• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.6
• /
• pp.637-652
• /
• 2015

In the present work, a number of three-dimensional (3D) parametric numerical analyses have been carried out to study the influence of tunnelling on the behaviour of adjacent piles considering the transverse distance of the pile tip from the tunnel. Single piles and $5{\times}5$ piles inside a group with a spacing of 2.5d were considered, where d is the pile diameter. In the numerical modelling, several key issues, such as the tunnelling-induced pile settlements, the interface shear stresses, the relative shear displacements, the axial pile forces, the apparent factors of safety and zone of influence have been rigorously analysed. It has been found that when the piles are inside the influence zone, the pile head settlements are increased up to about 111% compared to those computed from the Greenfield condition. Larger pile settlements and smaller axial pile forces are induced on the piles inside the pile groups than those computed from the single piles since the piles responded as a block with the surrounding ground. Also tensile pile forces are induced associated with the upward resisting skin friction at the upper part of pile and the downward acting skin friction at the lower part of pile. On the contrary, when the piles were outside the influence zone, tunnelling-induced compressive pile forces developed. Based on computed load and displacement relation of the pile, the apparent factor of safety of the piles was reduced up to about 45%. Therefore the serviceability of the piles may be substantially reduced. The pile behaviour, when considering the single piles and the pile groups with regards to the influence zone, has been analysed by considering the key features in great details.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.35-41
• /
• 2007

This study was conducted to determine the effect of pH adjustment and addition of sodium chloride (NaCl) on quality characteristics of pork leg surimi. The pork leg surimi was manufactured with one of following pH 3.0 or pH 11.0 adjustment and contained 2% NaCl or not; C (Alaska pollack surimi, two times washing, 0% NaCl), T1 (pork leg surimi pH 3.0 adjustment, 0% NaCl), T2 (pork leg surimi, pH 3.0 adjustment, 2% NaCl), T3 (pork leg surimi, pH 11.0 adjustment 0% NaCl), T4 (pork leg surimi, pH 11.0 adjustment, 2% NaCl). The $L^*$ and W values was increased with increasing of pH value, but the $a^*$ and $b^*$ values lower. The W values were higher (p<0.05) as addition of NaCl, but $a^*$ and $b^*$ values were lower. In textural properties, the cohesiveness was increased with increasing of pH value, however with the exception of springiness all traits were higher (p<0.05) as addition of NaCl. The breaking force and gel strength was increased with increasing of pH value. The breaking force, gel strength and breaking force u deformation were higher as addition of NaCl, but shear force lower. In sensory evaluation, the tenderness was increased with increasing of pH value and all traits of sensory evaluation also were higher (p<0.05) as addition of NaCl. There were no differences in interaction of pH adjustment and without or with NaCl on color, textural properties, breaking force, deformation, gel strength, shear force and sensory evaluation of pork leg surimi. The color, textural and physical characteristics and sensory evaluation ot T2 and T4 were similar to treatment C. Therefore, the pH 11.0 and 2% NaCl addition on process of manufacture of pork leg surimi would be recommended.

• Korean Journal of Poultry Science
• /
• v.42 no.4
• /
• pp.347-352
• /
• 2015

This study was first conducted to investigate the effect of post-mortem storage time of chicken meat on the quality of chicken breast, and to determine whether the current grading rule that is 'using the chicken meat within 2 day post-mortem (PM)' is appropriate or not at meat processing plants. Different methods such as freshness, lightness ($L^*$), total number of microbes, 2-thiobarbituric acid reactive substances (TBARS), shear force and cooking loss were performed. Forty samples of different PM time (0~4 day) of chicken meat were stored in the refrigerator ($3^{\circ}C$). As a result of comparing the chicken meat of 2 day and 3 day PM, torrymeter value was 6.9 and 7.0, respectively. The other values are also as follows: lightness ($L^*$) 60.22 and 60.51, total number of microbes 4.20 and $4.31log_{10}CFU/g$, TBARS value 0.056 and 0.071 mg MDA/kg, shear force 1.43 and $1.59kg/cm^2$, and cooking loss 17.24 and 15.66%, respectively. As a result, these two groups were not significantly different (P<0.05). TBARS value of the chicken meat of 4 day PM was 0.088 mg MDA/kg which is significantly higher compared to 2~3 day PM (P<0.05). Thus, the result of the study suggests that using the chicken meat within 3 day PM is also possible. If the grading rule that is 'using the chicken meat within 2 day post-mortem (PM)' is changed to 3 day PM, it will allow processing plants and distributors to more flexibly use or distribute chicken meat.

• Applied Chemistry for Engineering
• /
• v.5 no.4
• /
• pp.681-697
• /
• 1994

The enzymatic hydrolysate of gelatin extracted from fish skin was fractionated and recycled through the membrane reactor according to the molecular weight for the purpose of using as functional material. In addition, the enzymatic hydrolysis conditions of gelatin, enzyme stability by membrane and mechanical shear, and effect on the long-term operational stability of the recycle membrane reactor were investigated. Using the pH-drop technique, Alcalase, pronase E and collagenase were identified as the most suitable enzymes for the hydrolysis of fish skin gelatin. The optimum hydrolysis conditions in the 1st-step membrane reactor(1st-SMR) by Alcalase were enzyme concentration 0.2mg/ml, substrate-to-enzyme ratio(S/E) 50(w/w), $50^{\circ}C$, pH 8.0, reaction volume 600ml and flow rate 6.14ml/min. In the 2nd-SMR by pronase E were enzyme concentration 0.3mg/ml, S/E 33(w/w), $50^{\circ}C$, pH 8.0, reaction volume 600ml and flow rate 6.14ml/min. In the case of 3rd-SMR, enzyme concentration 0.1mg/ml, S/E 100(w/w), $37^{\circ}C$, pH 7.5, reaction volume 600ml and flow rate 10ml/min. Decreased enzyme activities by mechanical shear and membrane were 30% and 15% in the 1st-SMR, were 14% and 5% in the 2nd-SMR, and 18% and 8% in the 3rd-SMR, respectively. Under the optimum conditions, the degree of hydrolysis in the 1st, 2nd and 3rd-SMR were 3.5%(Kjeldahl method, 87%), 3.1%(77%) and 2.7%(70%), respectively. The productivity of hydrolysate in the continuous three-step membrane reactor was 430mg per enzyme(mg) for 10 times of volume replacements.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.4
• /
• pp.791-799
• /
• 1996

The purpose of this study was to compare the shear bond strength of adhesion bridge by various resin cements. One hundred and foully 1st premolars were used. The teeth were cut below 2mm from CEJ and the coronal portions were used. The coronal portions were embeded with the acrylic resin and trimmed with sic paper until the flat plane with ${\phi}$ 4mm above acrylic resin sticks in height 5mm were casted with nonprecious metal and the using surfaces were treated with sic paper from #200 to #1200 and polished with alminum oxide paste. And then, the using surfaces were sandblasted and treated with the electrochemical etching. The teeth were divided into three groups of fourty two each. In group I, teeth and specimens were cemented with Panavia 21 In group II, teeth and specimens were cemented with Superbond In group I, teeth and specimens were cemented with All-Bond & composite resin cement Each group was subdivided into three subgroups according to the storage period ; one-day storage, fifteen-day storage, and thirty-day storage. The special jig was made. Then, the specimen and jig were mounted to Instron Universal Testing Machine and the failure were measured. The results were as follows. 1. There was statisfically significant difference between the failure loads of group I and group II and III after one day storage(P<0.01), 2. There was statisfically significant difference between the failure loads of group II and group I and III and between group I and group III at fifteen day storage(P<0.01). 3. There was statisfically significant difference between the failure loads of group I and II and group III after thirty day storage(P<0.01). 4. There was statisfically significant difference between the failure loads of one day storage and fifteen and thirty days storages in group III (P<0.01).

• Korean Journal of Poultry Science
• /
• v.43 no.4
• /
• pp.197-206
• /
• 2016

This work was carried out to investigate effects of the freezing/thawing method on duck meat kept in a freezer for a month. The meats used were breast muscle collected from Korean native ducks (KND) that were fed for 8 weeks (2.8 kg of live weight). Forty-five samples were used after being frozen in storage for one month and were then divided into 5 treatments (3 replications/treatment, 3 samples/replication). Five treatments (CON, FFFT, FFST, SFFT and SFST) were control groups (CON) and four were experimental groups, using $2{\times}2$ complex factors with two freezing methods (fast freezing, FF, $-50^{\circ}C$ in a deep freezer; slow freezing, SF, $-20^{\circ}C$ in a common freezer) and two thawing methods (fast thawing, FT, 5 h $12^{\circ}C$ with flow water; slow thawing, ST, 24 h $5^{\circ}C$ in a refrigerator). Lightness of KND meat in FF and FT groups was lower than that of control (P<0.05). Yellowness of KND meat of the ST group was higher than that of control (P<0.05). Cooking loss (CL) and water holding capacity (WHC) of KND meat in the control were lower than those of the freezing and thawing groups (P<0.01, P<0.05), but shear force (SF) of the control was higher than that of other groups (P<0.01). Moisture content of the ST group was higher than that of the FT group (P<0.05), and protein content of the FF group was higher than that of control (P<0.05). Stearic acid (C18:0) of the SF group was higher than that of the FF group (P<0.05). Arachidonic acid (C20:4n6) of control was higher than that of the SF and ST groups (P<0.01, P<0.05). Alanine, aspartic acid, glutamic acid, serine, and tyrosine content of the control were lower than that of the freezing and thawing groups (P<0.05). These results show that freezing and thawing methods affect meat color, shear force, cooking loss, and WHC-related water content.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.399-406
• /
• 2000

The effect of inlay surface treatment on bonding was investigated when resin inlay was bonded to resin-modified glass-ionomer base with resin cement. For the preparation of glass-ionomer base, resin-modified glass-ionomer cement (Fuji II LC, GC Co., Japan) was filled in class I cavities of 7mm in diameter and 2mm in depth made in plastic molds. Eighty eight resin inlay specimens were made with Charisma$^{(R)}$ (Kulzer, Germany) and then randomly assigned to the four different surface treatment conditions: Group I, $50{\mu}m$ aluminium oxide sandblasting and silane treatment ; Group II, silane treatment alone ; Group III, sandblasting alone, and Group IV (control), no surface treatment. After a dentin bonding agent with primer (One-Step$^{TM}$, Bisco Inc., IL., U.S.A.) was applied to bonding surface of resin inlay and base, resin inlay were cemented to glass-ionomer base with a resin cement (Choice$^{TM}$, Bisco Inc., IL., U.S.A.). Shear bond strengths of each specimens were measured using Instron universal testing machine (4202 Instron, lnstron Co., U.S.A.) and fractured surfaces were examined under the stereoscope. Statistical analysis was done with one-way ANOVA and Dunkan's multiple range test. The results were as follows: 1. Sandblasting and silane treatment provided the greatest bond strength(10.56${\pm}$1.95 MPa), and showed a significantly greater bond strength than sandblasting alone or no treatment (p<0.05). 2. Silane treatment provided a significantly greater bond strength(9.77${\pm}$2.04 MPa) than sandblasting alone or no treatment (p<0.05). However, there was no significant difference in bond strength between sandblasting treatment and silane one (p>0.05). 3. Sandblasting alone provided no significant difference in bond strength from no treatment (p>0.05). 4. Stereoscopic examination of fractured surface showed that sandblasting and silane treatment or silane treatment alone had more cohesive failure mode than adhesive failure mode. 5. In relationship between shear bond strength and failure mode, cohesive failure occurred more frequently as bond strength increased.

• Journal of the Korea Concrete Institute
• /
• v.23 no.6
• /
• pp.711-722
• /
• 2011

Beam-column gravity or Intermediate Moment frames subjected to unexpected large displacements are vulnerable when no seismic details are provided, which is typical. Conversely, economic efficiency of those frames is decreased if unnecessary special detailing is applied as the beam and column size becomes quite large and steel congestion is caused by joint transverse reinforcement in beam-column connections. Moderate seismic design is used in Korea for beam-column connections of buildings with structural walls, which are to be destroyed when the unexpected large earthquake occurs. Nonetheless, performance of such beamcolumn connections may be substantially improved by the addition of steel fibers. This study was conducted to investigate the effect of steel fibers in reinforced concrete exterior beam-column connections and possibility for the replacement of some joint transverse reinforcement. Ten half-scale beam-column connections with non-seismic details were tested under cyclic loads with two cycles at each drift up to 19 cycles. Main test parameters used were the volume ratio of steel fibers (0%, 1%, 1.5%) and joint transverse reinforcement amount. The test results show that maximum capacity, energy dissipation capacity, shear strength and bond condition are improved with the application of steel fibers to substitute transverse reinforcement of beam-column connections. Furthermore, several shear strength equations for exterior connections were examined, including the proposed equation for steel fiber-reinforced concrete exterior connections with non-seismic details.

• Journal of Animal Science and Technology
• /
• v.50 no.3
• /
• pp.373-380
• /
• 2008

This study was undertaken to investigate the effects of feed withdrawal time(FWT) before transport in farm(<2 hrs, 2~4 hrs, 4~6 hrs) and total feed withdrawal time(TFWT) before slaughter(<8 hrs, 8~12 hrs, >12 hrs) on carcass defects, grades and meat quality of broilers. FWT of 2~4 hrs before transport in the farm showed lower incidences of dead-on-arrival chicks(p<0.05) and bruising chicks, and a little higher incidences of 1st or 2nd carcass grade compared to shorter than 2 hrs or 4~6 hrs of FWT in the farm. In the meat quality of breast meat, FWT of 2~4 hrs in the farm tended to show higher pH and water holding capacity(WHC), and lower drip loss, cooking loss and shear force values compared to shorter than 2 hrs or 4~6 hrs of FWT in the farm. In the total microbial counts of breast meat during 7 days of cooler storage, FWT of 2~4 hrs in the farm showed significantly lower value than shorter than 2 hrs of FWT in the farm. In the carcass defects and grades by TFWT before slaughter, TFWT shorter than 8hrs showed lower(p<0.05) incidences of dead-on-arrival chicks and bruising chicks, and higher(p<0.05) incidences of 1st carcass grade than TFWT longer than 12 hrs before slaughter. In the meat quality of broiler breast meat, TFWT longer than 12hrs before slaughter showed lower(p<0.05) pH and WHC values, and a little higher drip loss, cooking loss and shear force values compared to TFWT shorter than 8 hrs or 8~12 hrs before slaughter. In the total microbial counts of broiler breast meat during 7 days of cooler storage, TFWT longer than 12 hrs before slaughter tended to show higher value than TFWT shorter than 8 hrs or 8~12 hrs before slaughter. As a result, 2~4 hrs of feed withdrawal time before transport in the farm and total feed withdrawal time shorter than 8hrs or 8~12hrs before slaughter could be recommended for the production of high quality broiler meat.

• Food Science of Animal Resources
• /
• v.28 no.4
• /
• pp.480-485
• /
• 2008

In this experiment, 5 treatments consisted of control, probiotics (0.2%; T1), illite (1.0%; T2), activated carbon (1.0%; T3), and hardwood vinegar (1.0%; T4) as diets of chicken were evaluated for 35 days through feeding of 200 male chickens (Arbor Acre Broiler). Thigh muscle from slaughtered chickens were analyzed on pH, volatile basic nitrogen (VBN), thiobarbituric acid reactive substance (TBARS), shear force, and meat color during 10 d of cold storage at $4{\pm}1^{\circ}C$. Groups of T3 and T4 showed higher pH levels compared to the control group, and T4 showed significantly higher value. Over the storage period, all treatment groups showed increase in pH (p<0.05). Values of VBN of T1, T3, and T4 were lower than those of the control group and T2 up to 7 d of storage (p<0.05), but there was no significance at 10 d of storage. Values of TBARS of T3 and T4 were lower than the control group, T1, and T2, while all treated groups showed rapid increase of TBARS values over storage period (p<0.05). Shear force did not show significant difference among treated groups, but it was decreased over storage. Lightness of meat color (L) in treated groups was higher than the control, and T4 showed the highest value during entire storage period (p<0.05). Yellowness levels (b) of T3 and T4 were higher than the control group. These results may suggest the improvement of chicken meat quality and shelf life via the addition 1% activated carbon and 1% hardwood vinegar into feed.