• Journal of the Institute of Convergence Signal Processing
• /
• v.8 no.2
• /
• pp.91-97
• /
• 2007

Points of sharp variations in signals are the most important factors when analyzing the features of signals. And in the image, edges include diverse information such as the locations, shape and material. There have been a variety of researches on edge detections, among them, methods based on convolution in the spatial domain have been most popular. However at the early stage of the method, if the noise and many kinds of edges exist in the image, it is not easy to separate edges selectively from corrupted images by noise. In meantime, the wavelet transform for multiscale edge detection is being applied widely to analyze the properties of images in various fields. In this paper, we suggest a robust wavelet-based method, which selectively detects line-edge elements from images in the presence of noise.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2089-2104
• /
• 1995

A novel and efficient cutter path planning method for machining intricately shaped curved surfaces, called the steepest directed tree method, is presented. The curved surface is defined by triangular facets, the density and structure of which are determined by the intricacy and form accuracy of the surface. Geometrical form definition and recognition of the topological features are used to connect the nodes of the triangulated surface meshes for the successive and interconnected steepest pathways, which makes good use of end milling characteristics. The planetary cutter centers are determined to locate along smoothly changing paths and then the height values of the cutter are adjusted to avoid surface interference. Several machined examples of intersecting and intricate surfaces are presented to illustrate the benefits of the new approach. It is shown that due to more consistent geometry matching between cutter and surface(in comparison with the current CC Cartesian method) surface finish can be typically improved. Moreover, the material in concave fillets which is difficult to be removed by ball mills can be removed efficiently. The built-in positioning of cutter to avoid interference runs minutely in the sharp and discontinuous regions. The steepest upward movement of the cutter gives a stable dynamic cutting state and allows increase in the feedrate and spindle speed while remaining the stable cutting state.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.19 no.3
• /
• pp.302-312
• /
• 2012

Purpose: The purpose of this study was to investigate the level of knowledge, attitude and compliance with standard precautions and to identify predicting factors of compliance with standard precautions in ICU and ER nurses. Methods: The participants were 228 ICU and ER nurses working in one of three university hospitals and one general hospital. Collected data included general characteristics, features related to infection risk, and knowledge, attitude and compliance with standard precautions. For the final analysis, 218 questionnaires were used. Results: Within the previous one year, 103 (47.3%) nurses experienced pricking injury from syringe needles or other sharp materials, 111 (50.9%) nurses reported exposure to patients' blood and body fluid. In general, the scores for knowledge, attitude and compliance were all high. Compliance scores for nurses in intensive care units were significantly higher than those of nurses in emergency. There were significant correlations of knowledge, attitude, and compliance with standard precautions. Attitude and work place were significant factors predicting compliance with standard precautions. Conclusion: The results indicate that to increase nurse's compliance with standard precautions, continuous efforts to enhance positive attitudes and at the same time, improve work environments and use individualized approaches based on the work units are needed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.158-163
• /
• 2002

This paper presents a multiple sensor system for rapid and high-precision coordinate data acquisition in the OMM (On-machine measurement) process. In this research, three sensors (touch probe, laser, and vision sensor) are integrated to obtain more accurate measuring results. The touch-type probe has high accuracy, but is time-consuming. Vision sensor can acquire many point data rapidly over a spatial range but its accuracy is less than other sensors. Also, it is not possible to acquire data for invisible areas. Laser sensor has medium accuracy and measuring speed among the sensors, and can acquire data for sharp or rounded edge and the features with very small holes and/or grooves. However, it has range- constraints to use because of its system structure. In this research, a new optimum sensor integration method for OMM is proposed by integrating the multiple-sensor to accomplish mote effective inspection planning. To verify the effectiveness of the proposed method, simulation and experimental works are performed, and the results are analyzed.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.3
• /
• pp.28-34
• /
• 1999

In this paper. we propose the method of Scene Change Detection for video sequence using the DC components and the moving vectors in the Macro Blocks in the DCT blocks. The proposed method detects the Scene Change which would not be related with the specific sequences in the compressed MPEG domain. To do this. we define new metrics for Scene Change Detection using the features of picture component and detect the exact Scene Change point of B-pictures using the characteristics of B-picture's sharp response for the moving vectors. In brief, we will detect the cut point using I-picture and the gradual scene changes such as dissolve, fade, wipe, etc. As a results, our proposed method shows good test results for the various MPEG sequences.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.442-446
• /
• 1995

Electronic structures of Fe overlayers on Cr(Fe/Cr) films, with an Fe coverage of $1-20{\AA}$, have been investigated by using photoemission spectroscopy. Experimental results are compared with supercell band structure calculations for a system with monolayer (ML) Fe on each side of five layer Cr, Fe(1ML)/Cr(5ML)/Fe(1ML). The extracted Fe 3d partial spectral weight in Fe/Cr exhibits very interesting features for very thin Fe overlayers. First, a sharp emissionnear the Fermi energy is observed, which is expected to originate primarily from hybridization between Fe and Cr 3d electrons at the Fe/Cr interface, and partially from the Fe 3d surface states in the Fe overlayer. Second, other structures are observed at higher binding energies which resemble the Cr 3d valence bands, also suggesting large hybridization between Fe and Cr 3d states at the Fe/Cr interface. These conjectures are confirmed by band structure calculations for Fe(1ML)/Cr(5ML)/Fe(1ML).

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1266-1276
• /
• 2021

The mask parameters of a coded aperture are critical design features when optimizing the performance of a gamma-ray camera. In this paper, experiments and Monte Carlo simulations were performed to derive the minimum detectable activity (MDA) when one seeks a real-time imaging capability. First, the impact of the thickness of the modified uniformly redundant array (MURA) mask on the image quality is quantified, and the imaging of point, line, and surface radiation sources is demonstrated using both cross-correlation (CC) and maximum likelihood expectation maximization (MLEM) methods. Second, the minimum detectable activity is also derived for real-time imaging by altering the factors used in the image quality assessment, consisting of the peak-to-noise ratio (PSNR), the normalized mean square error (NMSE), the spatial resolution (full width at half maximum; FWHM), and the structural similarity (SSIM), all evaluated as a function of energy and mask thickness. Sufficiently sharp images were reconstructed when the mask thickness was approximately 2 cm for a source energy between 30 keV and 1.5 MeV and the minimum detectable activity for real-time imaging was 23.7 MBq at 1 m distance for a 1 s collection time.

• The Korean Journal of Cytopathology
• /
• v.17 no.2
• /
• pp.126-135
• /
• 2006

To study the differentiating cytomorphological features of Hodgkin lymphoma (HL) and anaplastic large cell lymphoma (ALCL) using fine needle aspiration cytology (FNAC), cytomorphological features of 16 patients with HL (n=8) or ALCL (n=8) were analyzed. In the initial cytological diagnosis prior to biopsy, HLs were properly diagnosed in 4 out of 8 cases (4 HL, 2 atypical, 2 benign), whereas all ALCL were diagnosed as malignancies. However, correct diagnosis of non-Hodgkin lymphoma (NHL) was made in only two ALCL patients (2 NHL, 1 HL, 1 sarcoma, 4 malignancy without specific type). Overall, the percentage of large abnormal cells ranged from 30% to 90% in ALCL except for one case, whereas it was less than 5% in all 8 HL. A spectrum of atypical cells was more characteristic of ALCL. In contrast, HL showed an sharp difference between reactive lymphoid cells and neoplastic ones (bimorphic pattern). Moreover, the emergence of kidney-shaped abnormal cells or wreath-like multinucleated cells was helpful in diagnosing ALCL. The combination of thesefeatures would be useful in differentiating HL and ALCL. Nevertheless, these two types of lymphomas cannot be definitely distinguished based on cytomorphological features alone. Therefore, the aim of FNAC would be to suggest a specific diagnosis and indicate the need for a biopsy.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.9
• /
• pp.4491-4501
• /
• 2016

Verruco-papillary lesions (VPLs) of the oral cavity described in the literature involve a spectrum of conditions including squamous papilloma, verruca vulgaris, focal epithelial hyperplasia, condyloma, proliferative verrucous leukoplakia and verrucous carcinoma. A majority of the VPLs are slow growing, benign in nature and have a viral aetiology. Virus associated benign mucosal outgrowths are not too difficult to diagnose either clinically or by microscopy. Apart from virus-associated lesions, VPLs harboring malignant potential or behaviour such as verrucous carcinoma, proliferative verrucous leukoplakia, oral verrucous hyperplasia (OVH), oral papillary squamous cell carcinoma (PSCC) and oral conventional squamous cell carcinoma with papillary features (CSCC) need to be further clarified for better understanding of their predictable biologic behavior and appropriate treatment. Current understanding of potentially malignant VPLs is perplexing and is primarily attributed to the use of confusing and unsatisfactory terminology. In particular, the condition referred to as oral verrucous hyperplasia (OVH) poses a major diagnostic challenge. OVH represents a histopathological entity whose clinical features are not well recognised and is usually clinically indistinguishable from a verrucous carcinoma and a PSCC or a CSCC. A consensus report published by an expert working group from South Asia as an outcome of the 'First Asian Regional Meeting on the Terminology and Criteria for Verruco-papillary Lesions of the Oral Cavity' held in Kuala Lumpur, Malaysia, recognised the clinical description of these OVH as a new entity named 'Exophytic Verrucous Hyperplasia'. Previously described clinical features of OVH such as the 'blunt' or 'sharp' variants; and the 'mass' or 'plaque' variants can now collectively fall under this newly described entity. This paper discusses in detail the application of the standardized criteria guidelines of 'Exophytic Verrucous Hyperplasia' as published by the expert group which will enable clinicians and pathologists to uniformly interpret their pool of OVH cases and facilitate a better understanding of OVH malignant potential.

• Wind and Structures
• /
• v.34 no.1
• /
• pp.115-125
• /
• 2022

The high-Reynolds number flow around a rectangular cylinder, having streamwise to crossflow length ratio equal to 5 is analyzed in the present paper. The flow is characterized by shear-layer separation from the upstream edges. Vortical structures of different size form from the roll-up of these shear layers, move downstream and interact with the classical vortex shedding further downstream in the wake. The corresponding mean flow is characterized by a recirculation region along the lateral surface of the cylinder, ending by mean flow reattachment close to the trailing edge. The mean flow features on the cylinder side have been shown to be highly sensitive to set-up parameters both in numerical simulations and in experiments. The results of 21 Large Eddy Simulations (LES) are analyzed herein to highlight the impact of the lateral mean recirculation characteristics on the near-wake flow features and on some bulk quantities. The considered simulations have been carried out at Reynolds number Re=DU_∞/ν=40 000, being D the crossflow dimension, U_∞ the freestream velocity and ν the kinematic viscosity of air; the flow is set to have zero angle of attack. Some simulations are carried out with sharp edges (Mariotti et al. 2017), others with different values of the rounding of the upstream edges (Rocchio et al. 2020) and an additional LES is carried out to match the value of the roundness of the upstream edges in the experiments in Pasqualetto et al. (2022). The dimensions of the mean recirculation zone vary considerably in these simulations, allowing us to single out meaningful trends. The streamwise length of the lateral mean recirculation and the streamwise distance from the upstream edge of its center are the parameters controlling the considered quantities. The wake width increases linearly with these parameters, while the vortex-shedding non-dimensional frequency shows a linear decrease. The drag coefficient also linearly decreases with increasing the recirculation length and this is due to a reduction of the suctions on the base. However, the overall variation of C_D is small. Finally, a significant, and once again linear, increase of the fluctuations of the lift coefficient is found for increasing the mean recirculation streamwise length.