• Fashion & Textile Research Journal
• /
• v.22 no.3
• /
• pp.368-377
• /
• 2020

This study provided basic data to develop functional and fitness cycling wear for cyclists. We analyzed the domestic and overseas cycling wear brand patterns for tops and tights as well as compared pads attached to tights. The results were as follows. The tops of the cycling wear were designed with cutting lines in the lateral or yoke in the back to reflect cycling posture. It is necessary to study if there is a difference in the air resistance or fitness of the athlete. The sleeve hem band affected by arm movement during cycling, proper sewing and band pressure are also important. The tights have a brand that does not insert a band in front of the waist in consideration of the cyclist's breathing. It should take into account methods of constructing a proper garment pressure that does not interfere with cycling. Analyzing the cycling pad indicated that the three-dimensional shape and size of the pad show many differences for each brand, indicating a difference in cycling movement suitability. In addition, many of the cutting lines should account for the productive aspects because of the high consumption of the fabric in order to design a pattern considering the cycling posture.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.1
• /
• pp.39-52
• /
• 2015

This study aims to analyze the characteristics of the male products for urinary incontinence by examining the types and characteristics of those registered in KIPO (Korean Industrial Property Office). Additionally, the types and characteristics, especially for the cloth products and the pads, of male panties for urinary incontinence on the market are analyzed. Men in their 60s with minor symptoms were selected as the subjects to evaluate the wearability. The results are as follows. 11 male products for urinary incontinence, registered in KIPO, are structurally different from those for women by having a separate pocket mainly for absorption. There are one disposable type and 7 cloth types, and the cloth panties can be classified as either united or separable type depending on the detachability of pads from the panties. The types of the panties vary according to the position, shape, and size of the attached pads on normal male panties (boxer, briefs, drawers). The fabrics for the urinary incontinence are usually piled in 3 to 5 layers by having the most absorptive layer on the top, the next with deodorizing characteristics, and the bottom with the waterproof fabric as basics with some additional layers of antibiotic or breathable fabrics. From the wearability test, it has been determined that the panties are not distinguishable in external appearance and the fitness is also not a problem since the size varies as the normal panties. It has been evaluated that the fitness of the panties is an important factor since the pad should be worn in any form; the pad sewed in the middle of the panties was evaluated to be more wearable than having a long pad. In case of separable panties, when the pattern and fabric is similar to the functional panties and the options such as the thickness of the pads or detachability are given to the users, it tends to be more satisfactory.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.120-132
• /
• 1998

This stusy was to investigate the marginal fitness of porcelain-fused-to- metal crown after succesive firing cycle. Main variables were the degree of marginal curvature of labiocervical margin and the type of alloy. The exaggerated marginal curvature(EMC) was created by additional reduction at the faciocervical wall of the normallized marginal curvature (NMC)-typed ivorine tooth by using milling machine. The difference in the shape was the mid facial margin was placed 2mm apical to cemento- enamel junction in labial surface. Three types of alloy were high noble, noble, and base metal alloy. Test specimens were divided into 8 groups and each group had 8 specimens. Sixty four ceramometal crowns were made totally. Measurement stages were following degassing, opaquing. body porcelain firing, and glazing, and measuring sites were 4. (midmesial, midfacial, middistal, and midlingual). Digital, travelling measuring microscope (0.5 um precision, Olympus. Japan) was used under ${\times}250$ magnification. Within the limitation of this investigation, it was concluded as belows: 1. The pattern of marginal distortion was varied. Degassing stage was not a specific, causative stage that induce most of total marginal distortion during whole procedure fabricating a ceramometal crown. Body firing stage induced discrepancy relatively more than other firing stages. 2. The specimens that were Ni-based alloy and had EMC were distorted persistently following successive fabricating procedures. But marginal openings were decreased after glazing. 3. The release of metal grinding-induced stress was presumed as a cause that induce marginal distortion. 4. The amount of discrepancies of the labial and lingual margins were greater than that of the mesial and distal margin in the specimen that had EMC. 5. Silver-plated die was not enough to resist abrasion during repeated seating of metal copings on the die-holding device.

• Journal of the Korean Society of Costume
• /
• v.66 no.3
• /
• pp.75-92
• /
• 2016

The purpose of this study was to prove how sociocultural perspective of obesity, differences in consumers' perception of body and attitudes of accepting obesity affected individuals' clothing behaviors through cross-cultural studies. The data collected were composed of 612 Korean and US consumers in the 20's and 30's that had experiences in purchasing plus-size products. The results were as follows. First, BMI index was lower in Korean consumers than the US consumers, but Korean consumers received more stress from being overweight compared to the US consumers, and had a more negative attitude about their body. Second, although Korean consumers had lower BMI index and degrees of obesity than US consumers, they were severely stressed by obesity and were found to have a higher level of dissatisfaction with their bodies. Third, Korean consumers responded more sensitively to obesity and had a tendency to display a more negative attitude regarding obesity, and a more passive dependence on clothing. Forth, differences in the body shape were reflected even in wearing evaluation, and US consumers showed a more positive attitude toward evaluations of size suitability and fitness. Fifth, the plus-size market for Korean consumers was still not active, and most products purchased were generic brands obtained from online shopping malls through the Internet. However, in the case of the US, in which the ratio of obese people is high and the plus-size market is growing, consumers were purchasing plus-size brands through various distribution online and offline channels. Sixth, Korean consumers were less satisfied than US consumers with shops, sizes and fitness; however, they were more satisfied with design factors. Finally, it is expected that this study can offer practical implications for marketers and product developers running plus-size market for young obese consumers in their 20 and 30s.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.261-268
• /
• 2012

The purpose of this study is to investigate problems of design, fitness, suitability for movement, and wearing comfort of jumper for Korean military tank drivers through analysis of actual wearing condition by questionnaire and field evaluation and to provide basic data for developing its improved design. The survey was done for 477 military tank drivers and evaluation was performed using thermal manikin to measure insulation. The overall satisfaction for design of jumper for military tank driver was over 3.5(likert scale). The overall satisfaction for fitness of jumper for military tank driver was also over 3.5. The satisfactions for material was between 2.39 and 3.13 and the satisfaction for pilling property was the lowest, followed by static property and shape stability after laundering. The satisfactions for movement suitability were standing(3.81), sitting(3,38), raising hand(forward: 2.90, sideward: 3.01), respectively. In insulation evaluation of jumper for military tank drivers and outwears(jacket, jumper), the insulation of jumper for military tank drivers was lower than outwear(jumper) and same with outwear(jacket). The insulation in dynamic and still condition(without wind) of jumper for military tank driver was 0.37clo and 0.31clo, respectively. Its decreation rate in dynamic condition comparing to still condition was 59% which was lower than jacket(0.73clo) and jumper(1.15clo).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.11 s.158
• /
• pp.1507-1518
• /
• 2006

The middle-aged body differs from the youthful body and has its own body type due to the considerable difference in body structure by age. However, most ready-made clothes for middle-aged women are designed according to the youthful body types. They are looking for the better fitness of the ready-made clothes. Thus clothing fitness is strongly required for a middle-aged women. The purpose of this study is to analyze the basic characteristics of middle-aged women's body types and to compare the real somatotype and cognitive somatotype. The subjects are 238 middle-aged women between 35 and 49 years old living in Daegu. Data are collected through anthropometric measurement and questionnaire on somatotype from September to October 2004. The results are as follows: 1. Using factor analysis, cluster analysis is carried out and the subjects of this research are classified into 4 groups. 2. Middle-aged women usually are not satisfied with their body. Particularly, they show the lowest satisfaction measurement about their abdominal girth, weight, and overall body-shape in total 16 categories. 3. As a result of body cathexis for each part, women are usually not satisfied with their body parts for themselves, regardless of real somatotype. 4. As I divide middle-aged women's somatotype by Rohrer index into the groups of three body-types, then examine real somatotype and cognitive somatotype, I get the following result : The slimmer their bodies are, the more satisfied middle-aged women we. Besides, 40.3% of middle-aged women have an incorrect and distorted understanding of their somatotype. 5. As a result of this research for ideal state of body-size, the women shows their Ideal sizes as follow: 160.55cm for ideal height, 88.73cm for ideal bust girth, 71.14cm for ideal waist girth, 90.03cm for ideal hip girth, and 53kg for ideal weight.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.2
• /
• pp.117-128
• /
• 1990

The purpose of this study is to find fitness of brassiere by means of body measuring value, its variation volume, the evaluation of perceptive image, and the evaluation of the sense of wearing. The results were as follows; 1) According to comparison for body measuring value before and after wearing brassiere, bust point (B.P.) height, lower bust height, upper chest circumference, chest circumference, and bust depth are increased, and lower chest circumference, bust point breadth, shoulder middle point - B.P., B.P. -under bust, and cup horizontal girth are decreased. 2) The difference of variation volume by material is not accepted. The part above $20\%$ at variation rate is under the region of the armpit, that is, the region connected arm from the back. 3) The subjects replied that they wore the brassiere in order to compensate the breast and needed to wear it regardless of thiness and obesity. They wore the brassiere in order to dress themselves in good shape, and felt that it put pressure upon the body, while it had nothing to do with adjusting bodily temperature and gave the sense of security. 4) The estimate of the sense of wearing by material is recognized as the difference of the attention at attentive level $1\%$. The multiple factor analysis of each item in the sense of wearing showed that the items which are explained over $90\%$ by common factors are '1. Unpreasant in touch', '2. The part of edge is haggard', '15. Not to be fit'.

• IE interfaces
• /
• v.23 no.4
• /
• pp.337-348
• /
• 2010

The Bass model is the most widely used model in research of new product diffusion because it presents a nice explanation on the diffusion process of new products. However, it has a limitation that its performance of fitness is lower as the available data become less and also, the diffusion curve is bell-shape and so, it can not represent the various diffusion patterns. Recently, a two-pieces Bass model is developed and applied to analyze diffusion of 10 products. The results are encouraging in terms of fitness. However, diffusion pattern is not dealt with in the paper. In this paper, analysis of diffusion pattern is in depth addressed in two-pieces Bass model. It is shown that the diffusion curves are divided into 3 types with respect to the peak adoption rate and each type is divided into 2 types further. Takeoff time of a diffusion process is analyzed by using the inflection point and regime-change time where it represents the point that imitation and innovation parameters change. Empirical studies for 68 products(28 domestic products and 40 USA products) are performed to analyze the diffusion pattern. Findings are that diffusion patterns of all products except 1 USA product show type I and regime-change time becomes shorter as the introduction time of the product is later in domestic products and regime-change time can be regarded as a takeoff time in 47% of total 68 products.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.11
• /
• pp.1768-1773
• /
• 2009

This study determines the body size of preteen children and conducts questionnaire investigations into the awareness of real purchasers or parents of and satisfaction with children's clothes and fit, in order to provide the basic data for planning and setting up the size range for the preteens market in which the sales of children clothes are gradually increasing. The findings of this study are as follow: Analyzing the obesity of the children against the Rohrer index showed that almost 30% of the subjects were obese children and that it is necessary to research the sizes of the clothes for obese children. It was also found that older children selected a more appropriate clothe size. Investigations into the awareness of children on their body image found that there was a significant difference in the perception of body shape, body weight, shoulder breath, arm thickness, chest girt, waist girth, hip girth, and thigh thickness. Slim or standard type children had the greatest consideration for the length of clothes to purchase while obese children had the greatest consideration for bosom size and waist girth. However, in terms of the association between fitness and size selection, obese children did not select a bigger size but an appropriate one for their body. The findings show that it is imperative to develop appropriate size clothes for obese children.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.263-269
• /
• 2011

The digital impression technique has been developed for more precise restorations and convenient procedures in prosthodontic treatment compared to the conventional impression technique. Along with the utilization of CAD/CAM, the introduction of digital impression technique actualizes the digitalization of dental treatments. This case is to compare two different prostheses introducing each procedure in detail; one from CAD/CAM after taking digital impression and the other from the conventional technique. A 22-year-old female visited the clinic with the chief complaint of correction of discoloration and shape on maxillary right central incisor. Due to the trauma 8 years ago, the tooth was endodontically treated with post and resin core. The treatment was planned and the procedures were conducted under the patient's consent to treat the tooth with all ceramic crowns in two different ways for comparison. In conclusion, both prostheses presented clinically acceptable results with comparing the internal fitness of two all ceramic crowns. The prosthesis from digital impression, however, showed more errors in respect of internal fitness.