• Journal of Information Science Theory and Practice
• /
• v.9 no.3
• /
• pp.1-13
• /
• 2021

In the current smart device-based information environment, information utilization is closely related to social capital. Additionally, the smart divide that occurs owing to the differences in use of smart devices has a significant influence on social capital. In this respect, this research empirically analyzed how the smart divide affects social capital construction. The study found that the level of and proficiency in using smart devices and diversity of the information formats used through smart devices affect social capital construction. Further, people who fully utilize smart devices can enhance their participation in social activities, social networks, and reciprocal activities, leading people to construct social capital in a wider range. Contrarily, those who are unable to use smart devices adequately may be disadvantaged in terms of the opportunity to construct social capital and share public interests. Thus, to maximize the intrinsic value of social capital, it is necessary to consider the factors of the smart divide as a complicated and multi-faceted digital divide and the ways to utilize social capital as a driving force for integrating society, and not as a mechanism for dividing members of society.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.1
• /
• pp.33-40
• /
• 2014

In this study the cylinder liner deformation which is one of the most influencing factors in a diesel engine oil consumption was performed by the finite element analysis on the basic designed structure consisting of the cylinder block, head and liners under the conditions of assembly, thermal and gas loads. Compared with a large number of other cylinder blocks showing remarkable harmonic orders of the liner distortion, results are excellent. Namely. the higher harmonic order amplitudes of the radial liner deformation amount to 1 ~ 2㎛ maximally. The main reason lies in the relatively large wall thickness of the liner which amounts to 8.2% of the bore diameter. Besides, a very stiff and symmetrical cylinder block design in combination with a bolt force introduction approximately 1.5mm below the block top deck have a further share on these results. Therefore excellent low oil consumption can be expected.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.3
• /
• pp.235-240
• /
• 2018

ICT converged smart factory started from German Industry 4.0 has been the driving force for the $4^{th}$ Industrial Revolution and the center of manufacturing innovation for major industrial countries. It will be developed according to industry characteristics of each country. Korea is relatively later than other competing countries in the smart factory area. So, the government is establishing related policy and tendering all sorts of supports for smart factory mainly to the small and medium-sized enterprises to spread over the manufacturing industry. It is necessary for government to categorize among similar manufacturing industry and make them share digitalized production information mutually. It will be more effective method for securing global competitiveness than the uniform support. Also, large companies need to establish cloud based production forecasting system over similar industry and share it with other companies rather than expansion of individual smart factory. Mutual development in the manufacturing industry will be realized when the small and medium-sized enterprises and large companies take part in the cooperating ground of smart factory.

• The Journal of Society for e-Business Studies
• /
• v.15 no.4
• /
• pp.181-195
• /
• 2010

The participation and share between personal users are the driving force of Web 2.0, and easily found in blog, social network, collective intelligence, social bookmarking and tagging. Among those applications, the social bookmarking lets Internet users to store bookmarks online and share them, and provides various services based on shared bookmarks which people think important.Delicious.com is the representative site of social bookmarking services, and provides a bookmark search service by using tags which users attach to the bookmarks. Our paper suggests a method re-ranking the ranks from Delicious.com based on user tags in order to provide personalized bookmark recommendations. Moreover, a method to consider bookmarks which have tags not directly related to the user query keywords is suggested by using tag network based on Jaccard similarity coefficient. The performance of suggested system is verified with experiments that compare the ranks by Delicious.com with new ranks of our system.

• Animal Bioscience
• /
• v.34 no.5
• /
• pp.914-921
• /
• 2021

Objective: The objective of this study was to compare growth performance, carcass traits and meat quality in young bulls, steers and heifers produced by crossing Limousin bulls with Holstein-Friesian cows, fattened semi-intensively and slaughtered at 18 months of age. Methods: Thirty-one young calves were reared in a conventional production system, and were fed milk replacer, hay and concentrate. At 6 months of age, the animals were divided into groups based on gender, and were fed a total mixed ration composed of grass silage, concentrates I and II in a semi-intensive production system. At the end of the fattening period (18 months), the animals were slaughtered, carcass quality was evaluated, and samples of musculus longissimus thoracis were collected to determine the proximate composition and quality of meat. Results: Bulls were characterized by the highest percentage share of the most valuable cuts in the carcass, and three-rib sections from bull carcasses had the highest lean meat content with low intramuscular fat content (0.93%). No significant differences in carcass conformation, dressing percentage or the percentage share of round in the right half-carcass were found between bulls vs. steers and heifers. Heifers and steers had higher carcass fat content than bulls, which had a positive influence on the sensory properties of beef. In comparison with the meat of bulls, the meat of steers and heifers was characterized by more desirable physical properties and sensory attributes (water-holding capacity, shear force, color lightness, aroma, juiciness, tenderness, flavor). Conclusion: Under the semi-intensive production system, heifers and steers had higher carcass fat content than bulls, which had a positive effect on the sensory properties of beef. Bulls are better suited for intensive systems, which contribute to improving the quality of their meat. The results of this study may encourage producers to breed steers and heifers for beef.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.2
• /
• pp.222-227
• /
• 2007

This study was carried out to investigate the influence of feeding eosungcho (Houttuynia cordata Thunb) powder on the meat quality of porks at chilled storage. Experimental groups were divided into control group (0%, C), 5% (T1) and 10% (T2) eosungcho powder feeding group, and then administered for 12 weeks. The results of sensory evaluation for softening value and scorched smell showed the highest preference in T1 group. Overall acceptability was also the highest in T1 group than the others. Physicochemical components were analyzed for pork loins that were stored at $4^{\circ}C$ for 23 days after vacuum packing. The moisture contents of pork loins were higher in T1 group than the others. Crude lipid contents were lower in T1 and T2 groups than the control group. The pH values were not significantly different in experimental groups during storage days. The Hunt L and a values increased significantly according to storage days. The Hunt b value was increased for the initial storage days but it did not change after 9 storage days. The Warmer-Bratzler share force of all experimental groups were greatly decreased between 2 and 9 storage days and then little exchanged afterwards.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.370-379
• /
• 2020

This study examined the growth characteristics and competitive advantages of Korea's tourism industry compared to other Northeast Asian countries using the Balassa Indices and Shift-Share method. The analysis results showed that the growth of Korea's tourism industry over the past decade was due mainly to external factors, such as the growth of the global economy and the expansion of the tourism sector, while the role of growth momentum of the tourism industry itself was insignificant. Employment in Korea's tourism industry has shown relatively higher increasing rates compared to the rates of the total amount of sales and value-adding. This appears to be caused by the decreased absorption of the labor force in the tourism industry due to the overall capacity of job creation. (Ed note: This sentence was unclear. Please check the edits.)The competitive advantage of Korea's tourism industry has been strengthened over the past decade, but it is still inferior to other countries. The travel account balance showed that the economic size of the Chinese tourism sector had grown rapidly over the past decade, but the competitive advantage of the sector has been weakened. On the other hand, the economic size of the Japanese tourism sector has shown sluggish growth, while its competitive advantage has been strengthened significantly.

• Korean Journal of Cleft Lip And Palate
• /
• v.12 no.1
• /
• pp.21-32
• /
• 2009

Generally, an adult cleft lip or/and palate patient shows some amount of maxillary deficiency due to limitation of bony growth caused by heavy scars resulted from previous operations such as a cheiloplasty and/or a palatoplasty at an early child age. To solve the problem, advancement of the maxilla is usually required during orthognathic surgery. However, severe tensional force resulted from heavy scars on the palate and/or the lip, as well as the bony defect at the cleft area limited sufficient advancement of the maxillary segment and finally caused relapse of the reposed maxilla. Therefore, distraction osteogenesis of the maxilla was introduced for the successful maxillary advancement inthose kinds of patients. As both hard and soft tissues can be simultaneously and gradually extended with this technique, tensional force caused by heavy scars opposed to forward movement of the maxilla can be reduced to an extent not to develop severe relapse of the advanced maxilla. Since distraction osteogenesis of the maxilla was applied as one of standard protocols for the treatment of the patients with severe maxillary hypoplasia dueto cleft lip and/or palate, the devices for the distraction was improved to control the vectors of distraction with better and more stable. We have treated a 23-year-old male cleft patient with a severe maxillary hypoplasia using a newly developed a maxillary distraction device and a RP model for a pre-operative simulation surgery. As a result, we could successfully move the maxilla as we designed pre-operatively and also reduce much of operation time. Therefore, we report of the case to share our experience with colleagues.

• Structural Engineering and Mechanics
• /
• v.76 no.3
• /
• pp.311-324
• /
• 2020

Until now, a comparative study on fully and partially-connected steel shear walls leading to enhancing strength and stiffness reduction of partially-connected steel plate shear wall structures has not been reported. In this paper a number of 4-story and 8-story steel plate shear walls, are considered with three different connection details of infill plate to surrounding frame. The specimens are modeled using nonlinear finite element method verified excellently with the experimental results and analyzed under monotonic loading. A comparison between initial stiffness and shear strength of models as well as percentage of shear force by model boundary frame and infill plate are performed. Moreover, a comparison between energy dissipation, ductility factor and distribution of Von-Mises stresses of models are presented. According to the results, the initial stiffness, shear resistance, energy dissipation and ductility of the models with beam-only connected infill plates (SSW-BO) is found to be about 53%, 12%, 15% and 48% on average smaller than those of models with fully-connected infill plates (SPSW), respectively. However, performance characteristics of semi-supported steel shear walls (SSSW) containing secondary columns by simultaneously decreasing boundary frame strength and increasing thickness of infill plates are comparable to those of SPSWs. Results show that by using secondary columns as well as increasing thickness of infill plates, the stress demands on boundary frame decreases substantially by as much as 35%. A significant increase in infill plate share on shear capacity by as much as 95% and 72% progress for the 4-story SSW-BO and 8-story SSSW8, respectively, as compared with non-strengthened counterparts. A similar trend is achieved by strengthening secondary columns of 4-story SSSW leading to an increase of 50% in shear force contribution of infill plate.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2567-2572
• /
• 2007

The suppression of fluid force acting on a square prism near plane wall was studied by attaching fences on the corners of the prism. The height of the fence was 10% of the square width and the range of Reynolds number considered was Re=$2.0{\times}10^4$. The experimental parameters were the attaching position and numbers of fences, the space ratios G/B(G/B=0.1${\sim}$1.2) between prism and plane wall. The average drag coefficients were increased and the average lift coefficients were decreased and increased with the space ratios toward plane wall. The drag of the prism was reduced average 7.6% with the space ratios by attaching the normal fence at the rear and upper corner and the horizontal normal fence at the rear and lower corner on the prism. In this case, the separated flow at the front and upper corner was reattached on the upper side of the prism and the vortex streets between the prism and plane wall were appeared more slowly than that of prism without fences.