• Steel and Composite Structures
• /
• 제24권1호
• /
• pp.37-52
• /
• 2017

To quantitatively assess the safety against seismic collapse of eccentrically braced steel frame (EBSF) system, 24 typical EBSFs with K-shape and V-shape braces with seismic precautionary intensities 8 and 9 were designed complying with China seismic design code and relative codes to constitute archetype space of this structure system. In the archetype space, the collapse probability of the structural system under maximum considered earthquakes (MCE) was researched. The results show that the structures possess necessary safety against seismic collapse when they respectively encounter the maximum considered earthquakes corresponding to their seismic precautionary levels, and their collapse probabilities increase with increasing seismic precautionary intensities. Moreover, the EBSFs with V-shape braces have smaller collapse probability, thus greater capacity against seismic collapse than those with K-shape braces.

• 도시과학
• /
• 제7권1호
• /
• pp.5-9
• /
• 2018

The nickel-titanium shape memory alloy (SMA), referred to as Nitinol, exhibits a superelastic effect that can be restored to its original shape even if a significant amount of deformation is applied at room temperature, without any additional heat treatment after removal of the load. Owing to these unique material characteristics, it has widely used as displacement control devices for seismic retrofitting in civil engineering fields as well as medical, electrical, electronic and mechanical fields. Contrary to ordinarty carbon steel, superelastic SMAs are very resistant to fatigue, and have force-displacement properties depending on loading speed. The change for the mechanical properties of superelastic SMAs are experimentally inviestigated in this study when loading cycle numbers and loading speeds are different. In addition, the standardized force-displacement properties of such superelastic SMAs are proposed with an aim to efficiently design the seismic retrofitting devices made of these materials.

• 열처리공학회지
• /
• 제9권3호
• /
• pp.187-197
• /
• 1996

In this study, the properties of coil spring made by Cu-Zn-Al and B added shape memory alloys are investigated. The measurement of recovery displacement and energy with increasing weight, and thermocycling properties have been studied using displacement measuring device. Transformation temperature and phase change by thermocycling have been also investigated by DSC and X-ray diffractometer. Grain size of the alloy is refined from 1.2mm to $400{\mu}m$ by 0.06wt% of B addition. The maximum recovery energy of the coil spring for B added alloy is larger than that of no B added alloy, it is because of grain refinement. And shape memory ability of the coil spring by thermocycling decrease with increasing thermocycling after thermocycle under load. The degradation of shape memory properties of coil spring by thermocycling is improved by B addition.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.452-456
• /
• 1999

Newly constructed plate shape control system, using attached shape measuring instruments and work roll bender, was put in service in No. 2 Plate Mill, POSCO. Recently, customers demand the improvement of flatness and plate crown accuracy. Many competition Plate Mill introducted shape control system, for example, pair cross mill, work roll bender which includes shape measuring instrument and shape control mathematical models, and No. 2 Plate Mill, POSCO introducted work roll bender and shape measuring instruments. This report describes the properties of No. 2 Plate Mill shape control system and work roll bender.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1997년도 가을 학술발표회 논문집
• /
• pp.51-56
• /
• 1997

This study is aimed for investigating the influence of mortar on improved of surface shape of crushed sand, and analyzing the physical properties of fresh state and hardened state. By the test results, it was found that the flow value and bleeding ratio was increased, but the change of flow value according to time was decreased with the improved surface shape of crushed sand. Also, comparing improved of surface shape of crushed sand with not improved of surface shape of crushed sand on strength, compressive strength is about the same and flexural strength decrease in case of improved of surface shape of crushed sand.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 봄 학술발표회 논문집
• /
• pp.110-118
• /
• 2001

In many areas of finite element analysis, elements with special properties are required to achieve maximal accuracy. As examples, we may mention infinite elements for the representation of spatial domain that extend to special and singular elements for modeling point and line singularities engendered by geomeric features such as reentrant corners and cracks. In this paper, we study on modified shape function representing singular properties and algorigthm for the pollution adaptive mesh generation. We will also show that the modified shape function reduces pollution error and local error.

• 전자공학회논문지S
• /
• 제34S권6호
• /
• pp.21-29
• /
• 1997

In this paper, we propose a new approach for recovering 3-D shape and extracting the reflectance properties of surface from intensity images. Photometric stereo method(PSM) is genrally based on the direct illumination. In this paper, the reflectance function is derived by interoduceing the indirect diffuse illumination in PSM and then applied to hybrid reflectance model which consists of two components; the lambertian and the specular reflectance. Under the hybrid reflectance model and the indirect diffuse illumination circumstance, the reflectance properties of sample surface can be extracting by normal sampler and then 3-D shape of an object can be recovered based on extracting reflectance properties. This method is rapid because of using the reference table and simplifies the restriction condition about the reflectance function existing in prior studies. Th erecovery efficiency in our method is better than that in prior studies. Also, this method is applied to various types of surfaces by defining general reflectance function.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.1103-1104
• /
• 2012

• 한국측량학회지
• /
• 제30권2호
• /
• pp.153-162
• /
• 2012

본 연구는 저니키 모멘트 서술자를 이용하여 객체 쌍의 기수성에 영향을 받지 않고 M:N 면 객체 쌍의 형상 유사도를 측정할 수 있는 방법을 제안한다. 제안된 형상 유사도는 저니키 기저함수에 객체 집합의 공간적 분포 영역을 투영하여 얻어지는 모멘트를 이용하기 때문에 형상을 구성하는 객체들의 기수성에 영향을 받지 않는다. 또한 낮은 차수의 기저함수에 대응되는 모멘트는 전역적인 형상을 표현하고, 높은 차수의 기저함수에 대응되는 모멘트는 지역적인 형상을 표현하기 때문에 원형상과 유사한 수준으로 형상을 복원할 수 있는 차수까지의 모멘트를 이용함으로써 효과적으로 형상을 서술하고 비교하는 것이 가능하다. 제안된 방법은 서울시 지역의 도로명주소 지도와 차량용 항법 지도의 건물 객체를 대상으로 적용 및 평가하였다. 기존 중첩면적비를 이용한 유사도에 비하여 제안된 유사도는 기수성의 변화에 강건함을 확인할 수 있었다.

• 소성∙가공
• /
• 제8권1호
• /
• pp.38-46
• /
• 1999

This paper deals with the shape fixability of press formed parts through the use of a V-bending process and a U-bending one. The influence of material properties on the shape fixability in forming processes was investigated. A V-bending process had on optimum ben radius for each combination of parameters which caused maximum shape fixability. In the U-bending process the blank holder force could control the degree of shape fixability. A ha호 blank holding force resulted in a uniform strain distribution and increased shape fixability.