호 또는 지반보강의 목적으로 토목섬유를 시공하게 된다. 따라서 필연적으로 지반-토목섬유 접촉면이 형성되어 터널의 전단 거동에 큰 영향을 미치게 되며, 특히 지진과 같은 동적하중 재하시 그 거동은 매우 복잡해지므로 실험적 접근이 필수적이다. 본 연구에서는 터널 주위지반의 지하수 내 산성 및 중성과 같은 화학적 성분이 반복 전단하중 상태에서 지반-토목섬유 접촉면의 전단강도 감소에 미치는 영향을 실내 시험을 통하여 분석하였다. 또한 여러 가지 요인에 의하여 형성되는 지중 온도차를 고려하기 위하여 시료의 온도를 $20^{\circ}C$와 $40^{\circ}C$로 설정하여 온도에 의한 접촉면의 동적 전단특성을 고려하였다. 이를 위하여 접촉면 동적전단시험기를 이용하고 60일, 960일간 수침시킨 토목섬유와 흙 시료를 이용하여 반복 단순전단시험을 수행하였고, 그 결과를 교란상태개념을 이용하여 지반-토목섬유 접촉면의 전단강도 감소 특성을 확인하였다.