• Economic and Environmental Geology
• /
• v.54 no.6
• /
• pp.671-687
• /
• 2021

This study investigated the firing temperature and thermal deformation process of roof tiles excavated from the connected stone-mound tomb in Seokchon-dong, Seoul, based on mineralogical and physical properties. A large number of roof tiles were excavated from the tomb site and some roof tiles were deformed by heat and were fired in uneven conditions. The colors of original roof tiles and their cores are mostly yellowish-brown, with high water absorption over 12%, containing fine-grained textures and some minerals such as quartz, feldspars, amphibole, and mica. It is estimated that the original roof tiles were fired below 900℃ in oxidation condition, showing loose matrices and mica layers by scanning electron microscopy. However, deformed roof tiles have the uneven surface color of reddish-brown and bluish-gray, and those cross-sections have sandwich structures in which dense reddish-brown surface and porous grey core coexist. They contained mullite and hercynite, so it was estimated to have been fired over 1,000℃, with 0.81~11% water absorption. In some samples, bloating pores by overfiring were observed, which means that they were fired at more than 1,200℃. In addition, the refirng experiments that the original roof tile was fired between 800℃ and 1,200℃ were carried out to investigate the physical and mineralogical properties of roof tiles compared to deformed ones. As a result, the water absorption decreased rapidly and the mineral phase started to change over 1,000℃. As the temperature gradually rises, the matrices are partially melted and recrystallized, resulting in similar thermal characteristics of deformed roof tiles. Therefore, the roof tiles from ancient tombs in Seokchon-dong seem to experience the secondary high temperature of 1,000 to 1,200℃ under uneven firing conditions, resulting in deformation characteristics such as shape transformation and mineral phase transition. It is considered to have been related to cremation rituals at the tombs of Seockchon-dong during the Baekje period.

• Korean Journal of Agricultural Science
• /
• v.16 no.1
• /
• pp.84-101
• /
• 1989

An accurate measurement of size, surface area and volume of agricultural products is essential in many engineering operations such as handling and sorting, and in heat transfer studies on heating and cooling processes. Little information is available on these properties due to their irregular shape, and moreover very little information on the rough rice, soybean, barley, and wheat has been published. Physical dimensions of grain, such as length, width, thickness, surface area, and volume vary according to the variety, environmental conditions, temperature, and moisture content. Especially, recent research has emphasized on the variation of these properties with the important factors such as moisture content. The objectives of this study were to determine physical dimensions such as length, width and thickness, surface area and volume of the rough rice, soybean, barley, and wheat as a function of moisture content, to investigate the effect of moisture content on the properties, and to develop exponential equations to predict the surface area and the volume of the grains as a function of physical dimensions. The varieties of the rough rice used in this study were Akibare, Milyang 15, Seomjin, Samkang, Chilseong, and Yongmun, as a soybean sample Jangyeobkong and Hwangkeumkong, as a barley sample Olbori and Salbori, and as a wheat sample Eunpa and Guru were selected, respectively. The physical properties of the grain samples were determined at four levels of moisture content and ten or fifteen replications were run at each moisture content level and each variety. The results of this study are summarized as follows; 1. In comparison of the surface area and the volume of the 0.0375m diameter-sphere measured in this study with the calculated values by the formula the percent error between them showed least values of 0.65% and 0.77% at the rotational degree interval of 15 degree respectively. 2. The statistical test(t-test) results of the physical properties between the types of rough rice, and between the varieties of soybean and wheat indicated that there were significant difference at the 5% level between them. 3. The physical dimensions varied linearly with the moisture content, and the ratios of length to thickness (L/T) and of width to thickness (W/T) in rough rice decreased with increase of moisture content, while increased in soybean, but uniform tendency of the ratios in barley and wheat was not shown. In all of the sample grains except Olbori, sphericity decreased with increase of moisture content. 4. Over the experimental moisture levels, the surface area and the volume were in the ranges of about $45{\sim}51{\times}10^{-6}m^2$, $25{\sim}30{\times}10^{-9}m^3$ for Japonica-type rough rice, about $42{\sim}47{\times}10^{-6}m^2$, $21{\sim}26{\times}10^{-9}m^3$ for Indica${\times}$Japonica type rough rice, about $188{\sim}200{\times}10^{-6}m^2$, $277{\sim}300{\times}10^{-9}m^3$ for Jangyeobkong, about $180{\sim}201{\times}10^{-6}m^2$, $190{\sim}253{\times}10^{-9}m^3$ for Hwangkeumkong, about $60{\sim}69{\times}10^{-6}m^2$, $36{\sim}45{\times}10^{-9}m^3$ for Covered barley, about $47{\sim}60{\times}10^{-6}m^2$, $22{\sim}28{\times}10^{-9}m^3$ for Naked barley, about $51{\sim}20{\times}10^{-6}m^2$, $23{\sim}31{\times}10^{-9}m^3$ for Eunpamill, and about $57{\sim}69{\times}10^{-6}m^2$, $27{\sim}34{\times}10^{-9}m^3$ for Gurumill, respectively. 5. The increasing rate of surface area and volume with increase of moisture content was higher in soybean than other sample grains, and that of Japonica-type was slightly higher than Indica${\times}$Japonica type in rough rice. 6. The regression equations of physical dimensions, surface area and volume were developed as a function of moisture content, the exponential equations of surface area and volume were also developed as a function of physical dimensions, and the regression equations of surface area were also developed as a function of volume in all grain samples.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.4
• /
• pp.111-123
• /
• 2011

This study aims to present the basic materials, which lead us to preserve the Korea Rice Terrace as scenic sites resources and study it continuously, through researching about the present status and the preservation method of the Rice Terrace in Korea, China and Japan. The results of this study are as follows. First, The Rice Terrace has a traditional agricultural technique which minimizing the damage of the scenic view while cultivating the slope. And also, it has the value of one of the Korea unique traditional scenic views. However, The no cultivation land or disappearing desert land of rice terrace were increasing by the disadvantage of operation in land cultivation. Therefore, The Government must need preparing the base of scene resources excavation by executed the established of Korea Rice Terrace Database for preserving of Korea traditional scene. however it is getting to disappearance. And also, The High valued of Rice Terrace by cultural and scenic view which is must managed by designation of scenic sites or monument. Second, The internal and external reference book researched and analyzed results are as followings for understanding about Korea Rice Terrace feature. First of all, The Rice Terrace's dictionary meaning is just difference by each nations. However, Generally speaking that It means the terraced land by cultivated of sloped land. The Rice Terrace has cross relation with mountain valley and piedmont slope cultivation in location of condition. It occurred era is before approximately estimated from 3000 of years until 6000 of years. It can divide two type by topography shape those are slope and valley type. However, The natural element of forest has very big position in this part. But, The Rice Terrace is just managed and designated by the scenic sites with the Cultural Properties Protection Law. It must needs more binding force and effectiveness for the Rice Terrace scenic view plan establishment by scenic laws and farming and fishing village laws etc. I think that it must need the Rice Terrace related law establishment as soon as possible for efficient preservation and management of the Rice Terrace. Third, The Rice Terrace were researched and analyzed results are as followings those were executed at the Korea, China and Japan. The Korea and Japan have good Rice Terrace Characteristic. And also, The high valued scenic sites area were good managed by the Cultural Properties Protection Law as well as the superior scenic valued Rice Terrace in China. Those are also managed by designated scenic sites for protection and preservation positively. Those were managed by each autonomous district management Department. The each nation's related laws of Rice Terrace protection were just little bit different. However, The basic purpose is same. for example, it based on superior scenic view preservation and protection. Especially, The Japan's Cultural Properties Law and Scenic law linkage, and China Autonomous district legislation and effectiveness. The Korea Government must need above elements for Korea Rice Terrace culture and scenic view preservation. Fourth, We need inducing the owner system and the policy of Rice Terrace preservation promotion association for efficient preservation of Rice Terrace in japan. The owner system in japan gives the owner of the land a permission to rent the land to Rice Terrace preservation promotion association and the local government. In this system the village would be revitalized by commons in the way of the management of the terraces, beautifying the area around the terraces and etc. And also, Making the each village management operating system for Rice Terrace management through educating civilization. The civilization could receive quick help from a consultative body comprised of experts such as representatives of Cultural Heritage Administration and professors. And it is in a hurry to solve the problem of revitalization of the region by exchange between cities and the village.

• Current Research on Agriculture and Life Sciences
• /
• v.1
• /
• pp.67-83
• /
• 1983

The new microsporidia S80 isolated from, Bombyx mori L. in Korea showed ovoid in the morphology of the spores and the size were measured $2.9{\pm}0.28{\mu}$ in length and $1.7{\pm}0.29{\mu}$ width. No other microsporidian spore like this has not been so far isolated from Silkworm. The length of the polar filament extruded in hydrogen peroxide ($H_2O_2$) at $30^{\circ}C$ was $26{\mu}$ of a round cytoplasm on the top. The spores were partly stained with Giemsa, Safranin-O and Gram as the same staining properties as Nosema bombycis, Microsporidia K 79 and other microsporidian spores. The fine structures were observed under scanning eleceron microscope through ultrathin sectioning. The spore wall was composed of three layers ; the thin exospore of an electron dense rippled layer, the thick electron lucent endospore which was thinning considerably at the polar filament insertion point, and the inner limiting membrane. Polar cap present at the sporeapex, with a long polar filament of 12-13 coils, subtending angle of $60^{\circ}$ to spore axis, which is tubular made up of a multilayered and are a benes core, light ring structure enclosing the dance core, the dark ring structure enclosing the inner light ring structure and the other than and light ring structure bounded from cytoplasm. Lamellate polaroplast occupied the anterior part of the spore, and the two neclei with dense nucleoplasm bounded by a double nuclear envelope were cited in the slight downer middle portion of spore. From the characteristics of the shape, size and fine structures, it is certain to reason the Microsporidia S80 belong to the phylum Microspora, class Microspora, order Microsporida, order Microsporida. The shape of two nuclei cited seems to be genus Nosema, but in the classification for the suborder it should be defined wheather pansporoblasts be formed or not and for the genis especial attempts have been made to define the characters which distinguish the disporous genera in the life cycle. Survey through the infection of the bad cocoons during 1980 to 1982 in South Korea the areas contaminated with new microsporidia were revealed 5 provinces of Kyung-Gi, Kang-Won, Chung-Nam and Chun-Nam. Pathological effects inoculated per os at second instar larvae of silkworm, the LD 50 was $7.1{\times}10^7/ml$ as lower pathogenecity than that of Nosema bombycis Naegeli of $1.2{\times}10_7/ml$. While on the other hand the inoculation of the microsporidia at fourth instar larvae lowerd the whole cocoon weight and cocoon shell weight and significant at 1% level. The microsporidia S80 defined it can not be transmitted transovarially from the result of predictive and collective examination of 21 egg batches from the infected female moth.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.38-45
• /
• 1999

This study was to figure out proper Formaldehyde/Urea molar ratio of UF resin with satisfactory bonding strength of plywood and properties of particleboard. The six kinds of UF resins were manufactured with F/U molar ratio 1.0, 1.2, 1.4, 1.6, 1.8, and 2.0. The boards were made of three kinds of raw materials : Veneer, Sliver-Particle and Strand-Particle. Manufacturing condition of plywood : amount of mixing resin was 150g/$m^2$. The fourty secs/mm simple-pressing schedule in the pressure 10kgf/$m^2$ was applied for 480mm${\times}$700mm board at the temperature of $110^{\circ}C$ in a hot press. Manufacturing condition of particleboard : Target density was 0.65g/$cm^2$. The stepwise 9 minutes- multi-pressing schedule in the maximum pressure 40kgf/$cm^2$, the minimum pressure 15kgf/$cm^2$ was applied for $480mm{\times}634mm{\times}12mm$ board at the temperature of $150^{\circ}C$ in a hot press. The results are as follows : I. In bonding strength, plywood which was made by F/U molar ratio 1.2 showed the highest value. Other molar ratio resin also gave the satisfied value of KS standard, 7.5kgf/$cm^2$. 2. In internal bond strength of particleboard, Sliver-Particleboard(SLPB) and Strand-Particleboard(STPB) varied respectively from 5.9kgf/$cm^2$ to 4.8kgf/$cm^2$, from 6.7kgf/$cm^2$ to 5.4kgf/$cm^2$. SLPB with F/U=1.2 and STPB with F/U=1.6 had higher IB value. Also, both SLPB and STPB showed lower IB value in F/U molar ratio 2.0 and 1.0. 3. SLPB and STPB with six kinds of UF resin respectively satisfied bending strength of KS standard 150 Type(130kgf/$cm^2$) and 200 Type(180kgf/$cm^2$). Bending strength data for both of SLPB and STPB showed little or no loss from F/U=1.8 to F/U=1.2. Also, STPB was approximately two times higher than that of SLPB. Therefore, the raw material's shape had more effect on bending strength than the FlU molar ratio. 4. F/U=1.6 and 1.4 showed the lower thickness swelling in SLPB and STPB. All of STPBs satisfied thickness swelling of KS standard, under 12%.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.1
• /
• pp.21-48
• /
• 1974

The studies were carried out to disclose the physical and chemical properties of sericin fraction obtained from silk cocoon shells and its characteristics of swelling and solubility. The following results were obtained. 1. The physical and chemical properties of sericin fraction. 1) In contrast to the easy water soluble sericin, the hard soluble sericin contains fewer amino acids include of polar side radical while the hard soluble amino acid sach as alanine and leucine were detected. 2) The easy soluble amino acids were found mainly on the outer part of the fibroin, but the hard soluble amino acids were located in the near parts to the fibroin. 3) The swelling and solubility of the sericin could be hardly assayed by the analysis of the amino acid composition, and could be considered to tee closely related to the compound of the sericin crystal and secondary structure. 4) The X-ray patterns of the cocoon filament were ring shape, but they disappeared by the degumming treatment. 5) The sericin of tussah silkworm (A. pernyi), showed stronger circular patterns in the meridian than the regular silkworm (Bombyx mori). 6) There was no pattern difference between Fraction A and B. 7) X-ray diffraction patterns of the Sericin 1, ll and 111 were similar except interference of 8.85A (side chain spacing). 8) The amino acids above 150 in molecular weight such as Cys. Tyr. Phe. His. and Arg. were not found quantitatively by the 60 minutes-hydrolysis (6N-HCI). 9) The X-ray Pattern of 4.6A had a tendency to disappear with hot-water, ether, and alcohol treatment. 10) The partial hydrolysis of sericin showed a cirucular interference (2A) on the meridian. 11) The sericin pellet after hydrolysis was considered to be peptides composed with specific amino acids. 12) The decomposing temperature of Sericin 111 was higher than that of Sericin I and II. 13) Thermogram of the inner portioned sericin of the cocoon shell had double endothermic peaks at 165$^{\circ}C$, and 245$^{\circ}C$, and its decomposing temperature was higher than that of other portioned sericin. 14) The infrared spectroscopic properties among sericin I, II, III and sericin extracted from each layer portion of the cocoon shell were similar. II. The characteristics of seriein swelling and solubility related with silk processing. 1) Fifteen minutes was required to dehydrate the free moisture of cocoon shells with centrifugal force controlled at 13${\times}$10$^4$ dyne/g at 3,000 R.P.M. B) It took 30 minutes for the sericin to show positive reaction with the Folin-Ciocaltue reagent at room temperature. 3) The measurable wave length of the visible radiation was 500-750m${\mu}$, and the highest absorbance was observed at the wave length of 650m${\mu}$. 4) The colorimetric analysis should be conducted at 650mu for low concentration (10$\mu\textrm{g}$/$m\ell$), and at 500m${\mu}$ for the higher concentration to obtain an exact analysis. 5) The absorbing curves of sericin and egg albumin at different wave lengths were similar, but the absorbance of the former was slightly higher than that of the latter. 6) The quantity of the sericin measured by the colorimetric analysis, turned out to be less than by the Kjeldahl method. 7) Both temperature and duration in the cocoon cooking process has much effect on the swelling and solubility of the cocoon shells, but the temperature was more influential than the duration of the treatment. 8) The factorial relation between the temperature and the duration of treatment of the cocoon cooking to check for siricin swelling and solubility showed that the treatment duration should be gradually increased to reach optimum swelling and solubility of sericin with low temperature(70$^{\circ}C$) . High temperature, however, showed more sharp increase. 9) The more increased temperature in the drying of fresh cocoons, the less the sericin swelling and solubility were obtained. 10) In a specific cooking duration, the heavier the cocoon shell is, the less the swelling and solubility were obtained. 11) It was considered that there are differences in swelling or solubility between the filaments of each cocoon layer. 12) Sericin swelling or solubility in the cocoon filament was decreased by the wax extraction.. 13) The ionic surface active agent accelerated the swelling and solubility of the sericin at the range of pH 6-7. 14) In the same conditions as above, the cation agent was absorbed into the sericin. 15) In case of the increase of Ca ang Mg in the reeling water, its pH value drifted toward the acidity. 16) A buffering action was observed between the sericin and the water hardness constituents in the reeling water. 17) The effect of calcium on the swelling and solubility of the sericin was more moderate than that of magnecium. 18) The solute of the water hardness constituents increased the electric conductivity in the reeling water.

• Explosives and Blasting
• /
• v.30 no.2
• /
• pp.29-42
• /
• 2012

Variables influencing the free face movement due to rock blasting include the physical and mechanical properties, in particular the discontinuity characteristics, explosive type, charge weight, burden, blast-hole spacing, delay time between blast-holes or rows, stemming conditions. These variables also affects the blast vibration, air blast and size of fragmentation. For the design of surface blasting, the priority is given to the safety of nearby buildings. Therefore, blast vibration has to be controlled by analyzing the free face movement at the surface blasting sites and also blasting operation needs to be optimized to improve the fragmentation size. High-speed digital image analysis enables the analyses of the initial movement of free face of rock, stemming optimality, fragment trajectory, face movement direction and velocity as well as the optimal detonator initiation system. Even though The high-speed image analysis technique has been widely used in foreign countries, its applications can hardly be found in Korea. This thesis aims at carrying out a fundamental study for optimizing the blast design and evaluation using the high-speed digital image analysis. A series of experimentation were performed at two large surface blasting sites with the rock type of shale and granite, respectively. Emulsion and ANFO were the explosives used for the study. Based on the digital images analysis, displacement and velocity of the free face were scrutinized along with the analysis fragment size distribution. In addition, AUTODYN, 2-D FEM model, was applied to simulate detonation pressure, detonation velocity, response time for the initiation of the free face movement and face movement shape. The result show that regardless of the rock type, due to the displacement and the movement velocity have the maximum near the center of charged section the free face becomes curved like a bow. Compared with ANFO, the cases with Emulsion result in larger detonation pressure and velocity and faster reaction for the displacement initiation.

• The korean journal of orthodontics
• /
• v.34 no.3 s.104
• /
• pp.253-260
• /
• 2004

Frictional force between the orthodontic bracket and arch wire during sliding tooth movement is related to many factors, such as the size, shape and material of both the bracket and wire, ligation method and the angle formed between the bracket and wire. There have been clear conclusions drawn in regard to most of these factors, but as to the effect of bracket width on frictional force there are only conflicting studies. This study was designed to investigate the effect of bracket width on the amount of frictional forces generated during clinically simulated tooth movement. Three different widths of brackets $(0.018{\times}0.025'\;standard)$ narrow (2.40mm), medium (3.00mm) and wide (4.25mm) were used in tandem with $0.016{\times}0.022'$ stainless steel wire. Three bracket-arch wire combinations were drawn on for 4 minutes on a testing apparatus with a head speed of 0.5mm/min and tested 7 times each. To reproduce biological conditions, dentoalveolar models were designed with indirect technique using a material with similar elastic properties as periodontal ligament (PDL). In addition, to minimize the effect of ligation force, elastomer was used with added resin, which was attached to the bracket to make up for the discrepancies of bracket width. The results were as follows: 1. Maximum frictional force for each bracket-arch wire combination was: Narrow (2.40mm): $68.09\pm4.69gmf$ Medium (3.00mm): $72.75\pm4.98 gmf$ Wide (4.25mm): $72.59\pm4.54gmf$ 2. Frictional force was increased with more displacement of wire through the bracket slot. 3. The ANOVA psot-hoc test showed that the bracker width had no significant effect on frictional force when tested under clinically simulated conditions(p>0.05).

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.4-12
• /
• 1982

1. Under the request of the Dept. of Navy, U.S.A. this investigation has been done as a part work of the Navy Research Project of Tropical Woods at the Wood Technology Laboratory, School of Forestry, Yale University, New Haven, Conn., U.S.A. 2. In order to determine the equilibrium moisture content and hysteresis loop of three tropical woods (Ocotea, Tablebuia, and Hymenaea) which have not been tested the physical properties, this investigation has made with small thin specimens (1.5"${\times}$1.0${\times}$0.4) under four different controlled relative humidity conditions (that is, 21%, 53%, 60%, and 83%). 3. As the result, the equilibrium moisture content and hysteresis loop of three tropical woods have been shown in the Table and Figures 2, 3 and 4. 4. According to the results, it is concluded that there are the considerable differences in the equilibrium moisture content under the same relative humidity condition and the type of hysteresis loop between different species which have been tested. 5. Desorption of lumber with slightly oscillating humidity of each species tested, has shown on the Table 9 and it has almost the same tendency of results showing the difference between species as the small specimen. 6. Although it is hard to compare the difference of results, E.M.C., and hysteresis between tropical wood and woods from temperate zone, there are, however, still some difference between species. 7. The author wishes to acknowledge my indebtedness to Prof. Wangaard, and Prof. Dickinson for the competent guidance and good advice on this study, and also to Mr. Clanchs for the help in getting materials for the experiment.

• Journal of Korean Medical classics
• /
• v.12 no.2
• /
• pp.56-71
• /
• 1999

1. In the recohnition of cosmos true form, It is compared to the Boundless(無極) the Great Absolute(太極),Yin and Yang(兩儀) throungh the fertilazation process of spermatozoon and ovum. 2. It is explained that principle of unchange through the Form and Action(體 用) relation of the outer appearances and Number (象數) with matching the number of nine and ten to HaDoo(河圖) and RakSye(洛書). 3. Eigth divinations(八卦) being compared to the human body, Care presevation of pregnancy(養胎) is explained that head forms firstly(Gun-I 1乾一), secondly lung(Tae-E 兌二), heart(E-Sam 離三), liver(Jin-Sa 震四), gall bladder(Son-Oo 巽五), kidney(Gam-Yuk 坎六), intestines and stomach(Gan-Chill 艮七), lastly flesh forms(Gon-Pal 坤八). 4. It is explained that process of physiological change of $\ll$Nei Ching The Natural Truth in Ancient Times$\gg$(內經 上古天眞論) by matching boy at the age of 8 to Gan-divination(艮卦), and girl at the age of 7 to Tae-divination(兌卦). 5. The theory of six sons from Gun-Gon(乾坤六子論) is explained by relation of Apriority Eight-divination(先天八卦) obedience and disobedience-left and right. 6. It is explained that form of the human-body and the relationship of the Heart - the Kidney through the Gam(坎) Li(離) - divination 7. The effort of interpretating time and space of the Twelve Horary signs is explanined by season, direction, Five elements(五行), rise and decline, the Three Sum(三合), the Six Sum (六合), the six crash(六衡)'s relation. 8. the process of change from apriority(先天) to postery(後天) in the book of Changes(周易) is explanined by comparing to the phenomenum of nature and the human body. 9. The Energy Satus(氣位) are different from the direction of Eight-divination(八卦) and the properties of the good or bad of herb-drugs are differnt from the place of production. 10. The rightness of realizating the Overlapping-divinations(重卦) are compared to the phenomenum of nature through the Divination Virture(卦德). 11. The dependence-relations of The Twelve Meridians(十二經脈) are explained by-matching January with liver meridian, February with gall bladder meridian, march with heart pericardium meridiam, April with small intestine meridkan, August with lung spleen meridian, jury with stomach meridian, August with lung meridian, September with large intestine meridian, October with urinary bladder meridianm November with kidney meridian. December with triple energizer meridian throng The Twelve Byuk-divination. 12. The process of menstration cycle is explained by The Month symbolizing-divination(月候卦). 13. Through The Trade(交易) prove the reason of feverish sympotoms to use feverish Drug, mill sympotoms to use mill drug of prescription and Heart-Kidneys Consensus(心賢相交) and through The Change(變易), prove the chill and feverish consensus of forechill after feverish, fore feverish after chill and through. The Non-Change(不易) explain the reason of chill sympotoms to use feverish drug, feverish sympotoms to use chill drug of prscription. 14. Ho-divination(互卦) applicate Jxa Sa(佐使) herb drug match of Kun Sin Jwa Sa() theory. 15. According to the Hyo-position(爻位) match the ages, body form and drug by matching Ehight-divination(八卦) to the human body form and function in medicine and the book of Changes(周易) application emphasize the human body Ehight-divination(人身八卦). 16. Throgh the Order-divination(序卦) explain the rightness of Divination Image(卦象) arrangement and all things take shape by cosmo-energy conseusus(宇宙氣交). 17. Throgh the Mixing-divination(難卦) supply the vacancy of medicine and the book of Changes(周易) relationship in the foreword explian the human energy movements, sleep, vomitting, the energy arrival(逮氣), heart pericardium(心包), lung membrane(肺膜) etc.... Like the above sentence medicine and the book of Changes(周易) theory of scholar Tang on the viewpoint of easten-the way Western appliance(東道西器) researching abyss of medicine impart to descendants, so I think that the achievement of medicine and the book of Changes(周易) study is very excellant and I expect that the study Korean Oriental Medicine(韓醫學) theory by means of medicine the book of Changes(周易) reference, will be accelarated.