• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.139-142
• /
• 1999

In this paper, a method of Radome design is considered. The shape is similar to tangent-ogive, and the antenna is a waveguide broad-wall slot array antenna. The characteristic of the Radome material is obtained by measuring test samples. By analyzing the transmission efficiency of the flat plate, Radome wall thickness is determined firstly. And then, the detailed characteristics of the Radome are analyzed by using GO-PO approximation technique. Several simple parameters of the designed Radome are tested and compared with the simulation results.

• Proceedings of the KWS Conference
• /
• 2003.11a
• /
• pp.86-88
• /
• 2003

The characteristic of induction heating solder bump(solder ball: Sn-37Pb, Sn-3.5Ag, Sn-3.0Ag-0.5Cu) has analyzed in this paper. The initial condition of induction heating depends on the time and current. The shape of lead-free solder bump is better than lead solder. The shear strength of lead solder bump has decreased with aging time. The average of shear strength of solder bump is about 10N, 11N, and 11N respectively. The lead-free solder bump's shear strength is better than lead solder and varies irregularly with aging time.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.405-408
• /
• 2001

In this paper, we design tracking filter that get frequency range from 30 to 88 ［MHz］ for FH/BFSK communication system. This filter use for switching componet BJT. as result, This tracking filter has a insertion loss of 0.77~1.93［dB］. And it has a cutoff characteristic 30/3［dB］ shape factor of 3.9~6.2［dB］. The tracking filter satisfy its specification

• Journal of the Korean Statistical Society
• /
• v.36 no.1
• /
• pp.93-109
• /
• 2007

Gamma distributions are some of the most popular models for hydrological processes. In this paper, a very flexible family which contains the gamma distribution as a particular case is introduced. Evidence of flexibility is shown by examining the shape of its pdf and the associated hazard rate function. A comprehensive treatment of the mathematical properties is provided by deriving expressions for the nth moment, moment generating function, characteristic function, Renyi entropy and the asymptotic distribution of the extreme order statistics. Estimation and simulation issues are also considered. Finally, a detailed application to drought data from the State of Nebraska is illustrated.

• Transactions of Materials Processing
• /
• v.8 no.5
• /
• pp.449-453
• /
• 1999

Sheet metal forming process is a non-linearity problem which is affected by various process variables, such as geometric shape of punch and die, frictional characteristic, etc.. Therefore, the knowledge of the influence of the process variables is needed in the design of sheet metal working processes. In this paper, cylindrical cup drawing tests for blank holding force, punch speed and lubrication between sheet material and tool were carried out to investigate the influence upon sheet formability. Experimental results were discussed about the defects on the deformation behaviors during the forming process.

• Journal of electromagnetic engineering and science
• /
• v.15 no.2
• /
• pp.115-119
• /
• 2015

This paper proposes a reconfigurable square-patch antenna with polarization diversity. The proposed antenna consists of a square radiating patch and a Y-shaped feed structure with two PIN diodes. The shape of the feed structure can be changed by adjusting the bias states of the two PIN diodes, which helps switch between two orthogonal linear polarizations. The polarization diversity characteristic is validated by the simulated current distribution and the measured radiation pattern.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.168-170
• /
• 1994

Carbide-tipped twist drill of new type which is better than traditional H.S.S twist drill has been developed successfully to drill steel work-pieces with high speed. This new carbide drill consists of a characteristic flature of special shape of cutting edge, chip pocket, and flute. The special design of the chip pocket and the flute guarantees both periodic fracture and smooth transport of chips along the flute. The carbide-tipped twist drill also allows one to apply more drilling force than conventional one and produce holes with high accuracy.

• Journal of Magnetics
• /
• v.11 no.3
• /
• pp.130-134
• /
• 2006

The microwave power absorption for the patterned CoNbZr magnetic film has been investigated by coplanar waveguide method. The power absorption peaks of the patterned CoNbZr film (50 ${\mu}m$ ${\times}$ 2 mm ${\times}$ 2 ${\mu}m$), were observed at around 5.7 GHz. The observed resonance peak was in good agreement with calculated ferromagnetic resonance frequency including magnetic shape anisotropy effects. Compared with the coplanar waveguide without a magnetic film, the characteristic impedance of patterned film was shown to be increased. This resulted from the large increment of inductance up to 33 % without any significant changes of the capacitance.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.67-73
• /
• 1997

A magnet for urban transit Maglev is designed, analyzed and experimented to evaluate and to improve its characteristic. FEM is also used to calculate magnetic field density, magnetic force, leakage flux and losses. Seven cases of magnets are analyzed and tested for verifying the calculated characteristics and for optimizing the shape. Using the results, an improved levitation magnet is proposed for the vehicle.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.335-338
• /
• 2010

A recent study for tracing the profiles of supersonic axisymmetric Minimum Length Nozzle with uniform and parallel flow at the exit section, the stagnation temperature is taken into account. The aim of this work is to add optimization algorithm to the supersonic nozzle design in order to get the optimum nozzle shape. The comparisons of the nozzle contours based on the method of characteristics are presented. The specific heats and their ratio vary with the stagnation temperature when this temperature of a perfect gas increases. An application is made for air in a supersonic nozzle.